Hanna Instruments HI 98804 - Manuals

Page 2 - SETUP MODE

3 2 Remove the instrument from the packing material and examine itcarefully to make sure that no damage has occurred during shipping.If there is any damage, notify your Dealer.Each thermometer is supplied complete with: • AA size Alkaline Batteries (4 pcs) • Instruction Manual • Paper rolls (5 pcs) ...

Page 3 - PAPER

5 4 FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION 1) Power adapter plug2) Temperature Probe Connectors (1 or 4 according to model)3) LCD Display4) PAPER key, to move the paper up 5) ON/OFF key, to turn the meter on or off 6) ALT ke...

Page 4 - Range; x1.5V AA alkaline type/350 hours typical life

7 6 INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION INITIAL PREPARATION Each meter is supplied complete with batteries. Remove the backcover, unwrap the batteries and install them while paying attention tothe polarity. Alternatively, connect the HI 710005 or HI 710006...

Page 5 - Code

9 8 PASSWORD PROTECTION Setting of the GLP parameters (calibration alarm time-out, instrumentID code, time and date) can be password protected. If password is setto a value different from 0000 (factory setting), the user will be askedto enter the password.• Select the desired GLP parameter code.• En...

Page 6 - TO SCAN LOGGED DATA; Printing logged data; SETUP MESSAGES LIST

11 10 cod. 33: Year cod. 40: Auto OFF cod. 41: Battery test cod. 50: Baud rate cod. 60: Release code cod. 70: Thermocouple type cod. 71: Celsius or Fahrenheit cod. 99: Pass Code Some of the most important functions are explained below in a step bystep sequence. TO SCAN LOGGED DATA (HI98801 and HI988...

Page 7 - Note; DELETE LOGGED DATA

13 12 TO RESET PRINTING SAMPLE NUMBER (HI98701 and HI98704 only)This feature resets the print on demand sample number to 001.• Select the code 05• A scrolling message will be displayed.• Press the ALT and CFM keys to confirm reset or ALT and FNC to escape. GLP DATA Cod. 10 - viewing GLP data • Selec...

Page 8 - for technical personnel only); TAKING TEMPERATURE MEASUREMENTS

15 14 The meter is factory calibrated. However, as a general rule, it isrecommended to have all thermometers recalibrated at least once ayear. It is recommended that recalibration is performed by authorizedtechnical personnel only to assure the accuracy of the instrument.Contact your nearest HANNA s...

Page 9 - TIMED LOGGING MODE; PRINTING / LOGGING FUNCTIONS; THERMOCOUPLE CALIBRATION

17 16 Two different modes to print / log data are available:1. Timed logging ; samples are stored and printed (if print function is active) at fixed time intervals. Data are stored in the lots 01 to 16. 2. Log on demand ; samples are stored and printed (if print function is active) when the LOG key ...

Page 10 - TO VIEW LOGGING INFORMATION; TO STOP LOGGING

19 18 the value will be stored in the lot 00 (log on demand data area). Ifthe print function is enabled, a printout is also produced providing thefollowing information: a - Dateb - Sample numberc - Timed - Readings ("----" means out of range or probe not connected) Note: When the Log on dema...

Page 11 - PRINTING FUNCTIONS; TIMED PRINTING MODE

21 20 TO STOP PRINTING In order to stop the recording mode, pressALT and LOG keys (press ON/OFF first, ifmeter is in sleep mode).A last printout reporting the number of printedsamples (e.g. S.00009) will be produced. Notes: • It is recommended to use the adapter during printing mode, especially when...

Page 12 - LCD BACKLIGHT

23 22 Windows ® is registered Trademark of "Microsoft Co." Excel © Copyright "Microsoft Co." Lotus 1-2-3 © Copyright "Lotus Co." HI98801 and HI98804 contain infrared transmitting circuitry. Ensure there isn't any logging process active.Press CH/TIME or TEMP/TIME to set the me...

Page 16 - meters are warranted for two years

31 30 Recommendations for Users Before using these products,make sure that they are entirelysuitable for the environment inwhich they are used.Operation of these instrumentsin residential area could causeunacceptable interferences to ra-dio and TV equipments, requir-ing the operator to take all nec-...

Page 17 - HANNA LITERATURE

MAN98804R1 2/99 h t t p : / / w w w . h a n n a i n s t . c o m h t t p : / / w w w . h a n n a i n s t . c o m h t t p : / / w w w . h a n n a i n s t . c o m h t t p : / / w w w . h a n n a i n s t . c o m h t t p : / / w w w . h a n n a i n s t . c o m PRINTED IN PORTUGAL HANNA LITERATURE HANNA L...