Hanns.G HU196D - Manuals

Hanns.G HU196D – Manual in PDF format online.

Manuals:

Manual

Manual Hanns.G HU196D

Summary

Page 3 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA

User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15...

Page 5 - TCO Development; Flame retardants

User’s Manual Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecolog...

Page 6 - TABLE OF CONTENTS

User’s Manual TABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 7 PRECAUTIONS ......................................................................................... 7 SPECIAL NOTES ON LCD MONITORS .............................

Page 7 - SAFETY NOTICE; with the emission limits.; PRECAUTIONS; time. This will protect the monitor from damage due to power surges.

User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. Th...

Page 8 - SPECIAL NOTES ON LCD MONITORS; % or less such as a missing pixel or a pixel lit all of the time.

User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappea...

Page 9 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor

User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES • 19” TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1280 X 1024 @60Hz • EPA ENERGY STAR ® • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package shoul...

Page 10 - INSTALLATION INSTRUCTIONS; Install; Figure.1. Installing and Removing the Base; POWER

User’s Manual INSTALLATION INSTRUCTIONS Install Remove Figure.1. Installing and Removing the Base POWER POWER SOURCE: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or ...

Page 11 - CONTROLS AND CONNECTORS; monitor and connect the other end to the computer’s DVI port.

User’s Manual CONTROLS AND CONNECTORS CABLE CONNECTIONS: Turn off your computer before performing the procedure below. 1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 2. Connect one end of the 24-pin DVI cable (Dual inpu...

Page 12 - ADJUSTING THE VIEWING ANGLE; the monitor’s angle to your own preference.

User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monit...

Page 13 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; The power cord should be connected.

User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord s...

Page 14 - FRONT PANEL CONTROL; function is activated.; Auto Adjust button:; When OSD menu is in off status, press this button to

User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Green — Power On mode. Orange — Off mode. • MENU / ENTER: 1. Active OSD menu or function adjust confirm or 2. Exit OSD menu when in volume OSD status. • Volume < >: 1. Ac...

Page 15 - HOW TO ADJUST A SETTING

User’s Manual HOW TO ADJUST A SETTING OSD Diagram OSD Description Brightness adjustment: Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Contrast adjustment: Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Ho...

Page 16 - OSD Diagram

User’s Manual OSD Diagram OSD Description Clock adjustment: Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase adjustment: Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of character...

Page 19 - PLUG AND PLAY

User’s Manual OSD Diagram OSD Description Recall the factory settings: Select the 「 Factory Preset 」 option to change between the monitor’s default settings and the current settings. Enter the option and select On or Off. Input Setting: Select the 「 Input Setting 」 option to change between the analo...

Page 20 - Q & A FOR GENERAL DEFECTIVE

User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL DEFECTIVE PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V...

Page 21 - ERROR MESSAGE & POSSIBLE SOLUTION; CABLE NOT CONNECTED :; FACTORY PRESET TIMING TABLE:

User’s Manual ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuita...

Page 22 - APPENDIX; SPECIFICATIONS

User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 48.2cm(19.0") Pixel pitch 0.294mm(H) x 0.294mm(V) LCD Panel Brightness 250cd/m 2 (Typical) Contrast 600:1 (Typical) Viewable angle 140 ° (H) 130 ° (V) Response time 8 ms Video R,G,B Analog Interface Digital ( Dual-Input Mode...

Page 23 - CONNECTOR PIN ASSIGNMENT

User’s Manual CONNECTOR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable: 1 5 6 10 11 15 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Grou...