Harman Kardon 231 - Manuals

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

2 WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING: KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS DO NOT USE THIS APPARATUS NEAR WATER CLEAN ONLY WITH A DRY CLOTH. DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITHTHE MANUFACTURER’S INSTRUCTIONS. DO NOT...

Page 3 - ELECTROMAGNETIC; DECLARATION OF

3 U.K. MAINS PLUG WARNING A molded mains plug that has been cut off from the cord is unsafe.Discard the mains plug at a suitable disposal facility. NEVER UNDERANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUTMAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use themains plug without the fuse cover in...

Page 4 - User Manual; Table of Contents

4 User Manual 2-Series Table of Contents Safety Info ...............................................................3Service Contact Info ...............................................4Warranty ..................................................................5Introduction and Features................

Page 5 - Warranty; The warranty registration card that accompanies this product; must be; mailed; years

5 User Manual 2-Series Warranty This warranty is valid only for the original purchaser and only in the United States. 1. The warranty registration card that accompanies this product must be mailed within 30 days after purchase date to validate this warranty. Proof-of-purchase isconsidered to be the ...

Page 6 - Verify that the equalizer’s package contains the following:

6 User Manual 2-Series Congratulations on your purchase of a dbx 2-Series Graphic Equalizer. The 2-Seriesrepresents a major step forward in the performance of entry-level graphic equalizers.From their amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range,internal torodial transformer,...

Page 7 - Operating Controls; Front Panels; This red LED lights when the EQ is in bypass mode. Note that; Boost/Cut Range Selection Switch and LEDs:; This switch selects which of the two; Output Level Bar Graph:; These four LEDs indicate output level of the equalizer.; Frequency Band Slider Controls:; Each one of these slider potentiometers will boost; Low Cut Enable Switch; The LOW-CUT switch inserts or removes the 18dB/octave

7 User Manual 2-Series Operating Controls Front Panels Input Gain Control: This control sets the signal level to the equalizer. It is capable of - 12dB to +12dB of gain. Its effect is apparent by viewing the OUTPUT LEVEL BAR GRAPH. EQ Bypass: This switch removes the graphic equalizer section from th...

Page 8 - EQ T; the setting of this switch as it may generate an audible transient.

8 User Manual 2-Series C ONNECTING T HE EQ T O Y OUR S YSTEM The 2-Series Equalizers have balanced inputs and impedance balanced outputs thatcan be used with any balanced or unbalanced line-level device. To connect the equalizer to your sound system refer to the following steps: • Turn off all equip...

Page 10 - Electronically balanced/unbalanced, RF filtered

10 User Manual 2-Series Insert the graphic equalizer between the signal source (usually a mixer) and thepower amplifiers (or the crossover if there is one). Adjust the level and equalization asrequired to yield the desired system response. For optimum signal-to-noise response, the gain structure of ...

Page 11 - A Harman International Company; The Professional’s Choice In Signal Processing; Available Through CP Communications -

A Harman International Company 18-1333-A ® The Professional’s Choice In Signal Processing Available Through CP Communications - www.cpcomms.com