Harman Kardon 350SE - Manuals

CONTENTS Ready Getting to Know your camera 7 Safety note 8 Identification of features 10 Product Exterior 10 Viewfinder 12 LCD monitor indicator 14 LCD monitor menu indicator 16 Preparation 19 Connecting to Power 19 Using the batteries 19 Using the AC power adapter 20 Attaching the strap 20 Insertin...

GETTING TO KNOW YOUR CAMERA About the image mark Prior to using this camera, please read the user manual thoroughly. Keep the manual in a safe place. This manual contains instructions on using this camera that will help you to use this camera safely and correctly. This will help prevent danger and i...

IDENTIFICATION OF FEATURES Product Exterior (Front / Top / Bottom) Flash Shutter button (page 30) Microphone Mode dial (page 25) Strap eyelet Lens Self-timer lamp Viewfinder Flash fading control sensor Speaker Mode dial Lamp Battery chamber cover / Card cover Tripod socket

IDENTIFICATION OF FEATURES Product Exterior (side) Viewfinder Close range picture area mark Picture area frame Optimum picture area over 1.5m Autofocus frame Optimum picture area within 0.8m ~ 1.5m DC input connection point (DC IN 6V) USB connection terminal Video connection terminal

IDENTIFICATION OF FEATURES READY Reference Vertical and Horizontal shots are taken in the same way. Avoid obstructing the lens or the flash when you take a picture. Note As there can be some differences between what is seen through the Viewfinder and the resulting image when taken at a range closer ...

IDENTIFICATION OF FEATURES LCD monitor indicator The LCD monitor displays information about the shooting conditions. Shot mode Whenever you press the LCD button, the LCD monitor will change in the following order : Image & Status Image only LCD Off. 1 Shot mode indicators 2 Battery indicator pag...

IDENTIFICATION OF FEATURES READY 9 Exposure compensation page 47 10 Zoom / Digital Zoom page 33 11 Number of available shots remaining 12 Image size / Continuous shot page 41/45 13 Image quality page 42 14 Sharpness page 43 15 ISO page 49 16 Date / Time page 24 17 Sound recording page 38 9999 ISO 20...

IDENTIFICATION OF FEATURES LCD monitor menu indicator Each mode has a menu as shown below. The default settings in each mode are printed below. SIZE : select image size(page 41) QUALITY : select image quality (page 42) SHARPNESS : select image sharpness (page 43) EFFECT : add effect to image (page 4...

PREPARATION Connecting to Power READY There are two ways in which to provide the camera with power. You can use batteries(AA Alkaline or CR-V3), or alternatively, you can use an AC Adapter (DC 6V / 2.0A). Using the batteries 1 Open the battery chamber cover by pushing in the direction of the arrow. ...

PREPARATION Using the AC power adapter If you have access to a mains supply, using an AC Adapter allows the camera to be used for long periods of time. If you connect the camera to a computer, it is advisable to use an AC adapter, as this will enable extended use. Plug the adapter into the connectio...

READY PREPARATION Inserting the CF CARD 1 Pull the card cover in the direction of the arrow to open. 2 Insert the card towards the arrow. The front side of the CFCARD (printed arrow) and the front side of the camerashould face in the same direction when the card is inserted. 3 To close, push the car...

READY PREPARATION Instructions on how to use the CF CARD Using a new CF CARD for the first time Before using the CF CARD, it must be initialized. Initializing prepares the CF CARD for recording data. For more details, please refer to page 67 Preserving the CF CARD data If the card is subjected to an...

PREPARATION Selecting the date and time You can record the date and time with the image data in the CF CARD when you take an image.You will need to check and select the correct Date / Time when :The camera is used for the first time. The batteries have been removed for a period longer than 1 hour. 1...

READY CAMERA WORKING MODE Camera working mode You can select the desired working mode by using the mode dial located on the top of thecamera.This digital camera has 6 working modes. These are listed below STILL IMAGE mode ( )This mode is used for macro shots between 0.2m ~ 0.8m,normal images from 0....

TAKING PHOTOS Now let's take a picture 1 To switch on the camera, press the POWER button ( ). Pressing the power button over 2 seconds changes the SOUND setting to OFF, thoughyou have set the setting to ON.If you wish to hear the buzzer sound, set the setting to ON. 2 Select the desired mode (Still ...

