Haier LT22A1 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENT

1 TABLE OF CONTENT FOR YOUR SAFETY ........................................................................................ 2 PRECAUTIONS AND REMINDERS ........................................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................................................... 4 PA...

Page 4 - The lightning flash with arrowhead; Batteries installed warning; NOTICE; void the user's authority to operate the equipment.; FOR YOUR SAFETY

2 SYMBOL SYMBOL DEFINITION SA 1965 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of...

Page 5 - PRECAUTIONS AND REMINDERS; Place unit on even surfaces.; Avoid Dropping

3 PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if is malfunction like no picture, no video/audio, smoke and bad odor from TV. Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when using i...

Page 6 - IMPORTANT SAFETY INSTRUCTIONS; Read before operating equipment; receptacles, and the point where they exit from the apparatus.

4 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in acc...

Page 7 - PACKAGE CONTENTS

5 21. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 22. Power Lines – An outdoor antenna should be located away from power lines.23. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the ...

Page 8 - PREPARATION; IMPORTANT; : Do not apply pressure to the; NOTE; Wall mount bracket & screws are not; Install the base stand place the TV

6 PREPARATION IMPORTANT : Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. PREPARING YOUR LCD HDTV FOR WALL MOUNTING We suggest that you keep your TV at least 2.36 inch...

Page 9 - Power Key; Connect the antenna cable or CATV cable; TV ANTENNA; at

7 The TV will be turned on in a minute with display on the screen. Vol USB Power Key flame sources, such as lighted candles, should be placed on or in the vicinity.Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Connect the a...

Page 10 - PERIPHERAL CONNECTION GUIDE; 2、14、15

8 PERIPHERAL CONNECTION GUIDE 19/22 26/32 42 HDMI 3 VIDEO AUDIO CO M M O N I NT ER FA CE R L 42 ① ② ③ ④⑤⑥ 19-32 ① ② ③ ④ ⑤⑥ ⑮ AC POWER ⑦ ⑪ ⑩ ⑪ ⑪ ⑧ ⑬ ⑧ ⑬ ⑦ ⑩ ⑫ ⑨ ⑭ ⑫ ⑫ ⑭ ⑨ ⑨ ⑧ ⑦ ⑩ ① COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please contact your service provider for details. ②、③、...

Page 11 - OPERATING INSTRUCTIONS; TO USE THE FRONT PANEL CONTROL; CH

9 OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROL 1 23 56 4 7 1 VOL + VOL + : Press to increase the sound volume level. 2. VOL - VOL - : Press to decrease the sound volume level. 3. CH ▲ CH ▲ : Press to select the next higher Programme number. 4. CH ▼ CH ▼ : Press to select the next lower Prog...

Page 12 - TO USE THE REMOTE CONTROL; POWER

10 TO USE THE REMOTE CONTROL POWER Press to turn ON/OFF (standby) the TV. SOURCE Press repeatedly to choose the various input sources. Number buttons Press to enter TV channel number to select channel. EPG Press to display the Electronic Programme Guide. PRE CH Press to display the previous channel....

Page 14 - VIEWING MODE ILLUSTRATIONS; Normal Mode; The original content would be at the centre of the screen.; Wide Mode; Same image in ZOOM mode

12 VIEWING MODE ILLUSTRATIONS Normal Mode The original content would be at the centre of the screen. 16:9 Content 4:3 Content Wide Mode The original content in this mode has to fill the entire screen of the display. 16:9 Content 4:3 Content ZOOM Mode For those wide format images which are originally...

Page 15 - CONNECTING EQUIPMENT; DTV

13 CONNECTING EQUIPMENT Coaxial (RF)Using Your Antenna or Digital Cable for DTV . 19"/22"/26"/32" 42" 1. Turn off the HDTV.2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the TV ANTENNA connector. 3. Turn on th...

Page 16 - Select ATV/DTV using the SOURCE button; If you have an off-air antenna or cable TV,; Connecting your HDTV Set-Top Box; Connect a HDMI cable to the HDMI; For HDTV Set-Top Boxes with DVI; Select HDMI using the SOURCE button on

14 4. Select ATV/DTV using the SOURCE button on the remote control or the control key on the side of the TV. NOTE  If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR. Connecting Your HDTV Set-Top BoxUsing HDMI (19”/22” only have one HDMI) HD...

Page 17 - Refer to your HDTV Set-Top Box user; Using the red and white connectors,

15 Using Component VideoConnecting your HDTV Set-Top Box (Better):19"/22"/26"/32" 42" 1. Turn off the HDTV and HDTV Set-Top Box. 2. Connect the Pr (red colour) connector on your HDTV Set-Top Box to the corresponding Pr (red colour) connector in the Component group. 3. Connect the...

