HANNspree DT0B-10A1 - Manuals

5 Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused. Although safety has been taken into consideration during the design and production of this product, electric shock or fire can result when the product is misused. To prevent potential danger, fol...

6 Power Supply Safety Notes 1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this product's plug or leaves the plug exposed. 2. This product has a 3-pin grounded plug. The third pin connects to ground; do not remove it. 3. If the power cord or plug is d...

8 Optimal Viewing Distance 102 cm M EN U SO UR CE CH CH V V

9 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s ...

11 Personal Safety To avoid overloading the power supply, do not plug too many electrical devices into an outlet or extension cable. Dangerous high-voltage electric power compo-nents are located inside the TV. To avoid electric shock, do not disassemble the casing. Do not place or drop metals, small...

12 Installation To avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from power trans-mission lines to avoi...

14 FCC Compliance Statement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and (2) this device must accept any interference received, including interference that may cause undesired o...

15 DOC Compliance Notice 1 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This device complies with Canada ICES-003 Class B. CE Conformity Stateme...

16 Thank you for purchasing this Liquid Crystal Display TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design of the product is featuring ”Mickey Mouse” ,which makes it a fun addition to any room. You can watch broadcast or cable television channels, and easily connect a VCR...

17 Make sure the following components are included in the box. Contact your vendor immediately if anything is missing or damaged. TV MENU SOURCE CH CH V V User’s Manual Quick Start Guide Wire Material Package GWA18 30 0V 80 C V W -1 E 7 7 8 7 4 Power Cord Power Adapter 4-IN-1 Cable Quick Start Guide...

18 Front View De s c r i p t i o n F u n c t i o n 1 Menu Turns the On-Screen Display (OSD) menus on and off. 2 Power / Power LED Turns the TV on and off. Green LED indi-cates power on. 3 Select channel Changes the channel. Press CH S to increase the channel number. Press CH T to decrease the channe...

19 Input and Output Por ts De s c ri p t i o n F u n ct i o n 1 Headphone line out Connects to headphones or other audio device. 2 Left and right audio in (of AV1) Connects to VCR/VCD/DVD player CVBS RCA left and right audio cables (white and red). 3 Video in (of AV1) Connects to VCR/VCD/DVD player ...

20 Connecting to an Antenna/Cable TV 1. Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2. Connect the other end of the VHF/UHF (Antenna) or CATV cable to the Antenna socket or CATV cable. NoteIf you cannot receive channels after connecting...

21 Connecting to AV Devices Connect external devices such as VCD/DVD players or VCRs to the TV using the AV1 and AV2 ports on the back of the TV. Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player. Actual connections vary a...

22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digital camera. Actual connections vary according to the make and model of the device. NoteThe cables are color-coded (black, red, white, yellow). Connect each color-coded cab...

23 Connecting Exter nal Speakers and Headphones Headphones or external speakers may be used to listen to the TV instead of the built-in speakers. Connect your headphones to the speaker/headphone line out port as illustrated. Notes • External speakers or headphones are not included with the product. ...

24 Connecting the Power Adapter 1. Connect the power cord to the power adapter as illustrated. 2. Plug the power adapter connector into the DC-IN on the rear panel of the TV. 3. Insert the three-pronged plug at the other end of the power cord into a power outlet. Refer to the “Power Supply Safety No...

25 Using the Remote Control For best results, use the remote control within a distance of 5 meters from the front of the TV’s signal sensor. Do not exceed an angle of 30 degrees when pointing at the signal sensor. Refer to the following illustration. M EN U SO UR CE CH CH V V 3m 30 30 5m 3m Using th...

26 Tur ning the TV On and Off 1. Press the POWER button; the power indicator LED changes from red to green, indicating that the power has been turned on. 2. Press the POWER button again; the power indicator LED changes from green to red, indi- cating that the TV is in standby (off) mode. Selecting C...

27 Switching Source Signals Press the SOURCE button on the remote control or the SOURCE button on the control panel to select the incoming source sig-nal.The current source setting CH xx appears on the top left corner of the screen, AV1 or AV2 appears on the bottom right corner of the screen. Note: ...

28 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describes how to change each of the available settings. The OSD can be used with either the remote control or the front con- trol panel. The following sections explain how to adju...

30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH DOWN button or CH UP button to select Contrast. 3. Press MENU . The contrast slide bar is highlighted. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contrast. 6. Press MENU to confirm ...

31 Video Setting Press the MENU button to enter the OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select Video Setting. 2. Press MENU to enter the Video Setting menu. Video Setting Hue G B R G R

32 Hue 1. Press the CH DOWN button or CH UP button to select Hue. 2. Press MENU to enter the Hue sub- menu. 3. Press the CH UP button to increase green and decrease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the Video Setti...