SETTING UP SHOOTING FUNCTION Movie clip shot In a movie clip shot, sound and movie clip are recorded at the same time. When the mode dial is rotated to MOVIE CLIP mode, the LCD monitor will be displayed as shown below. Press the shutter button once and movie clips are recorded for as long as the ava...

POWER button - Used for turning the camera power on / off. - The camera power will be turned off automatically during periods of inactivity. This is done to reduce battery drain. The camera can be reactivated by pressing the power button again. SHUTTER button - Used for taking images in shot mode (S...

ADV ANCED SETTING UP THE SHOOTING FUNCTION MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : STILL IMA...

SETTING UP THE SHOOTING FUNCTION Used for macro shots (0.2M ~ 0.8M).In dark conditions, the autofocus may not function. If this occours, press the FOCUSbutton and you can select fixed focus manually. 1. Turn the camera power on.2. Rotate the mode dial to the shot mode (Still image, Night scene, Movi...

ADV ANCED SETTING UP THE SHOOTING FUNCTION ZOOM (W/T) button Used for digital or optical zooming in / out (Still image, Night scene, Movie clip).This camera has a 3X optical zoom and a 2 X digital zoom function. Using both will offer atotal zoom ratio of 6 X.When you press the zoom (W/T) button, the...

ADV ANCED SETTING UP THE SHOOTING FUNCTION OK button Used as a confirming data that is changed by using / / / buttons. FLASH / LEFT button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to the left or to the main menu. When the menu is not displayed on the ...

SETTING UP THE SHOOTING FUNCTION Flash mode indicator Reference Using the flash frequently will reduce the life of the batteries.Under normal operating conditions the charging time for the flash is normally within 7seconds. If the batteries are weak, the charging time will be longer.The default of e...

ADV ANCED SETTING UP THE SHOOTING FUNCTION METERING / Down button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to down or changes the sub menu.When the menu is not displayed on the LCD monitor, the button operates as the METERING button. This button can b...

SETTING UP THE SHOOTING FUNCTION Using the LCD monitor to adjust the camera Shooting functions can be changed by using the LCD monitor.In the shot mode, pressing the MENU button displays the menu on the LCD monitor.The following functions are available, depending on the mode you have selected (Still...

ADV ANCED SETTING UP THE SHOOTING FUNCTION SIZE In STILL IMAGE and NIGHT SCENE mode, you can select the image size.A large image uses more memory, so increasing image size will reduce the total number ofshots you can store on a CF CARD. The image sizes are listed below. 1. Turn the camera power on. ...

SETTING UP THE SHOOTING FUNCTION QUALITY In STILL IMAGE, NIGHT SCENE modes, you can select the image data compression rate.The higher the QUALITY setting, the better the final image will be. However, the high quality setting willrequire more memory and therefore reduce the number of images you can s...

ADV ANCED SETTING UP THE SHOOTING FUNCTION SHARPNESS In the STILL IMAGE mode, you can select image sharpness.Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject matter. 1. Turn the camera power on. 2. Rotate the mode dial to STILL IMAGE mode. 3. Do not turn the LCD monitor off...

SETTING UP THE SHOOTING FUNCTION EFFECT Using the camera’s digital processor, it is possible to add special effects to your images.In STILL IMAGE or MOVIE CLIP mode, select the desired [EFFECT] sub menu. 1. Turn the camera on. 2. Rotate the mode dial to STILL IMAGE mode or MOVIE CLIP mode. 3. Do not...

ADV ANCED SETTING UP THE SHOOTING FUNCTION SHOOTING This allows continuous shooting. In this mode, you can take moving subjects continuously. Once a continuous shooting sequence has been completed, the camera resets to single shooting mode. 1. Turn the camera on. 2. Rotate the mode dial to STILL IMA...

ADV ANCED SETTING UP THE SHOOTING FUNCTION EXPOSURE This camera automatically adjusts the exposure according to the ambient lighting conditions. However, you can select the exposure value by using [EXPOSURE] sub menu. This function can be used in STILL IMAGE and MOVIE CLIP mode. If you increase the ...

