HANNspree LT0B-15U1-000 - Manuals

6 3 Safety Notices Electric Power Notice Electric power may cause personal injury and mechanical damage if misused. Although safety has been taken into consideration during the design and production of this TV, electric shock or fire can result if the TV is misused. To prevent potential danger, read...

7 Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system. You may, however, use an antenna indoors if it is placed in a location free from interference. Location Avoid prolonged expo...

8 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with manufacturer ’s instructions....

10 Personal Safety To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the TV in any way. Do not place or...

11 Installation Do not place the TV in locations where there is excessive steam or dust. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet, or in a sealed cabinet. Install the outdoor antenna (not included) away from power transmission lines to avoid possible danger. Unplug t...

13 4 Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating ...

14 Copyright © Copyright 2004 Hannspree California Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization o...

15 5 Introducing the TV Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design makes it a fun addition to any room. You can watch broadcast or cable television channels, and easily connect a VCR, VCD, DVD player or a game device to the standa...

16 6 Checking Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • TV• User’s manual• Quick start guide• Warranty and service manual• Power cord• Power adapter• 4-IN-1 A/V cable• Remote...

17 7 Getting Started Control Panel Description Icon Function Power Turns the TV on and off. Power LED Indicates power status. Mute (Auto) In TV/AV mode, press this button to mute the audio. Automatically adjusts the screen parameter in PC mode. Source SOURCE/S/ Selects the input source to be display...

18 Input and Output Jacks Description Connector Function AV1 (R-AUDIO/ L-AUDIO/VIDEO) (Selected models only) Connects to a right audio (red) or left audio (white) cable, or video (yellow) cable. AV2 (AV, AV IN) Use the included 4-IN-1 A/V cable to connect external devices, such as a VCR, VCD, DVD pl...

19 Remote Control Description Icon Function Menu Press this button to activate the OSD menu system and to adjust various settings and personal preferences. Arrow S / T / W / X / < / > Press S / T / W and X to scroll through the on-screen display menus. Favorite channels can be selected using t...

21 Inser ting the Remote Control Batter y/Batteries Lithium battery/batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 Slide the battery/batteries, with the positive (+) side facing up, underneath the shorter set of metal contacts (B). 3 Press the battery/batteri...

22 AAA battery/batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 Insert the battery/ batteries paying attention to the polarity markings inside the battery compartment (B). 3 Replace the battery compartment cover (C). Note Your remote control may have either AAA...

24 8 Making Connections Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. Note If you cannot receive ch...

25 Connecting to AV Devices Connect external devices such as a VCR, VCD or DVD player, or video game console to the TV using the supplied 4-IN-1 A/V cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player. Actual connections m...

26 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for mor...

27 Connecting to a Video Game Console The instructions presented here are a general guide to connecting the TV to a game console using the RCA Jacks (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device. ...

28 Connecting Exter nal Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers to the speaker line out port or headphones to the headphone port as illustrated. Notes • External speakers or headphones a...

29 Connecting to a PC You can connect the TV to a PC and use it as an external monitor. Connect the TV’s VGA/PC-IN port to the PC’s VGA port. Connect the TV’s line in port to the PC’s line out port to listen to the PC’s audio output on the TV’s speakers. Refer to the following illustration. Note You...

30 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet. DC-IN input jack Power cord ...

31 9 Using the TV Using the Remote Control For best results, use the remote control within a distance of 16 feet (5 meters) from the front of the TV. Do not exceed an angle of 30 degrees when pointing at the TV. Notes • The operational distance may be shortened when the signal sensor is directly exp...

32 10 Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings. The OSD can be used with either the remote control or the control panel. Note...

33 Note To exit the OSD menus, press channel up or channel down to select Exit . Then press menu to exit the OSD menus. Also, after you finish setting OSD parameters, follow these instructions to exit the OSD menus. OSD Setting Menu Press menu to enter the OSD menus. The Main Menu appears. PC Bright...