Page 18 - For DVD Players with DVI:; end to your DVD player and the HDMI end; Refer to your DVD player user manual for

16 Using Coax (RF)19"/22"/26"/32" 42" 1. Turn off the HDTV and Set-Top Box.2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the TV input at the rear of the HDTV. 3. Turn on the HDTV and Set-Top Box.4. Select ATV/DTV using the...

Page 19 - Using SCART; player to the SCART socket of the HDTV.

17 Using Component VideoConnecting your DVD Player (Better)19"/22"/26"/32" 42" 1. Turn off the HDTV and DVD player.2. Connect the Pr (red colour) connector on your DVD player to the corresponding Pr (red colour) connector in the Component at the rear of the HDTV. 3. Connect the P...

Page 20 - Connect the Audio Out on your computer to

18 Using Composite (AV) VideoConnecting your DVD Player (Good) 1. Turn off the HDTV and DVD player.2. Connect the Video (yellow colour) connector on your DVD player to the Video (yellow colour) connector in the AV group. 3. Connect the R (red colour) and L (white colour) audio connectors on your DVD...

Page 21 - TO USE THE MENUS; Navigation Ring; PICTURE MENU

19 the remote, side of the HDTV or directly by pressing the PC button on the Remote. NOTE  For the best picture quality when connecting a computer through VGA, set your computer timing mode to native resolution of panel. Please refer to the PC or graphic card’s user guide for additional information...

Page 22 - SOUND MENU; TV MENU

20 SOUND MENU The Sound menu provides audio adjustment for user to modify the audio setting. Picture Sound ModeEqualizer 120HzEqualizer 500Hz Equalizer 5KHz Equalizer 1.5KHz Equalizer 10KHzBalanceVirtual SurroundDigital Audio Out Personal00 0 0 00OnPCM Enter Select Exit EXIT OK Sound TVFeatures Pare...

Page 23 - Tip: The skipped program may not be found; FEATURES MENU

21 3. 1st and 2nd Audio: Use this function when two or more audio languages are broadcast. This is the language to be used for digital channels if it is available. 4. Channels: Enter the channels submenu, and choose from Channel Scan, Update Scan, Single RF Scan, Analog Manual Scan, Channel Skip, Ch...

Page 24 - Teletext Language:; PARENTAL MENU

22 Picture Menu LanguagePicture FormatTime Teletext Language Subtitle Common InterfaceReset Default EnglishWide Enter Select Exit EXIT OK Sound TV Features Parental 1. Menu Language: To select the on-screen display menu language. 2. Picture Format: To select the available display format from Auto, N...

Page 25 - To clear all the settings in the; COMMON INTERFACE MODULE; - The Common Interface CI Slot, is designed; Correctly insert the CA Module and then; Select Common Interface to view the

23 Tip: Remember that 5351 is the default Change Password code. If your access code has been changed or you have forgotten the code, you can always get in by inputting the default code. 5. Clear All: To clear all the settings in the parental submenu. COMMON INTERFACE MODULE - The Common Interface CI...

Page 26 - OAD OPERATION; OAD for Software Update function:; When you get the updating news from; Operation; When you search the channel. You will get

24 Picture No CI card presented. Back EXIT Sound TV Features Parental fig. 67 5. When module is removed, the “Common Interface” menu will disappear from the screen. Picture No CI card presented. Back EXIT Sound TV Features Parental fig. 67 OAD OPERATION OAD for Software Update function: 1. When you ...

Page 27 - to; TIPS; Care of the screen; use a; Mobile telephone warning

25 3. After the programming , please use ▲ ▼ to confirm if you would like to restart the TV. The software will be updated completely after restart the TV. Software ID : XXXXXXXXSoftware upgrades successfully! Restart the TV now? Over Air Download Select Next Accept Reject Exit OK NOTE: You must not ...

Page 28 - PRODUCT SPECIFICATION; DISPLAY; mm

26 PRODUCT SPECIFICATION NOTE * This model complies with the specifications listed below.* Designs and specifications are subject to change without notice.* These models may not be compatible with features and/or specifications that may be added in the future. Model No. LT19A1 LT22A1 LT26A1 LT32A1 L...

Page 30 - BEFORE CALLING SERVICE

28 BEFORE CALLING SERVICE Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double ...

Page 31 - GLOSSARY; HDTV; High-Definition Multimedia Interface; Menu

29 GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input...

Page 32 - APPENDIX; Appendix 1

30 APPENDIX Appendix 1 VGA Timing table Item H.Freq.(KHz) Mode Resolution V.Freq.(KHz) 19"~32" 42" 1 31.469 IBM VGA 640x350 70.086 2 31.469 IBM VGA 720x400 70.087  3 31.469 IBM VGA 640x480 59.94   4 35 MACINTOSH 640x480 67 5 37.861 VESA 640x480 72.809 6 37.5 VESA 640x480 75 7 35.156 V...

Page 34 - INFORMATION; CE marking; SPECIFICATIONS

32 INFORMATION The shipped version of this device complies with the requirements of EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive" WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILIT...