HANNspree LT13-23A1 - Manuals

Page 2 - Table of Contents; Connecting to a VCR, VCD or DVD Player using

Table of Contents 1 1. Warranty and Service .................................................... 42. Preface ......................................................................... 53. Description of Warning Symbols ..................................... 64. Safety Notices ............................

Page 5 - Warranty and Service

4 The instructions on this manual are for the model(s) listed on the front cover. Before you start reading, check your product number by looking at the rear of your TV. Thank you for purchasing our Liquid Crystal Display Television (LCD TV). With this product, you will be able to enjoy superior audi...

Page 6 - Copyright; • BBE and BBE symbol are registered trademarks of BBE Sound,; Preface

5 This manual is designed to assist users in setting up and using the LCD TV. Information in this document has been carefully checked for accu-racy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Copyright © Co...

Page 7 - Electric Power Notice; Warning; Description of Warning Symbols

6 Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into consideration during the design and production of this product, electric shock or fire can result when the product is misused. To prevent potential danger, fol...

Page 8 - Power Supply Safety Notes; To avoid electric shocks, do not use an extended power cord or; Installation Safety Notes; Antenna; Safety Notices

7 Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is d...

Page 10 - Optimal Viewing Distance

9 Optimal Viewing Distance 250 cm POWE R VOLU ME SOURC E CHAN NEL

Page 11 - Important Safety Instructions; Do not use this apparatus near water.

10 Important Safety Instructions Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. Do not in...

Page 13 - Personal Safety

12 Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power compo-nents are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small...

Page 14 - Installation

13 Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans-mission lines to avoi...

Page 16 - FCC Compliance Statement; to which the receiver is connected.; : You are cautioned that changes or modifications not; Regulatory Information

15 FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is sub-ject to the following two conditions: (1) This device may not cause harm-ful interference, and (2) this device must accept any interference received, including interference that may cause undesired ope...

Page 18 - Introducing the TV

17 Thank you for purchasing this Liquid Crystal Display TV. Your TV is designed to be safe, versatile, and easy to use. Its sturdy design makes it a decorative addition to your living room. You can watch standard NTSC broadcast or cable television channels, and easily connect a VCR, VCD, or DVD play...

Page 19 - Features

18 Features • 23-inch color TFT LCD TV • Safe, sturdy construction• Built-in dual TV tuner• Audio/video support: – Stereo audio inputs– Composite video inputs– Component video input– S-Video inputs– 3.5 mm stereo earphone output– DVI input • On-screen display (OSD) menu system• Multi-channel Televis...

Page 20 - Checking Package Contents

19 Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged. TV User ’s Manual Quick Start Guide Warranty and Service Manual Cables Power Cord Power Adapter POWER VOLUME SOURCE CHANNEL User's Manual Quick Start Guide Warranty and s...

Page 21 - Front View Controls; Description; Getting to Know Your TV

20 Front View Controls Description Function 1 Power button and LED Turns the TV on and off. The green LED indicates power on. In PC mode, amber light indicates sleep status. 2 Adjust volume Press the S button to increase the volume. Press the T button to decrease the volume. These buttons are also u...

Page 23 - Front View Por ts

22 Front View Por ts Description Function 1 AV4 Use the AV4 input to connect an external device, such as a VCR or a VCD/DVD player. Audio Input (L, R): white and red audio cables. Video Input (S-Video or Video): yellow (video) or S-Video cable. 2 Earphone line out Connects to earphone . POWER VOLUME...

Page 24 - Rear Panel Input and Output Por ts

23 Rear Panel Input and Output Por ts Description Function 1 DVI Connects to a PC’s DVI port. 2 Line in Connects to a PC’s line/audio out port. 3 Line out Connects to external amplifier or speakers. DVI LINE IN R L R L R L V S Y P R P B LINE OUT AV 1 AV 2 R L V ANT DC-IN AV 3 1 2 3 4 5 6 7 8

Page 26 - Getting Started

25 Making Connections Open the back cover as shown in the following illustration to get access to the input and output ports. 1. Rotate the cover in the direction of the arrow. 2. Pull the cover out. Getting Started 9

Page 27 - Connecting to an Antenna or Cable TV

26 Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CATV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the Antenna or CATV socket. Note:If you cannot receive channels after connecting...

Page 28 - Connecting to AV Devices; VCR

27 Connecting to AV Devices Connect external devices such as VCD/DVD players or VCRs to the TV using the AV1, AV2, AV3, and AV4 ports on the back or front of the TV. Connecting to a VCR, VCD or DVD Player using component video The illustration presented here shows how to connect your TV to a VCR, VC...

