HANNspree T262 - Manuals

5 Description of Warning Symbols Before You Proceed 1. Read all Safety Notices and instructions in this User ’s Manual carefully before either plugging in or turning the TV on. 2. Keep this User ’s Manual in a safe place for future reference. Keep the box and packaging in case the TV needs to be shi...

6 Safety Notices Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system. You may, however, use an antenna indoors if it is placed in a location free from interference. Location Avoid...

7 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with manufacturer ’s instructions....

11 Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating yo...

12 Copyright © Copyright 2006 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspre...

13 BBE, SRS, HDMI License Statements Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. BBE ViVA HD3D (High Definition 3D) Sound provides musicall...

14 1 Getting Started 1.1 Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV• User's manual• Quick start guide• Warranty and service manual• Power cord• Remote control and batteries...

15 1.2 Introducing the TV You can watch PAL/SECAM broadcast or cable television channels, and easily connect a VCR, STB or DVD player to the standard CVBS, S-Video and SCART input ports (location of these ports depends on model). You can also use the TV as a monitor for your PC by connecting it thro...

17 1.2.3 Input and Output Jacks For European (EU) models Description Connector Function AV1(SCART1) Use the AV1 input to connect an external device, such as a VCR, STB, or a DVD player with composite / RGB output. Audio Input (R/L)Video Input (RGB/V)Audio Output (R/L)Video Output (V) AV2(S/V/L/R) Us...

21 1.2.4 Remote Control Description Icon Function Menu Press this button to turn the On-Screen Display (OSD) menu on and off. Arrow Press S / T / W / X to scroll through the on-screen display menus. In memory card mode, press the arrow buttons to navigate menus, or to pan a picture when zooming in o...

22 Select channel(AP models) CH S / CH T Changes channels. Press CH S to increase the channel number. Press CH T to decrease the channel number. (Press CH S / CH T or numbers buttons to have all sources return to TV mode.) Select channel(EU models) P S / P T Changes channels. Press P S to increase t...

23 Wide Press this button to switch between wide screen and other modes (4:3 – 16:9). (Panoramic mode is available only for selected models.) In memory card mode, press this button to stop proceeding operation. Hold Press this button to hold. In memory card mode, press this button to go to the next ...

25 Light Press this button to activate the remote control backlight. When you press a button, the backlight will turn off. To turn it back on, press this button again. Description Icon Function Li ght

26 1.2.5 Teletext Mode Description Icon Function Numbers (0-9) Use the number keys to enter the teletext page number directly. Favorite The color keys are used with the icons at the bottom of the Teletext page. Arrows Use the right and left keys to go to the desired page. Wide Increases the zoom mag...

27 1.2.6 Inser ting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control. 2 Insert the batteries paying attention to the polarity markings inside the battery compartment. 3 Replace the battery compartment cover.

29 2 Setting up your TV 2.1 Basic Connections The following sections provide users with some basic instructions to use the TV. Please read them carefully before you start utilizing the functions. 2.1.1 Connecting the Power Cord and Tur ning On 1 Connect the power cord to AC IN input jack on the rear...

31 2.2 Connecting Exter nal Devices Connect external devices such as VCRs, STBs, or DVD players to the TV using the AV1, AV2, AV3, AV4 and AV5 ports on the back or side of the TV. Note:AV5 is for AP market only. 2.2.1 Connecting Exter nal Ear phones External earphones may be used to listen to the TV...

32 2.2.2 Connecting an Amplifier Using Analog Audio Connect an external amplifier or speakers to the line out port to provide better sound quality. Refer to the following illustration. Note: External amplifier or powered speakers are not included with the TV . R L Optical OUTPUT ( AUDIO ) L R Line o...

33 2.2.3 Connecting an Amplifier Using Digital Audio Use the optical digital out connector to connect an audio decoder or audio/video processor. Refer to the following illustration to connect optical digital out. Note:The supporting devices mentioned in this manual may vary on different models. For ...

34 2.2.4 Connecting a Decoder/VCR/Recorder or DVD Player Using SCART (EU models only) Use the SCART provided to connect a TV to a VCR, Recorder, DVD player or Decoder. Refer to the diagrams on the following page when reading the following instructions. Notes: • The output function of AV3 is availabl...

37 3. Connecting a DVD Player: • Connect the SCART cable to the AV1 or AV3 input at the back of the TV and to the SCART connector on the DVD player. It is preferable to connect peripherals with RGB output to AV1 as RGB provides a better picture quality. Note:Refer to the user ’s manual included with...

38 2.2.5 Connecting a VCR/STB/DVD Player Using Component Video The following illustration shows how to connect the TV to a VCR / STB / DVD player using the AV4 (for EU models) or AV4/AV5 (for AP models) component video ports. Actual connections may vary according to the make and model of your device...

39 2.2.6 Connecting a VCR/STB/DVD Player Using Composite Video The illustration presented here shows how to connect your TV to a VCR / STB / DVD player using the AV2 (for EU models) or AV1/AV2 (for AP models) composite video port. Actual connections may vary according to the make and model of your d...

41 2.2.8 Connecting a PC Connect the TV to your PC to use it as the monitor using the D-Sub port as shown. Connect the D-Sub port of the TV to the D-Sub output of the PC. Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC. Notes: • Location of the conne...