34 Brightness 1 Press menu to enter the OSD menus. 2 Press menu again to enter the Brightness & Contrast menu. 3 Press channel up to increase the brightness. Press channel down to decrease the brightness. 4 Press menu to select Return. 5 Press channel down to exit the Brightness & Contrast m...

35 Contrast 1 Press menu to enter the OSD menus. 2 Press menu again to enter the Brightness & Contrast menu. 3 Press menu to select Contrast. 4 Press channel up to increase the contrast. Press channel down to decrease the contrast. 5 Press menu to select Return. 6 Press channel down to exit the ...

37 Treble 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Audio Setting. 3 Press menu to enter the Audio Setting menu. 4 Press channel up to increase the treble. Press channel down to decrease the treble. 5 Press menu to select Return. 6 Press channel down to exit t...

38 Bass 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Audio Setting. 3 Press menu to enter the Audio Setting menu. 4 Press menu to select Bass. 5 Press channel up to increase the bass. Press channel down to decrease the bass. 6 Press menu to select Return. 7 Press...

39 Balance 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Audio Setting. 3 Press menu to enter the Audio Setting menu. 4 Press menu to select Balance. 5 Press channel up to change the balance to the right speaker. Press channel down to change the balance to the lef...

40 SRS This option enables the 3D Surround Sound feature. 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Audio Setting. 3 Press menu to enter the Audio Setting menu. 4 Press menu to select SRS. 5 Press channel down to turn the SRS on. Press channel up to turn the S...

41 Mute 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Audio Setting. 3 Press menu to enter the Audio Setting menu. 4 Press menu to select Mute. 5 Press channel down to turn the mute on. Press channel up to turn the mute off. 6 Press menu to select Return. 7 Press ...

43 Hue 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Video Setting. 3 Press menu to enter the Video Setting menu. 4 Press channel down to increase the red hue. The image becomes more red. Press channel up to increase the green hue. The image becomes more green. 5 ...

44 Saturation 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Video Setting. 3 Press menu to enter the Video Setting menu. 4 Press menu to select Saturation. 5 Press channel up to increase the saturation. The screen image becomes more vibrant. Press channel down to ...

45 Sharpness 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Video Setting. 3 Press menu to enter the Video Setting menu. 4 Press menu to select Sharpness. 5 Press channel up to increase the sharpness. Press channel down to decrease the sharpness. 6 Press menu to se...

46 Color Temperature 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Video Setting. 3 Press menu to enter the Video Setting menu. 4 Press menu to select Color Temp. The following choices are available. Warm Press channel up or channel down to select Warm. Standard P...

48 TV/CATV 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select TV Setting. 3 Press menu to enter the TV Setting menu. 4 Select one of the following. Receiving Broadcast TV Press channel up or channel down to select TV when using an antenna to receive TV. Receiving Cable...

49 MTS 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select TV Setting. 3 Press menu to enter the TV Setting menu. 4 Press menu to select MTS. The following choices are available. STEREO Press channel up or channel down to select Stereo (default), the default audio signa...

50 Auto Program 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select TV Setting. 3 Press menu to enter the TV Setting menu. 4 Press menu to select Auto Program. 5 Press channel down to select Yes. Channel indicator values range from 2 to 69 (antenna connection) or from 1...

52 Channel Add/Erase After you found a channel using Manual Program, follow the following instruction to add or erase the channel. 1 Press menu to select Add/Erase. 2 Select one of the following option. Add Channel Press channel down to select Add. The channel is added to the channel list. Erase Cha...

54 PC Setting 1 Connect TV to a PC. 2 Press source to select PC. 3 Press menu to enter the OSD menus. 4 Press channel up or channel down to select PC. 5 Press menu to enter the PC menu. PC PC Setting Return Select Menu OK H.PositionV.Position PhaseClockMore Option 5016 0 1688

55 Horizontal Position 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select PC Setting. 3 Press menu to enter the PC Setting menu. 4 Press channel up to move the display to the right. Press channel down to move the display to the left. 5 Press menu to select Return. 6 Pr...

