Hansgrohe 17010XX1 - Manuals

Technical Specification Hole size in mounting surface Minimum 1-3/8” Maximum 1-5/8” Maximum mounting surface depth 1-1/4” Flow rate . GPM Maximum operating pressure 145 PSI Recommended operating pressure - 7.5 PSI Recommended hot water temp 10 o - 140 o F* M3 cartridge with Boltic TM handle screw *S...

3 Install the faucet Place the faucet and sealing ring on top of the mounting surface. Install the mounting flange over the stud. Thread the collar onto the stud until the mounting flange is firmly against the bottom of the mounting surface. mounting flange stud collar sealing ring Secure the supply...

4 Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the threads with two layers of Teflon tape and replace. Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the...