Hanns.G HP222 - Manuals

Hanns.G HP222 – Manual in PDF format online.

Manuals:

Manual

Manual Hanns.G HP222

Summary

Page 2 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA

User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15...

Page 3 - Ergonomics

User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, d...

Page 4 - RECYCLING INFORMATION; For more information, please visit

User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable material...

Page 5 - TABLE OF CONTENTS

User’s Manual TABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAUTIONS................................................................................................. 6 SPECIAL NOTES ON LCD MONITORS ...............

Page 6 - SAFETY NOTICE; PRECAUTIONS; will protect the monitor from damage due to power surges.

User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. Th...

Page 7 - SPECIAL NOTES ON LCD MONITORS; less such as a missing pixel or a pixel lit all of the time.

User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappea...

Page 8 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor

User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES • 22” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1680 X 1050 @60Hz • EPA ENERGY STAR ® • GP Green Product • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PA...

Page 9 - ADJUSTING DISPLAY HEIGHT; Note

User’s Manual ADJUSTING DISPLAY HEIGHT 1. In order to achieve the best visual effects, it is recommended that the display be adjusted so that the entire screen is facing you before you adjust the display height according to your personal preference. 2. Hold the top edge of the display (fig. A) and r...

Page 10 - INSTALLATION INSTRUCTIONS; Figure.1. Installing and Removing the Base; POWER

User’s Manual INSTALLATION INSTRUCTIONS INSTALL & REMOVE Figure.1. Installing and Removing the Base POWER POWER SOURCE: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V ...

Page 11 - SETTING THE MONITOR ON THE WALL; Remove the four (4) screws so that the stand base can be removed.

User’s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor. 3. Remove the f...

Page 12 - MAKING CONNECTIONS; CONNECTING TO A PC

User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Connect one end of the DVI cable (optional) to the back of the mon...

Page 13 - ADJUSTING THE VIEWING ANGLE; monitor’s angle to your own preference.

User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monit...

Page 14 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; Analog Input Models

User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power co...

Page 15 - FRONT PANEL CONTROL

User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. Turn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status. • Ad...

Page 16 - Resolution; to ship your monitor.

User’s Manual Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔ 1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 1400x1050@75Hz ↔ 1680x1050@75Hz 1400x900@60Hz ↔ 1600x900@60Hz...

Page 17 - HOW TO ADJUST A SETTINGS; BRIGHTNESS/ CONTRAST

User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRA...

Page 18 - INTERMEDIATE; [This feature is limited to

User’s Manual display, which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands. [The availability of this function depends upon the selected model] H-POSITION Select the 「 H-POS...

Page 20 - PLUG AND PLAY

User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its di...

Page 21 - Q & A FOR GENERAL PROBLEMS

User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the...

Page 23 - ERROR MESSAGE & POSSIBLE SOLUTIONS; CABLE NOT CONNECTED :; Check the signal-cable’s connection pins for damage.; MODE

User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to un...

Page 25 - APPENDIX; SPECIFICATIONS

User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 22.0" LCD Panel Pixel pitch 0.282mm(H) x 0.282mm(V) H-Frequency 24KHz – 83KHz Video V-Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution 1680 x 1050 @60Hz Plug & Play VESA DDC2B TM , DPMS ON Mode 35W(Typical...