HANNspree K215-10A1 - Manuals

5 Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into consideration during the design and production of this product, electric shock or fire can result when the product is misused. To prevent potential danger, fol...

6 Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is d...

9 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s ins...

11 Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power compo-nents are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small...

12 Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans-mission lines to avoi...

14 FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is sub-ject to the following two conditions: (1) This device may not cause harm-ful interference, and (2) this device must accept any interference received, including interference that may cause undesired ope...

16 Thank you for purchasing this Liquid Crystal Display TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design of the proudct is based on Racer, which makes is a fun addition to any room. You can watch broadcast or cable television channels, and easily connect a VCR, VCD, or ...

17 Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged. TV User ’s Manual Quick Start Guide Warranty and Service Manual Wire Material Package Power Cord Power Adapter 4-IN-1 Cable RCA Jack x 3 HANN spree User's Manual Quick St...

18 Front View Description Function 1 Source Selects the input source to be displayed (TV/CATV, AV, or S-Video). 2 Menu Turns the On-Screen Display (OSD) menus on and off. 3 Adjust volume Press VOL+ to increase the volume. Press VOL– to decreases the volume. 4 Select channel Changes channels. Press C...

19 Input and Output Por ts Description Function 1 DC 12V Connects to the included power adapter. 2 4-IN-1 Connects to VCR/VCD/DVD player CVBS RCA cables or a game device. 3 HEADPHONE Connects to headphones or other audio device. 4 ANT Connects to an antenna or CATV cable television line. DC 12V 4-IN...

20 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CATV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable. NoteIf you cannot receive channels after connecting to an an...

21 Connecting to AV Devices Connect external devices such as a VCR, VCD or DVD player, or video game to the TV using the 4-IN-1 cable. Connecting to a VCR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR and VCD or DVD player. Actual connections may vary accord-ing...

22 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connec-tions may vary according to the make and model of the device. Refer to the user’s manual included with the camcorder or camera for mo...

23 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using the RCA Jacks provided (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device....

24 Connecting Exter nal Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the headphone line out port as illustrated. Notes • External speakers or headphones are not included with...

25 Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV. 3 Insert the three-pronged plug at the other end of the power cord into a power outlet. DC-IN input jack DC 12V 4-IN...

26 Using the Remote Control For best results, use the remote control within a distance of 5 meters from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration. VO L 30 30 5m 3m 3m 10 Using the TV

27 Tur ning the TV On and Off 1 Press the POWER button on the remote control (or control panel). The five LED indica-tors at the top of the TV blink in sequence ( A ) and then blink once in unison ( B ); the power LEDs on the front of the TV changes from dark to green, indicating that the power has ...

28 Selecting Channels Press the CH UP button or CH DOWN button on the control panel to select the channel or enter the specific channel number by pressing the number buttons on the romote control. Switching Source Signals Press SOURCE to select the incoming source signal. The current source setting ...

29 Adjusting the Volume Press the VOL UP button to increase the volume. Press the VOL DOWN button to decrease the volume. The volume level is displayed on the TV. Press MUTE button on the remote control to trun the sound off. Press MUTE on the remote control or press VOL UP/VOL DOWN to trun the soun...

30 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings.The OSD can be used with either the remote control or front control panel. The following sections explain how to adjust sett...

31 Brightness 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Brightness. 3 Press MENU . The brightness slide bar appears. 4 Press the CH UP button to increase the brightness. 5 Press the CH DOWN button to decrease the brightness. 6 Press MENU to confirm the...

32 Contrast 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Contrast. 3 Press MENU . The contrast slide bar appears. 4 Press the CH UP button to increase the contrast. 5 Press the CH DOWN button to decrease the contrast. 6 Press MENU to confirm the setting a...

33 Video Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Video Setting. 2 Press MENU to enter the Video Setting menu. ETO ETO M a i n M e n u V i d e o S e t t i n g E N T E R

34 Hue 1 Press the CH UP button or CH DOWN button to select Hue. 2 Press MENU to enter the Hue menu. 3 Press the CH UP button to increase the hue towards the red spectrum. The image becomes more red. 4 Press the CH DOWN button to decrease the hue towards the green spectrum. The image becomes more gr...

35 Saturation 1 Press the CH UP button or CH DOWN button to select Saturation. 2 Press MENU to enter the Saturation menu. 3 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. 4 Press the CH DOWN button to decrease the saturation. The screen image becomes less v...

36 Sharpness 1 Press the CH UP button or CH DOWN button to select Sharpness. 2 Press MENU to enter the Sharpness menu. 3 Press the CH UP button to increase the sharpness. 4 Press the CH DOWN button to decrease the sharpness. 5 Press MENU again to confirm the setting and return to the Video Setting m...

37 Color Temperature 1 Press the CH UP button or CH DOWN button to select Color. 2 Press MENU to enter the Color menu. The following three color temperatures are available. Standard Color Press the CH UP button or CH DOWN button to select Standard, then press MENU . Warm Color Press the CH UP button...

38 Audio Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU to enter the Audio Setting menu. ETO ETO M a i n m e n u A u d i o S e t t i n g E N T E R

39 Treble 1 Press the CH UP button or CH DOWN button to select Treble. 2 Press MENU to enter the Treble menu. 3 Press the CH UP button to increase the treble. 4 Press the CH DOWN button to decrease the treble. 5 Press MENU to confirm the setting and return to the Audio Setting menu. E N T E R A u d ...

40 Bass 1 Press the CH UP button or CH DOWN button to select Bass. 2 Press MENU to enter the Bass menu. 3 Press the CH UP button to increase the bass. 4 Press the CH DOWN button to decrease the bass. 5 Press MENU to confirm the setting and return to the Audio Setting menu. E N T E R A u d i o S e t ...

41 Balance 1 Press the CH UP button or CH DOWN button to select Balance. 2 Press MENU to enter the Balance menu. 3 Press the CH DOWN button to shift the balance to the left speaker. 4 Press the CH UP button to shift the balance to the right speaker. 5 Press MENU to confirm the setting and return to ...

42 TV Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select TV Setting. 2 Press MENU to enter the TV Setting menu. ETO ETO M a i n M e n u T V S e t t i n g E N T E R

44 MTS 1 Press the CH UP button or CH DOWN button to select MTS. 2 Press MENU to enter the MTS menu. MAIN1 Press the CH UP button or CH DOWN button to select MAIN (default). MAIN is highlighted in red. 2 Press MENU again to confirm the selection. SAP1 Press the CH UP button or CH DOWN button to sele...

45 Auto Program 1 Press the CH UP button or CH DOWN buttons to select Auto Program. 2 Press MENU to enter the Auto Program menu. 3 Press the CH UP button or CH DOWN buttons to select Yes or No. 4 Press MENU . The screen goes blank and the chan-nel indicator values range from 2 to 69 (antenna connect...

46 Manual Program This function allows you to locate channels for adding to or erasing from preset channels . 1 Press the CH UP button or CH DOWN buttons to select Manual Program. 2 Press MENU to enter the Manual Program menu. 3 Press the CH UP button or CH DOWN buttons to find the channel you want ...

48 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu. ETO M a i n M e n u M i s c e l l a n o u s E N T E R

49 OSD Position 1 Press the CH UP button or CH DOWN button to select OSD Position. 2 Press MENU to enter the OSD Position menu. The following options are available. Horizontal Position1 Press the CH UP button or CH DOWN button to select H. Position. 2 Press MENU . 3 Press the CH DOWN button to move ...

50 Language 1 Press the CH UP button or CH DOWN button to select Language. 2 Press MENU to enter the Language menu. The screen displays the available OSD languages: English and T-Chinese (Traditional Chinese). 3 Press the CH UP button or CH DOWN button to select a language. 4 Press MENU to confirm y...

51 Sleep Timer The sleep timer turns the TV off automatically after a set period of time. 1 Press the CH UP button or CH DOWN button to select Sleep. 2 Press MENU to enter the Sleep menu. 3 The screen displays the available sleep timer setting: – Off– 30 minutes– 60 minutes– 90 minutes– 120 minutes ...

53 Reset The Reset function returns all of your TV’s user settings to their fac-tory defaults. Warning: The reset function will erase all of your custom and favorite channel settings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset fu...

54 Turn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish. Wipe the shell with a dry soft cloth and us...

55 Situation Solution No picture and sound. • Connect the power cord properly. • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the CH UP button or CH DOWN button to switch to other TV stations. • Check the T...

57 K215-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600 (vertical) Maximum Display Area 194.4 mm (H) x 145.8 mm (W) TV System NTSC Video System S-Video Input and Composite Video Input (through the 4-IN-1 cable) Audio System Input: RCA Jack (L/R Audio Input th...

58 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV Community Antenna Television, the original name for cable TV....

59 S-Video Super-video, a video cabling standard used to transmit video by keeping brightness (Y) and color information (C) on separate channels. Most often used with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic- tures. VCD A compact disk format developed in 1993 by ...