HANNspree LT16-26U1-000 - Manuals

4 DOC Compliance Notice 1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B. CE Conformity Statemen...

5 Description of Warning Symbols Before You Proceed 1. Read all Safety Notices and instructions in this User ’s Manual carefully before either plugging in or turning the TV on. 2. Keep this User ’s Manual in a safe place for future reference. Keep the box and packaging in case the TV needs to be shi...

6 Safety Notices Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system. You may, however, use an antenna indoors if it is placed in a location free from interference. Location Avoid...

7 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with manufacturer ’s instructions....

9 Notes: • The LCD TV is for entertainment use only and visual display tasks are excluded. • This device uses a VGA connector to connect to a PC. To reduce the influence of mains frequency on the source signal, use a VGA monitor cable with ferrite shield. 14 Refer all servicing to qualified service ...

11 Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating yo...

12 Copyright © Copyright 2005 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspre...

14 1 Getting Started 1.1 Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV • User’s manual • Quick start guide • Warranty and service manual • Power cord • Remote control and batt...

15 1.2 Introducing the TV You can watch NTSC broadcast or cable television channels, and easily connect a VCR, STB or DVD player to the standard CVBS and S-Video input ports located at the rear and/or side of the unit. You can also use the TV as a monitor for your PC by connecting it through the D-s...

21 TV Press this button to select TV source mode. Press this button again to enter DTV mode (available only for selected models). Source Press this button to display the AV source list on the screen. OK Press this button to execute the selection or setting and return to the last menu when using on s...

23 1.2.5 Inser ting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Replace the battery compartment cover (C). UM-4(AAA) UM-4(AAA) UM-4(AAA)

25 2 Setting up your TV 2.1 Basic Connections The following sections provide users with some basic instructions to use the TV. Please read them carefully before you start utilizing the functions. 2.1.1 Connecting the Power Cord and Tur ning On 1 Connect the power cord to AC IN input jack on the rear...

27 2.2 Connecting Exter nal Devices Connect external devices such as VCRs, STBs, or DVD players to the TV using the AV1, AV2, AV3, AV4, and AV5 ports on the back or side of the TV. 2.2.1 Connecting Exter nal Ear phones External earphones may be used to listen to the TV rather than using the built-in...

28 2.2.2 Connecting an Amplifier Using Analog Audio Connect an external amplifier of speakers to the line out port to provide better sound quality. Refer to the following illustration. R L SUBWOOFER IN Amplifier and speakers Audio cable Cables and connectors are color-coded (red, white). Subwoofer w...

29 2.2.3 Connecting an Amplifier Using Digital Audio (Digital output is available for built-in DTV models only.) Use the optical digital out connector to connect an audio decoder or audio/video processor when using a Digital TV (ATSC) receiver. Refer to the following illustration to connect optical ...

30 2.2.4 Connecting a VCR/STB/DVD Player Using Component Video The illustration presented here shows how to connect your TV to a VCR / STB / DVD player using the AV4/AV5 component video ports. Actual connections may vary according to the make and model of your device. Y P B P R R L VCR DVD STB Video...

32 2.2.6 Connecting a VCR/STB/DVD Player Using Composite Video The illustration presented here shows how to connect your TV to a VCR / STB / DVD player using the AV1 composite video port. Actual connections may vary according to the make and model of your device. R VIDEO L Cables and connectors are ...

37 2.3 Inser ting a Memor y Card 1 Insert the memory card(s) into the appropriate card reader slot(s) on the control panel of the TV as shown. 2 Push the card(s) gently until they stop. Make sure the card(s) are inserted in the correct way. 3 When inserted, the memory card(s) will protrude as shown....

43 4 The E-CARD main screen appears. You can choose to view photos, listen to music, watch videos, or look at the contents of the memory card. E-CARD main screen P H O TO M U S I C V I D E O F I L E SELECT ONE AND ENTER: E-CARD main screen

44 2.5.1 Remote Control Keys in E-CARD Mode The following table lists the remote control buttons used to operate the E- CARD feature. Button Description Function Cursor up / down / left / right Press these buttons to navigate the E-CARD menus.In Photo mode, use these buttons to pan a picture when zo...