ADV ANCED SETTING UP THE SHOOTING FUNCTION SCENE In NIGHT SCENE mode, Select the desired SCENE mode. - [PORTRAIT] mode ( ) : This is used for both portrait and landscape shots. - [LANDSCAPE] mode ( ) : This is used for landscape shots. 1. Turn the camera on. 2. Rotate the mode dial to the NIGHT SCEN...

SETTING UP PLAY BACK FUNCTIONS Starting Play Mode - Turn the camera on and select ( ) on the mode dial. The camera can now play back the images stored on the CF CARD. Sound can also be added to images in this mode. - You can setup the PLAY mode function by using the camera buttons and LCD monitor. -...

ADV ANCED SETTING UP PLAY BACK FUNCTIONS Setting up play back function by using the camera button THUMBNAIL / ZOOM W button You can view up to 9 images at a time by using the THUMBNAIL function. 1. Turn the camera on.2. Rotate the mode dial to PLAY mode.3. An image displays on the LCD monitor.4. Pre...

SETTING UP PLAY BACK FUNCTIONS ZOOM W / ZOOM T button When viewing a single image in PLAY mode, use the zoom T button to enlarge theselected image. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode. 3. Select the desired image. 4. Enlarge the image up to the desired scale of enlargement by...

SETTING UP PLAY BACK FUNCTIONS DELETE button This deletes image stored on the CF CARD. 1. Turn the camera power on. 2. Rotate the mode dial to PLAY mode. 3. Press the LEFT ( ) / RIGHT ( ) buttons to select image that you wish to delete. 4. When you press the DELETE button, a message will be displaye...

SETTING UP PLAY BACK FUNCTIONS 1. Turn the camera power on.2. Rotate the mode dial to PLAY mode( ).3. Press the LEFT ( ) / RIGHT ( ) buttons to select a sound recorded still image or a movie clip. Or, select slide show. 4. Press PLAY & PAUSE button. PLAY & PAUSE explained If an image is show...

ADV ANCED SETTING UP PLAY BACK FUNCTIONS Setting up play back function using the LCD monitor SLIDE SHOW Images can be displayed continuously at pre-set intervals. 1. Turn the camera power on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD monitor. 4....

SETTING UP PLAY BACK FUNCTIONS PROTECT This is used to protect specific shots from accidental erasing (LOCK). It also releases images that have been previously protected (UNLOCK). 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD ...

SETTING UP PLAY BACK FUNCTIONS DELETE ALL This enables you to clear all unprotected images from the CF CARD. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. 1. Turn the camera on. 2. Rotate the mode dial to PL...

ADV ANCED SETTING UP PLAY BACK FUNCTIONS FORMAT This is used to format the CF CARD. all images INCLUDING protected images will be deleted. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD monitor. 4. Press the DOWN button( ) and ...

SETTING UP PLAY BACK FUNCTIONS DPOF (Digital Print Order Format) DPOF stores printing information onto the CF CARD, enabling you to have images printed directly from the CF CARD.Images can then be printed on DPOF printers, or at an increasing number of photo laboratories.This function is not adjuste...

ADV ANCED SETTING UP PLAY BACK FUNCTIONS INDEX This function will specify the number of copies (except for movie clips) for index print. The maximum number of images for index print are 500. 1. Turn the camera on.2. Rotate the mode dial to PLAY mode( ).3. Press the MENU button to display [PLAY 1/2] ...

SETTING UP PLAY BACK FUNCTIONS REVIEW You can review specified number of STANDARD or INDEX copies. 1. Turn the camera on.2. Rotate the mode dial to PLAY mode ( ).3. Press the MENU button to display [PLAY 1/2] menu on the LCD monitor. 4. Select [PLAY (DPOF) 2/2] menu by pressing the LEFT ( ) / RIGHT ...

ADV ANCED SETTING UP THE CAMERA SYSTEM Starting Set up mode FILE NAME This enables you to name files- SERIES type : Under this system, the file name will directly follow the last stored file name, regardless of any actions such as file deletion or re-formatting. - RESET type : Using reset, the next ...

SETTING UP THE CAMERA SYSTEM 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ). 3. A menu will display on the LCD monitor. 4. Press the DOWN button ( ) and select [FILE NAME]. 5. Shift the cursor to the [FILE NAME] sub menu by pressing the RIGHT button ( ). 6. Select the desired sub ...