33 Saturation 1. Press the CH DOWN button or CH UP button to select Saturation. 2. Press MENU to enter the Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the saturation. 5. Press MENU to confirm the setting and return to the Video Se...

34 Sharpness 1. Press the CH DOWN button or CH UP button to select Sharpness. 2. Press MENU to enter the SHARP- NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpness. 5. Press MENU to confirm the setting and return to the Video Setti...

36 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select Audio Setting. 2. Press MENU to enter the Audio Setting menu. Main Menu ETC Audio Setting

37 Treble 1. Press the CH DOWN button or CH UP button to select Treble. 2. Press MENU to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu. TRE TRE ...

38 Bass 1. Press the CH DOWN button or CH UP button to select Bass. 2. Press MENU to enter the Bass sub- menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu. TRE TRE BASS BAS...

39 Balance 1. Press the CH DOWN button or CH UP button to select Balance. 2. Press MENU to enter the Balance submenu. 3. Press the CH DOWN button to shift the balance to the left speaker. 4. Press the CH UP button to shift the balance to the right speaker. 5. Press MENU to confirm the setting and re...

41 Note The setting menu is available when current select source is TV. TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select TV Setting. 2. Press MENU to enter the TV Setting menu. Main Menu ETC TV Setting

44 Auto Program 1. Press the CH DOWN button or CH UP button to select Auto Program. 2. Press MENU to enter the Auto Pro- gram Setting submenu. 3. Press the CH DOWN button or CH UP button to select ON or OFF and press MENU . The screen shows “Auto Program...” and the channel indicator increments from...

45 Manual Program 1. Press the CH DOWN button or CH UP button to select “Manual Program”. 2. Press MENU to enter the Manual Pro- gram submenu. 3. Press the CH DOWN button and the CH UP button to find the channel you want to add. Press MENU to select the channel. 4. Press MENU to exit, and then acces...

47 Favorite Channels 1. Press the CH DOWN button or CH UP button to select Favorites CH. Edit. 2. Press MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favorite channels: M1, M2, M3, and M4. 4. Press the CH DOWN button and the CH UP button to select the channel number y...

48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button or CH UP button to select Miscel- laneous Setting. 2. Press MENU to enter the Mis- cellaneous Setting menu. Main Menu ETC Miscellaneous Miscellaneous

49 Language 1. Press the CH DOWN button or CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T- Chinese (Traditional Chinese). 4. Press the CH DOWN button and the CH UP button to select a language. The OSD la...

50 Sleep Timer The sleep timer turns the TV off automatically after a set period of time. 1. Press the CH DOWN button or CH UP button to select Sleeper. 2. Press MENU to enter the Sleeper submenu. 3. The screen displays the available sleep timer setting: Off, 30, 60, 90, and 120 minutes. 4. Press th...

51 OSD Display This setting allows you to set the amount of information that appears on the LCD screen when the DISPLAY button is pressed. You can choose from three settings: Off, Portion, or All. 1. Press the CH DOWN button or CH UP button to select OSD Display. 2. Press MENU to enter the OSD Dis- ...

52 Time Setting This section shows you how to change your TV’s clock setting. 1. Press the CH DOWN button or CH UP button to select Time Setting. 2. Press MENU to enter the Time Set- ting submenu. 3. The screen displays the current set- ting. The hour is highlighted in yellow. 4. Press the CH DOWN b...

53 Reset The Reset function returns all of your TV’s user settings to their fac-tory defaults. Warning: The reset function erases all of your custom and favorite channel set-tings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset funct...

54 Turn the power off before you begin cleaning the TV. Use a clean lens cloth to remove dust and finger-prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid the damaging the finish. Wipe the shell with a dry soft cloth and use neutral cle...

55 S i t u a t i o n S o l u t i o n No picture and sound. • Connect the power cord properly. • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through con- nected video sources. • Press CH UP or CH DOWN to switch to other TV stations. • Check the TV...

57 I t e m Sp e c i f i c a t i o n s DT0B-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 194.4 mm (W) x 145.8 mm (H) TV System NTSC Video System AV1: CVBS RCA jackAV2: S-Video or CVBS: 10-pin mini-DIN Audio System (Input) AV1:...

58 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast). CATV Community Antenna Television, the original name for cable TV....

59 S-Video Super-video, a video cabling standard used to transmit video by keeping brightness (Y) and color information (C) on separate channels. Most often used with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-tures. VCD A compact disk format developed in 1993 by S...