46 2.5.2 Viewing Photos 1 When the E-CARD main screen appears, use the W / X button on the remote control to select PHOTO. 2 Press to display the thumbnails of images on the memory card. 3 Use the S / T / W / X button to select a thumbnail image. 4 Press to expand the selected thumbnail to full scre...

48 Viewing a Slide Show The E-CARD function has a slide show feature that enables you to view all the images by order. 1 Press on the remote control to start the slide show. The files are viewed sequentially, and files in your music library are also played in sequence. 2 Press again to stop the slid...

49 Transition Table Transition Description 1 FULL SCREEN Image appears full screen. 2 ROLL: TOP TO BOTTOM Image rolls in from top to bottom. 3 ROLL: BOTTOM TO TOP Image rolls in from bottom to top. 4 ROLL: TOP/BOTTOM TO CENTER Image rolls in from top and bottom to center. 5 ROLL: CENTER TO TOP/BOTTO...

51 2.5.3 Listening to Music 1 When the E-CARD main screen appears, use the W / X button on the remote control to select MUSIC. 2 Press . A screen appears displaying a list of the music stored on your memory card. 3 Use the S / T / W / X button to select a music file. The selected file starts playing...

53 2.5.4 Watching Videos 1 When the E-CARD main screen appears, use the W / X button on the remote control to select VIDEO. 2 Press . A screen appears displaying thumbnails of the videos on your memory card. 3 Use the S / T / W / X button on the remote control to select a video file. 4 Press . The s...

57 2.6.2 Searching for Digital Channels Before you start viewing the digital TV programs, you must perform Auto Search to scan for all available ATSC and cable channels on DTV source signals. Press to enter the OSD Main Menu screen. 1 Press or the button to enter the TV Menu. 2 Press the or CH S / C...

58 3 Press to start searching for all the available channels. A banner appears on the screen showing the number of available channels scanned. 4 After searching all the channels, the last available channel scanned is displayed on the screen. The Channel Banner appears showing information of the curr...

59 Channel Banner The Channel Banner located at the bottom of the screen provides viewers with basic information of the chosen channel and the currently broadcast program. Press in normal viewing mode to display the Channel Banner. No. Item Description 1 Up/Down arrows Appear when there is more than...

62 2.6.3 Digital Customize Settings Press to enter the OSD Main Menu screen. 1 Press or to enter the CUSTOMIZE Menu. 2 Press or CH S / CH T button to select an option. 3 Press or to change the mode setting. 4 Press to select the changed setting and return to the CUSTOMIZE Menu. 5 Press to exit the C...

63 The Customize Mode menu includes the following options. Option Description Menu Language Select from the following language options:• English • Español • Français Note:OSD language may vary from region to region. Menu Background Enables you to set the OSD background to be transparent or solid. Sl...

67 Using the Remote Control in Navigator Button Description Press to tune to selected channels. Press to toggle between Navigator and the normal viewing mode. Press to change the soundtrack. Press to turn the closed caption on and off. Press to display the Program Info window. Press to shift focus u...

68 Viewing Program Information Press to view program information for the selected program. A window pops up to display a brief introduction of the chosen program and its broadcast schedule. • If the information exceeds one page, press again to go to the next page of the Program Information window. I...

3 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. This chapter describes how to change each of the available settings. The OSD menu can be accessed through the buttons either on the front control panel o...

71 TV Enables you to choose TV or CATV, autoscan for channels, add and delete channels, and edit channel names. CUSTOMIZE Enables you to set the OSD language, set the sleep timer and enable closed captions. PARENTAL Enables you to set parental controls to prevent unauthorized access to certain TV co...

72 3.2 Adjusting Video Settings Press to enter the OSD Main Menu screen. 1 Press or to enter the VIDEO Menu. 2 Press or CH S / CH T button to select an option. 3 Press or to change the mode setting. 4 Press to select the changed setting and return to the VIDEO Menu. 5 Press to exit the VIDEO menu. M...