ADV ANCED SETTING UP THE CAMERA SYSTEM LANGUAGE There is a choice of languages that can be displayed on the LCD monitor.ENGLISH, GERMAN,FRENCH,SPANISH,CHINESE and KOREAN are available. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ). 3. A menu will display on the LCD monitor. 4. Pr...

SETTING UP CAMERA SYSTEM DATE SETUP This alters the time and date stored with the images. Range: 2001 ~ 2050 year (leap years and months are corrected automatically). The default is 2002/03/01 00:00. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode( ). 3. [SETUP 1/3] menu will be displa...

ADV ANCED SETTING UP CAMERA SYSTEM IMPRINT There is an option to include DATE/TIME on still images.There are 3 types of IMPRINT.- OFF: IMPRINT function is cancelled.- DATE: The date is included in the still image.- DATE & TIME: The date and time is included in the still image.This function is no...

SETTING UP CAMERA SYSTEM DATE TYPE You can select date type that is imprinted on the image. - YYYY/MM/DD : year /month/ day - DD/MM/YYYY : day /month /year - MM/DD/YYYY : month/ day /year 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ). 3. [SETUP 1/3] menu will show on the LCD moni...

ADV ANCED SETTING UP CAMERA SYSTEM USER SET User can save the sub menu, that is returned to default when the camera power is off, as user preferences. Only marked sub menu in the [TABLE 1] can be applied to USER SET function. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode( ). 3. [SETU...

SETTING UP CAMERA SYSTEM LCD You may adjust the LCD brightness. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode( ). 3. [SETUP 1/3] menu will display on the LCD monitor. 4. Select [SETUP 3/3] menu by pressing the LEFT ( ) / RIGHT ( ) buttons. 5. Press the DOWN button ( ) and select [LCD...

ADV ANCED SETTING UP CAMERA SYSTEM VIDEO OUT The Video output signal from the camera can be NTSC or PAL. Your choice of output will begoverned by the type of machine (monitor or TV, etc.) to which the camera is connected.Select the correct video standard for the outer monitor. PAL mode can support o...

CONNECTING TO AN EXTERNAL MONITOR Connecting to an external monitor In STILL IMAGE or PLAY mode, you can view the stored images or movie clips by connecting the camera to an external monitor via the video cable. When the camera is connected to an external monitor, the LCD monitor will be turned off ...

ADV ANCED PC MODE Functions of PC mode Note The USB Storage Driver must be installed before using PC mode. Refer to page 90 regarding installation. To save battery power, it is recommended that you use an AC adaptor(Optional) when connecting the camera to a computer Downloading stored images Once yo...

IMPORTANT NOTES Caution! Your new Samsung camera is a precision instrument. Whilst it is designed to withstand general wear and tear, there are some important points that will help you get maximum service and reliability from your camera. The following should be avoided : Severe changes in temperatu...

IMPORTANT NOTE Warning indicator There are several warnings that may appear in the LCD display : Warning message NO CARD ! NO IMAGE ! CARD FULL ! CARD FAIL ! LOW BATTERY ! Reason for message No CF CARD. The camera cannot recognize the CF CARD. There are no images stored on the CF CARD. There is insu...

BEFORE CONTACTING SERVICE CENTER Please check the following ADV ANCED Symptom The camera will not switch on. The camera powers down whilst in use. The batteries are exhausted. Camera is turned off automatically due to the Auto power function. Adapter plug is not connected securely. Batteries drain q...

SPECIFICATIONS 1/1.8” CCDApprox. 3.2 Mega pixelsApprox. 3.3 Mega pixelsf = 7.0 ~ 21.0mm (35mm film equivalent : 34 ~ 102mm)F2.6 ~ F4.7Still Image mode : 1.5X, 2XPlay mode : Small 1.5X, Medium 1.5X ~ 3X (0.5X steps), Large & Photo 1.5X ~ 5X (0.5X steps) Real image optical viewfinder 1.5" colo...

About softwares USB Storage Driver This camera uses USB Storage Driver as the camera driver. You can use the camera asa USB card reader. After installing the driver and connecting this camera to the PC, youcan find [Removeable Disk] in [Windows Explorer] or [My computer].USB Storage Driver is provid...