56 Vertical Position 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select PC Setting. 3 Press menu to enter the PC Setting menu. 4 Press menu to select V.Position. 5 Press channel up to move the display up. Press channel down to move the display down. 6 Press menu to sel...

57 Phase 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select PC Setting. 3 Press menu to enter the PC Setting menu. 4 Press menu to select Phase. 5 Press channel up to increase the phase. Press channel down to decrease the phase. 6 Press menu to select Return. 7 Press c...

58 Clock 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select PC Setting. 3 Press menu to enter the PC Setting menu. 4 Press menu to select Clock. 5 Press channel up to increase the clock. Press channel down to decrease the clock. 6 Press menu to select Return. 7 Press c...

61 User The User option enables users to make their own color settings.Press channel up or channel down to select User. The user menu appears.– Press menu to select User R, User G, or User B. – Press channel up or channel down to increase or decrease the selected color temperature. 7 Press menu to s...

62 Miscellaneous Setting Press menu to enter the OSD menus. 1 Press channel up or channel down to select Miscellaneous. 2 Press menu to enter the Miscellaneous menu. PC Return Select Menu OK LanguageSleeper OSD DisplayTime SettingMore Option OFF English ON OFF Miscellaneous

63 Language 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Miscellaneous. 3 Press menu to enter the Miscellaneous menu. 4 Press channel up or channel down to select a language. 5 Press menu to select Return. 6 Press channel down to exit the Miscellaneous menu. PC M...

64 Sleeper The Sleeper turns the TV off automatically after a set period of time. 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Miscellaneous. 3 Press menu to enter the Miscellaneous menu. 4 Press menu to select Sleeper. 5 Press channel up or channel down to selec...

65 OSD Display When set to Off, the OSD display (source data on top left corner of the TV screen) turns off after approximately 5 seconds. When set to On, the OSD does not turn off automatically. 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Miscellaneous. 3 Press...

66 Time Setting This setting allows you to set the TV clock. 1 Press menu to enter the OSD menus. 2 Press channel up or channel down to select Miscellaneous. 3 Press menu to enter the Miscellaneous menu. 4 Press menu to select Time Setting. 5 Press channel up to enter the Time Setting menu. 6 Press ...

68 OSD Background This setting allows you to make the OSD background transparent or opaque. 1 Enter the More Option menu. 2 Press channel down to make the background transparent. Press channel up to make the background opaque. 3 Press menu to select Return. 4 Press channel down to exit the More Opti...

69 C. Caption (Closed Caption) This setting allows you to select closed caption subtitles or text information broadcast with the program 1 . 1 Enter the More Option menu. 2 Press menu to select C.Caption. 3 Press channel up to select CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4, or Off. 4 Press me...

70 Parental The Parental Control Function (V-CHIP) is used to block program viewing based on the ratings sent by the broadcast stations 1 . The United States has two rating systems for viewing contents, TV Parental Guidelines, and movie ratings. The TV Parental Guidelines work in conjunction with th...

78 12 Troubleshooting Situation Solution No picture and sound. • Connect the power cord properly. • Check if the power LED is on or not. • Press power on the control panel or remote control. • Press source to cycle through connected video sources. • Press channel up or channel down to switch to othe...

80 13 Warranty and Service For complete warranty service information, please refer to the “Warranty and Service Manual” enclosed with your TV.

81 14 Specifications PC Mode Support Timing 15-inch LCD TV LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Display Resolution 1024 (horizontal) x 768 (vertical) TV System NTSC Video System VGA input (15 pin D-SUB / PC link cable), S-Video Input and Composite Video Input (through the 4-IN-1 A/V cable) Au...

82 15 Glossary Aspect Ratio: The ratio of width to height of a film, image or display screen. Broadcast TV: Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV: Community Antenna Television, the original nam...