Page 29 - Connecting to a Video Camera using S-Video; Audio cable

28 Connecting to a Video Camera using S-Video The following illustration shows how to connect the TV to a camcorder using the AV2 S-video port. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder for more detailed instruct...

Page 31 - to listen to the TV instead of using the built-in; earphone; to the; earphone; line out port as; Note: Earphone is not included with the product.; Earphone; port

30 Connecting Ear phone You can use earphone to listen to the TV instead of using the built-in speakers. Connect earphone to the earphone line out port as illustrated. Note: Earphone is not included with the product. POWER VOLUME SOURCE CHANNEL Earphone Earphone port

Page 32 - Connecting an Amplifier or Speakers; Line out

31 Connecting an Amplifier or Speakers Connect an external amplifier or speakers to the line out port to provide better sound quality. Refer to the following illustration. DVI LINE IN R L R L R L V S Y P R P B LINE OUT AV 1 AV 2 R L V ANT DC-IN AV 3 R L Line out Amplifier and speakers

Page 33 - Connecting to a PC; PC

32 Connecting to a PC Connect the TV to your PC to use it as the monitor using the DVI port as shown. Connect the DVI port of the TV to the DVI output of the PC. Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC. DVI LINE IN R L R L R L V S Y P R P B L...

Page 34 - Connecting the Power Adapter; Connect the power cord to the power adapter as illustrated.; Power cord

33 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN on the rear panel of the TV. 3 Plug the three-pronged plug at the other end of the power cord into a power outlet. DVI LINE IN R L R L R L V S Y P R P B LIN...

Page 35 - Using the Remote Control; Using the TV

34 Using the Remote Control For best result, use the remote control within a distance of 6 meters (20 feet) from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration. 4m 30 4m 6m 30 POWE R VOLU ME SOUR CE CH...

Page 36 - Tur ning the TV On and Off; Selecting Channels; CH; Power button and LED

35 Tur ning the TV On and Off 1 Press the POWER button on the remote control or on the TV control panel. The power LED indicator on the front of the TV changes from red to green, indicating that the power is on. 2 Press the POWER button again. The power LED changes from green to red, indicating that...

Page 37 - Adjusting the Volume; VOL; Switching Source Signals; SOURCE; button repeatedly to

36 Adjusting the Volume 1 Press the VOL S button to increase the volume. 2 Press the VOL T button to decrease the volume. 3 Press the MUTE button. The word “MUTE” appears on the bottom right corner of the screen and sound is turned off. 4 Press the MUTE button again to restore the original volume. S...

Page 38 - Using PIP and POP; Refer to “PIP Operation Mode” on page 76 for information on which

37 Using PIP and POP The TV features Picture-in-Picture (PIP) and Picture-outside-Picture(POP), enabling you to view two sources at the same time. Follow these instructions. 1 Turn on the TV and select a source signal. 2 Press the PIP button on the remote control.A picture-in-picture window appears ...

Page 40 - Press the; button to open and close the OSD menu at any time.; CLOSE; option in the menu to return to the previous; Button Descriptions; OSD Setting Menus; Settings

39 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV's setting. This chapter describes how to change each of the available settings. The OSD menu can be accessed through either the front control panel or the remote control. The following sections explain ho...

Page 41 - Picture Settings; PC picture mode and TV picture mode have different menu items PC

40 Picture Settings Note: • You can control the OSD with either the remote control or the front panel control. • PC picture mode and TV picture mode have different menu items; PC picture mode includes a Backlight adjustment. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to sel...

Page 42 - Brightness

41 Brightness 1 Press the CHANNEL S or T button to select BRIGHTNESS. The slider bar shows the current setting. 2 Press the VOLUME S button to increase the brightness. 3 Press the VOLUME T button to decrease the brightness. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRIG...

Page 43 - Contrast

42 Contrast 1 Press the CHANNEL S or T button to select CONTRAST . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the contrast. 3 Press the VOLUME T button to decrease the contrast. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRIGHTNESS ...

Page 45 - Hue

44 Hue 1 Press the CHANNEL S or T button to select HUE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the hue. 3 Press the VOLUME T button to decrease the hue. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRIGHTNESS 50 CONTRAST 50 BLACK...

Page 46 - Saturation

45 Saturation 1 Press the CHANNEL S or T button to select SATURATION . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the saturation. 3 Press the VOLUME T button to decrease the saturation. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRI...