SOFTW ARE HOW TO SET UP THE SOFTWARE FOR WINDOWS How to set up the software Inserting the CD-ROM provided with this camera into the CD-ROM drive, the following frame is automatically run. 1.Driver : This enables image to transfer between the camera and PC. Driver installation for Windows : refer to ...

HOW TO SET UP THE SOFTWARES FOR WINDOWS Setting up USB driver for Windows 1 Click [ Storage Driver] menu on the Autorun frame and the ‘InstallShield Wizard’ Window will open. Click [ Next > ]. 2 [ Storage Driver ] installation has started. 3 Installation is complete. Click [Yes, I want to restart...

HOW TO SET UP THE SOFTWARES FOR WINDOWS Setting up Digimax Viewer This software is only compatible with Windows. 1 Click [Digimax Viewer] on the Autorun frame . 2 Installation window will display as shown alongside. Click [Next]. 3 The Software License Agreement window will display. If you agree to ...

HOW TO SET UP THE SOFTWARES FOR WINDOWS Setting up the MGI PhotoSuite lll SE 2 Select language. 3 A Welcome window will be displayed. Click [Next >] to move to the next step. 4 The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to...

SOFTW ARE CONNECTING THE CAMERA FOR WINDOWS Connecting USB cable to the Camera for Windows To download images, you will need Windows 98 or later and a USB port on your computer. 1 Connect the USB cable to the USB port on the computer. 2 Connect the other end of the USB cable to the USB connection te...

REMOVABLE DISK Note Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disco...

HOW TO USE THE SOFTWARES Digimax Viewer This software is only compatible with Windows. To open Digimax Viewer, click the [ Start Programs Samsung Digimax Viewer 1.0 Digimax Viewer 1.0 ] and Digimax Viewer 1.0 will then open. The stored images will display as thumbnail image. You can easily copy, mov...

SOFTW ARE HOW TO USE THE SOFTWARES MGI PhotoSuite SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs MGI PhotoSuite lll SE MGI PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open.

HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE GET To obtain images from the computer 1 To acquire images,Click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel. 2 The Open file selector...

HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE PREPARE When the image is loaded, the step changes to Prepare automatically. Menu of [PREPARE] step Rotate & Crop You can rotate, flip or crop images along with a host of others. Touchup Remove Red eye, Remove Scratches etc.. are available in this m...

SOFTW ARE HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE COMPOSE Add Text , Compound Images etc.. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts acti...

HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE ORGANIZE Organize your photos and other media files into albums. Menu of [ORGANIZE] step Choose a photo album to view or edit Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album.. : Open Master Album. Selec...

HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE SHARE Saving images 1 Saving or sharing images. Menu of [SHARE] step Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images. Slide Show Viewing images as a slid...

SOFTW ARE HOW TO USE THE SOFTWARES MGI PhotoSuite lll SE Reference For more information, please refer to the Help file in [Help MGI PhotoSuite lll help]. PRINT Printing images 1 You can print images. Menu of [PRINT] step Print Printing images. Print Multiples Print multiple copies of a photo or proj...

REMOVING THE USB DRIVER FOR WINDOWS Removing USB Driver for Windows 1 Click [Add/Remove programs] in Controller. 2 After selecting [Samsung Digimax 350SE Camera], click [Add/Remove] and the following window will display. 3 Click [OK] and USB driver will be removed automatically.

CONNECTING THE CAMERA FOR MAC Connecting USB cable to camera for macintosh The USB port has to be in the Macintosh or keyboard. 1 Connect the USB cable to the USB port on the Macintosh. 2 Connect the other end of the USB cable to the USB port of the camera 3 Set the mode dial ( ). 4 Switch the camer...

SOFTW ARE HOW TO INSTALL AND USE THE USB DRIVER FOR MAC Setting up USB Driver for MAC 1 USB Driver for MAC is not included with the Application CD as MAC OS support the camera driver. 2 Check MAC OS This camera is available in MAC OS 9.X or later. 3 Connect the camera to the Macintosh and turn the c...

FAQ About USB Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. If you use batteries, check the battery condition. [Case 2] The mode dial is not set to PC mode. Rotate the mode...

FAQ About USB [Case 7] There is an unexpected error during file transfer. Turn the camera power off and on again. Then transfer the file again. [Case 8] How do I know my computer supports USB Interface? Check the USB port in your computer or keyboard. Check OS version. USB Interface is available in ...