75 3.3 Adjusting Audio Settings Press to enter the OSD Main Menu screen. 1 Press or to enter the AUDIO Menu. 2 Press or CH S / CH T button to select an option. 3 Press or button to change the mode setting. 4 Press to select the changed setting and return to the AUDIO Menu. 5 Press to exit the AUDIO ...

77 3.4 Adjusting PC Settings If a PC is connected, the PC mode menu items become available.The PC Mode menu includes the following options. Press to enter the OSD Main Menu screen. 1 Press or to enter the PC Menu. 2 Press or CH S / CH T button to select an option. 3 Press or button to change the mod...

79 3.5 Adjusting TV Settings Press to enter the OSD Main Menu screen. 1 Press or to enter the TV Menu. 2 Press or CH S / CH T button to select an option. 3 Press or to change the mode setting. 4 Press to select the changed setting and return to the TV Menu. 5 Press to exit the TV menu. Menu TV Selec...

81 3.6 Making Customize Settings Press to enter the OSD Main Menu screen. 1 Press or to enter the CUSTOMIZE Menu. 2 Press or CH S / CH T button to select an option. 3 Press or to change the mode setting. 4 Press to select the changed setting and return to the CUSTOMIZE Menu. 5 Press to exit the CUST...

82 The Customize Mode menu includes the following options. Option Description Menu Language Select from the following language options: • English • Español • Français • 繁體中文 Note:OSD language may vary from region to region. Menu Background Enables you to set the OSD background to be transparent or s...

83 3.7 Setting Parental Controls (Available in the US and Canada only) Press to enter the OSD Main Menu screen. 1 Press or to enter the PARENTAL Menu. You are prompted for the password: 2 Enter the password using the numeric keys on the remote control. The default password is 0000. 3 Press to confir...

88 Note:The French and English ratings are for the US and Canada only. Change Password Enables you to change the password. Enter the old password followed by the new password to change it. Preset Erases all customized PARENTAL settings and return all values to factory defaults. Option Description PA...

89 Refer to the following table for TV rating information: ; :The content rating can be set, but this rating is not normally broadcast by TV stations. : :The content rating can be set. TV RATINGS FV Fantasy Violence V Violence S Sexual Situations L Adult Language D Sexually Suggestive Dialog TV-Y (A...

90 Refer to the following table for movie rating information. More information about the rating systems can be found by visiting these websites: http://www.mpaa.org http://www.tvguidelines.org MPAA RATINGS G GENERAL AUDIENCES Suitable for all ages. PG PARENTAL GUIDANCE SUGGESTED Some material may no...

91 4 Troubleshooting S i t u a t i o n S o l u t i o n No picture and sound. • Connect the power cord properly. • Check if the power LED is on or not. • Press power on the control panel or remote control. • Press source to cycle through connected video sources. • Press channel up or channel down to ...

93 5 Warranty and Service For complete warranty service information, please refer to the “Warranty and Service Manual” enclosed with your TV.

94 6 Specifications LCD Panel Size 26/32/37 inch TFT Aspect Ratio 16:9 Best Resolution 1366 (horizontal) x 768 (vertical) TV System Built-In analog and digital (for US and Canada Only) TV Tuner Video System AV1: Composite Video (CVBS)AV2: Composite Video (CVBS + S-Video)AV3: Composite Video (S-Video...

95 6.1 PC Mode Suppor t Timing Pixel Format Hor. Freq. (kHz) Hor. Polarity Ver. Freq. (Hz) Vertical Polarity Standard 1 640*480 31.47 – 60 – VESA 2 640*480 37.861 – 72 – VESA 3 640*480 37.5 – 75 – VESA 4 640*480 NA NA 85 NA VESA 5 800*600 35.156 + 56 + VESA 6 800*600 37.879 + 60 + VESA 7 800*600 48....

96 7 Glossary Broadcast TV: Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV: Community Antenna Television, the original name for cable TV. A television distribution system that uses coaxial cable instead...