HANNspree S_ST55F_UM_US_V01_H - Manuals

4 Engli sh Description of Warning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV. CAUTION This symbol is used to al...

5 English Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat. WARNING To reduce the risk of fire or elect...

6 Engli sh Important Safety Instructions 1.2.3.4. Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturer ’s ins...

7 English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or ...

8 Engli sh Personal safety Installation 1. To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. 2. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the cas...

9 English Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or opera...

10 Engli sh Recycling Information We care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.These devices contain recyclable materials, which can be ...

11 English Trademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and Trademark Acknowledgment Manufactured und...

12 Engli sh 1 Getting Started 1.1 Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • Power cord • Remote control and batteries • User’s manual • Quick start guide • Warranty card...

13 English 1.2 Introducing the TV You can watch NTSC/ATSC broadcast, cable, or digital television channels, and easily connect a VCR, set-top box, or DVD player to the standard CVBS, S-Video, component, and HDMI input ports (location of these ports depends on model). You can also use the TV as a mon...

14 Engli sh 1.3 Control Panel Description Button Function Power Power button. Press to turn the TV on or off. Input source INPUT Press to open the input source list or mark an item on the OSD menu. Menu MENU Press to open the OSD menu. Channel select Press to increase the channel number or move upwa...

15 English 1.4 Input and Output Jacks Description Connector Function Power connector Connect to the included power cord. Cable/ Antenna Connect to an antenna or cable TV. HDMI 1 input Connect to an external device, such as a DVD player, set-top box, or a PC’s DVI/ HDMI port. HDMI 2 input Connect to ...

17 English 1.5 Remote Control Description Icon Function Power Press to turn the TV on or off. Input source INPUT Press to open the input source list. Keypad Use to select a channel directly. Press 0-9 to enter the program numbers (press 1 and 0 for channel 10). Program entry Press this button for en...

18 Engli sh Sleep timer Press repeatedly to set the sleep time (Sleep off, 15, 30, 45, 60, 90, or 120 minutes). A Sleep Info appears on the middle of the screen to show the remaining time. Cancel the timer by pressing the button to sleep off mode. Mute Press to eliminate audio. Press it again or pre...

20 Engli sh 1.6 Inser ting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control. 2 Insert the batteries paying attention to the polarity markings inside the battery compartment. 3 Close the battery compartment cover. PRESS PRESS

21 English Note: • For best results, use the remote control within a proper distance from the front of the TV. Do not exceed an angle of 30 degrees when pointing at TV. • The operational distance may be shortened when the signal sensor is directly exposed to strong light. • Aim the transmitter on th...

22 Engli sh 2 Setting up your TV 2.1 Basic Connections 2.1.1 Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Ante...

23 English 2.2 Connecting Exter nal Devices Connect external devices such as VCRs, set-top box, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the TV. 2.2.1 Connecting Exter nal Ear phones Note: • External speakers or headphones are not incl...

24 Engli sh 2.2.2 Connecting to AV Devices HDMI 4 or or or A B HDMI IN AUDIO VIDEO P R P B R L Y Y L R HDMI P R P B C S-VIDEO R L VIDEO S-VIDEO 1 R-AUDIO-L VIDEO 1 2 3 Audio Cable (Optional) Video Cable (Optional) Audio/ Video Cable (Optional) HDMI Cable (Optional) VCRSTBDVD Game Console

26 Engli sh 2.2.4 Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 Connect the VGA port of the TV to the VGA output of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC. 2.2.5 Conn...

27 English 2.2.6 Connecting HDMI HDMI (High Definition Multimedia Interface) assures that the best video signal is always sent from source to the TV.Refer to the following illustration to connect an HDMI device to the TV. 2.2.7 Connecting USB Connect the USB flash drive to the TV using the USB port ...

28 Engli sh 2.3 Using the TV 2.3.1 Tur ning the TV On and Off 1 Press on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on. 2 Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switch...

29 English 2.3.5 Adjusting the Volume 1 Press VOL+ on the control panel or on the remote control to increase the volume. 2 Press VOL- on the control panel or on the remote control to decrease the volume. 3 Press to eliminate sounds, and press again or press the volume buttons to restore the original...

30 Engli sh 3 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed through the buttons either on the control panel or the remote control. Before going to details of each OSD item,...

31 English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press / on the control panel or / arrow keys on the remote control to scroll through the menus. Press INPUT on the control panel or OK key on the remote control to select an item and then press...

32 Engli sh 3.3 Adjusting Audio Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Audio menu. 3 Press / OK on the remote control or INPUT on the control panel to enter the Audio menu. 4 Press / on the remote control...

33 English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Channel menu. 3 Press / OK on the remote control or INPUT on the control panel to enter the Channel menu. 4 Press / on the remote co...

35 English 3.6 Adjusting Setup Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Setup menu. 3 Press / OK on the remote control or INPUT on the control panel to enter the Setup menu. 4 Press / on the remote control ...

36 Engli sh 4 Troubleshooting Situation Solution No picture and sound. • Connect the power cord properly. • Check if the power LED is on or not. • Press on the control panel or remote control. • Press INPUT to cycle through connected video sources. • Press channel up or channel down to switch to oth...

37 English 5 Specifications LCD Panel Size 55 inch TFT Screen Format 16:9 Panel Resolution 1920 (H) x 1080 (V) Refresh Rate 120 Hz TV System ATV: NTSC DTV: ATSC Video System AV (CVBS) x2 S-Video x2 HDMI: HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 HDTV: (YPbPr) x2 PC (VGA) Photo System USB (JPEG) Audio System...

38 Engli sh PC Mode Support Timing Video Mode Support Timing Mode Resolution(active dot) HorizontalFrequency (KHz) VerticalFrequency (Hz) Nominal Pixel Clock (MHz) VGA DVI to HDMI VGA 640x480@60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37.879 60.317 40.000 V V XGA 1024x768@60Hz 48.363 60.004 65....

39 English 6 Ap pendix: Remote Control Guide 6.1 Introduction The electronic equipment type switch buttons are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV. The remote control keypad...

40 Engli sh 6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” then pressing RETURN does affect the “02” already input. 6.1.3 Searching Codes If the desired electronic...

41 English 6.1.4 Setting Volume Lock Operating procedures are as follows: 1. Press the corresponding electronic equipment button. The indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the setting mode has been entered. ...

42 Engli sh perform this unlock operation, while those electronic equipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited. 4. During the setting process, releasing the electronic equipment button exits the setting mode immediately w...

45 English 6.3 Component Program Codes Setup Code for VCR’s ABC 2102 Admiral 2012, 2022 Aiko 2025 Aiwa 2005, 2027 Alienware 2102 America Action 2025 American High 2004 Amoisonic 2027 Anam 2020, 2005, 2024, 2025 Anam National 2020 Asha 2024 Audiovox 2005, 2025 Beaumark 2024 Bell & Howell 2017 Bro...

52 Engli sh 7 Setting the TV on the Wall Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3 Press the stand locks on both sides...