42 2.2.9 Connecting HDMI HDMI (High Definition Multimedia Interface) with HDCP (High Definition Copy Protection) assures that the best video signal is always sent from source (HDTV signal, DVD player) to the TV. Refer to the following illustration to connect an HDMI device to the TV. Notes: • When t...

43 2.3 Inser ting a Memor y Card (For built-in E-Card only) 1 Insert the memory card(s) into the appropriate card reader slot(s)on the control panel of the TV as shown. 2 Push the card(s) gently until they stop. Make sure the card(s) are inserted in the correct way. 3 When inserted, the memory card(...

48 2.5 Using the E-Card Function (For built-in E-Card only) The E-Card function enables you to view photos, watch movies, and listen to MP3 files on the memory card inserted in the card slot. The device supports Compact Flash (CF), Micro drive (MD), Smart Media (SM), Secure Digital (SD), Multi Media...

53 5 Press the X / T / button to go to the next picture. Press the W / S / button to go to the previous picture. Note:If the image is not in the standard size/resolution (i.e. 800x600, 1024x768), it may appear deformed or with a blue/black background. Zooming and Panning The E-Card function enables ...

54 Viewing a Slide Show The E-Card function has a slide show feature that enables you to view all the images by order. 1 Press on the remote control to start the slide show. The files are viewed sequentially, and files in your music library are also played in sequence. 2 Press again to stop the slid...

55 Transition Table Tr an sition Description 1 FULL SCREEN Image appears full screen. 2 ROLL: TOP TO BOTTOM Image rolls in from top to bottom. 3 ROLL: BOTTOM TO TOP Image rolls in from bottom to top. 4 ROLL: TOP/BOTTOM TO CENTER Image rolls in from top and bottom to center. 5 ROLL: CENTER TO TOP/BOT...

61 3 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. This chapter describes how to change each of the available settings. The OSD menu can be accessed through the buttons either on the front control pane...

62 TV Enables you to choose TV or CATV, autoscan for channels, add and delete channels, and edit channel names. CUSTOMIZE Enables you to set the OSD language, set the sleep timer and enable closed captions. Notes: • Press / MENU to exit the menus at any time. • You can control the OSD with either th...

63 3.2 Adjusting Video Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the VIDEO Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the VIDEO Menu. 5 Press to exit ...

64 The Video Mode menu includes the following options. Option Description Video Mode Enables you to customize the video display. The following options are available: Vivid Sets the display for enhanced picture contrast and saturation. Standard Sets the display for normal viewing (default). Soft Sets...

66 3.3 Adjusting Audio Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the AUDIO Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the AUDIO Menu. 5 Press to exit ...

68 3.4 Adjusting PC Settings If a PC is connected, the PC mode menu items become available. The PC Mode menu includes the following options. Press to enter the OSD Main Menu screen. 1 Press or X to enter the PC Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to cha...

70 3.5 Adjusting TV Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the TV Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the TV Menu. 5 Press to exit the TV me...

73 3.6 Adjusting Customize Settings Press to enter the OSD Main Menu screen. 1 Press or X to enter the CUSTOMIZE Menu. 2 Press S / T , CH S / CH T or P S / P T to select an option. 3 Press W or X to change the mode setting. 4 Press to select the changed setting and return to the CUSTOMIZE Menu. 5 Pr...

74 The Customize Settings menu includes the following options: Option Description Language Select from the following language options: • English• Español• Français• 繁體中文 Note:OSD language may vary from region to region. Background Enables you to set the OSD background to be translucent or solid. SCA...

75 4 Using POP The TV features POP (Picture Outside Picture) that enables you to view two sources at the same time. 1 Press to open the double windows, which play the independent content from two different input sources. 2 Press to activate the left window for source selection. Press to select the i...

77 5 Troubleshooting Situation Solution No picture and sound. • Connect the power cord properly. • Check if the power LED is on or not. • Press power on the control panel or remote control. • Press source to cycle through connected video sources. • Press channel up or channel down to switch to other...

79 6 Warranty and Service For complete warranty service information, please refer to the “Warranty and Service Manual” enclosed with your TV.

80 7 Specifications LCD Panel Size 26/32/37 inch TFT Aspect Ratio 16:9 Best Resolution 1366 (horizontal) x 768 (vertical) TV System EU:PAL-B/G D/K ISECAM-L AP:PAL-B/G D/K I Video System AV1 (SCART): RGB/CVBS with Video outAV2: S-Video/CVBSAV3 (SCART): S-Video/CVBS with optional video outAV4: YPbPrE-...

81 7.1 PC Mode Suppor t Timing Pixel Format Hor. Freq. (kHz) Hor. Polarity Ver. Freq. (Hz) Vertical Polarity Standard 1 640*480 31.47 – 60 – VESA 2 640*480 37.861 – 72 – VESA 3 640*480 37.5 – 75 – VESA 4 800*600 35.156 + 56 + VESA 5 800*600 37.879 + 60 + VESA 6 800*600 48.077 + 72 + VESA 7 800*600 4...

82 8 Glossary Broadcast TV: Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV: Community Antenna Television, the original name for cable TV. A television distribution system that uses coaxial cable instead...