Page 47 - Sharpness

46 Sharpness 1 Press the CHANNEL S or T button to select SHARPNESS . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the sharpness. 3 Press the VOLUME T button to decrease the sharpness. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRIGHTN...

Page 48 - Black Level

47 Black Level 1 Press the CHANNEL S or T button to select BLACK LEVEL . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the black level. 3 Press the VOLUME T button to decrease the black level. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF...

Page 49 - – for standard color; WARM Color; The new setting is confirmed

48 Color Temperature 1 Press the CHANNEL S or T button to select COLOR TEMP . 2 Press the VOLUME S or T button to change the color temperature. The current setting is shown in brackets. The following options are available: • STD Color – for standard color settings. • WARM Color – for color set- ting...

Page 50 - Preset; Press the CHANNEL

49 Preset 1 Press the CHANNEL S or T button to select PRESET . 2 Press the VOLUME S or T button. “ON” appears in the brackets. All picture settings are returned to the factory-set default values. PICTURE RETURN MENU : CLOSE : SELECT : ADJUST COLOR TEMP STD PRESET OFF BRIGHTNESS 50 CONTRAST 50 HUE 50...

Page 51 - Audio Settings

50 Audio Settings Note: You can control the OSD with either the remote control or the front panel control. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select AUDIO. 2 Press VOLUME S or T to enter the AUDIO Menu. S-video R L Video MENU MUTE POWER VOLUME SOURCE CHANNEL MAIN...

Page 52 - Treble

51 Treble 1 Press the CHANNEL S or T button to select TREBLE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the treble. 3 Press the VOLUME T button to decrease the treble. AUDIO MENU : CLOSE : SELECT : ADJUST PRESET OFF RETURN TREBLE 108 BASS 108 EARPHONE 20 BALA...

Page 53 - Bass

52 Bass 1 Press the CHANNEL S or T button to select BASS . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the bass. 3 Press the VOLUME T button to decrease the bass. AUDIO MENU : CLOSE : SELECT : ADJUST PRESET OFF RETURN TREBLE 108 BASS 108 EARPHONE 20 BALANCE ONOF...

Page 54 - Balance

53 Balance BBE, TruSurround, and EALA 1 Press the CHANNEL S or T button to select BALANCE . The slider bar shows the current setting. 2 Press the VOLUME S button to shift the balance to the right speaker. 3 Press the T button to shift the balance to the left speaker. 1 Press the CHANNEL S or T butto...

Page 57 - TV Settings; The TV OSD menu is not available if the input source is not TV.

56 TV Settings Notes: • Operate the OSD with either the remote control or the front panel con- trol. • The TV OSD menu is not available if the input source is not TV. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select TV. 2 Press VOLUME S or T to enter the TV Menu. S-vide...

Page 58 - The default TV setting is “CATV”.

57 TV/CATV 1 Press the CHANNEL S or T button to select TV/CATV . The current setting is shown in brackets. 2 Press the VOLUME S button to select CATV in order to receive cable TV signals. 3 Press the VOLUME T button to select TV in order to receive broadcast TV signals. TV MENU : CLOSE : SELECT : AD...

Page 59 - MTS; • MAIN – select the main; If no secondary language is avail-

58 MTS 1 Press the CHANNEL S or T button to select MTS . The current setting is shown in brackets. 2 Press the VOLUME S or T button to select from the various MTS options: • MAIN – select the main audio signal. • SAP – select the secondary audio signal • DUAL – enable both pri- mary and secondary au...

Page 60 - Auto Scan

59 Auto Scan 1 Press the CHANNEL S or T button to select AUTO SCAN . The current setting is shown in brackets. 2 Press the VOLUME S button to enable auto scanning. “ON” is displayed in brackets and the TV starts scanning automatically for TV channels. TV MENU : CLOSE : SELECT : ADJUST TVMAIN OFF ADD...

Page 62 - Favorite Channel

61 Favorite Channel 1 Press the CHANNEL S or T button to select FAV.CHANNEL . 2 Press the VOLUME S or T button to enter the FAV.CHANNEL menu. 3 Press the CHANNEL S or T button to select a favorite channel number 1 ~ 4 . 4 Press the VOLUME S or T button to choose a channel to assign to the favorite c...

Page 63 - PC Settings; The PC OSD menu is not available if the input source is not PC.

62 PC Settings Notes: • Operate the OSD with either the remote control or the front panel con- trol. • The PC OSD menu is not available if the input source is not PC. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select TV. 2 Press VOLUME S or T to enter the TV Menu. S-vide...

Page 64 - Phase; CHANNEL

63 Phase 1 Press the CHANNEL S or T button to select PHASE . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the phase. 3 Press the VOLUME T button to decrease the phase. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V-POSITION 15 OFF AUTO ADJ . GRAPHIC...

Page 65 - Clock

64 Clock 1 Press the CHANNEL S or T button to select CLOCK . The slider bar shows the current setting. 2 Press the VOLUME S button to increase the clock. 3 Press the VOLUME T button to decrease the clock. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V-POSITION 15 OFF AUTO ADJ . GRAPHIC...

Page 66 - TEXT

65 Auto Adjustment DOS Mode 1 Press the CHANNEL S or T button to select AUTO ADJUSTMENT . 2 Press the VOLUME S button to enable auto adjustment. The display is automatically configured for the attached computer ’s display properties. 1 Press the CHANNEL S or T button to select DOS MODE . The current...

Page 67 - Horizontal Position

66 Horizontal Position 1 Press the CHANNEL S or T button to select H POSITION . The slider bar shows the current setting. 2 Press the VOLUME S button to move the display to the right. 3 Press the VOLUME T button to move the display to the left. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK...

Page 68 - Vertical Position

67 Vertical Position 1 Press the CHANNEL S or T button to select V POSITION . The slider bar shows the current setting. 2 Press the VOLUME S button to move the display upward. 3 Press the VOLUME T button to move the display downward. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V-POSIT...

Page 69 - Miscellaneous Settings; Operate the OSD with either the remote control or the front panel

68 Miscellaneous Settings Note: Operate the OSD with either the remote control or the front panel control. Press MENU to enter the OSD Main Menu screen. 1 Press CHANNEL S or T to select MISCELLANEOUS. 2 Press VOLUME S or T to enter the MISCELLANEOUS Menu. S-video R L Video MENU MUTE POWER VOLUME SOU...

Page 71 - Sleeper; The sleep timer turns the TV off automatically after a set time.; SLEEP

70 Sleeper The sleep timer turns the TV off automatically after a set time. 1 Press the CHANNEL S or T button to select SLEEPER . The current setting is shown in brackets. 2 Press the VOLUME S or T button to select a sleep timer value from the following: OFF, 30, 60, 90, or 120 minutes You can also ...

Page 72 - Time; This setting allows you to set the system time.

71 Time This setting allows you to set the system time. 1 Press the CHANNEL S or T button to select TIME . 2 Press the VOLUME S button to change the time. 3 Press the CHANNEL S or T button to select HOUR. Press the VOLUME S or T button to increase or decrease the hour. 4 Press the CHANNEL S or T but...

Page 73 - Taking Care of Your TV

72 Turn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish. Wipe the shell with a dry soft cloth and us...

Page 74 - Troubleshooting

73 Situation Solution No picture and sound. • Connect the power cord properly. • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the CHANNEL UP or CHANNEL DOWN button to switch to other TV stations. • Check th...

Page 76 - Specifications

75 LT13-23A1 LCD Panel Size 23-inch TFT Aspect Ratio 15:9 Panel Best Resolution 1280 (horizontal) x 768 (vertical) TV System NTSC Video System AV1: Component Video (RCA jack, YPbPr)AV2: Composite Video (RCA jack; yellow + S-Video)AV3: Composite Video (RCA jack)AV4: Composite Video (RCA jack; yellow ...

Page 77 - Main Sou rce

76 PIP Operation Mode The following table shows which main sources are compatible with PIP and POP sources. Main Sou rce PIP So urce POP Source AV1 (YPbPr or YCbCr) AV2 — AV3 — AV4 — TV2 — AV2 (S or CVBS) AV2 AV2 AV3 AV3 AV4 AV4 TV2 TV2 AV3(CVBS) AV2 AV2 AV3 AV3 AV4 AV4 TV2 TV2 AV4 (S or CVBS) “Fron...

Page 78 - Computer Compatibility Char t; Resolution

77 Computer Compatibility Char t The following table shows resolution and frequency values supported by the TV. Resolution Frequency Remarks 640 X 400 70 Hz — 640 X 480 60 Hz — 67 Hz Mac 72 Hz — 75 Hz — 800 X 600 56 Hz — 60 Hz — 72 Hz — 75 Hz — 832 X 624 75 Hz Mac 1024 X 768 60 Hz — 70 Hz — 75 Hz — ...

Page 79 - Glossary

78 Aspect Ratio The ratio of width to height of a film, image or display screen. BBE A proprietary audio enhancement technology. BBE compensates for distortion common to loudspeakers. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels...

Page 80 - MEMO