Haier AS26DCBHRA-SET - Manuals

Page 2 - Contents; Installation Instructions

Contents Loading and Unloading/Transporting Management/Storage Requirements ............... ..............3 Installation Instructions ............................................... ............................................... ...............3 Relocation Procedures ..................................

Page 3 - produced; Read the precautions in this manual

WARNING: Use a cable of suitable length,Do not use tapped wires or an extension lead as this may cause overheating, electric shocks, fire or explosion. All the cables shall have got the local authentication certificate. During installation, when the connecting cables break off, it must be assured th...

Page 4 - GWP=global warming potential; IMPORTANT INFORMATION REGA-; CAUTION; that not thermally insulated.; HOW TO USE DRED APPLIANCE

1 1+2= kg R32 2 kg 2= 1= B C D F E kg A This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. Do not vent into the atmosphere. Refrigerant type: R32 GWP=global warming potential The filled out label must be adhered in the proximity of the product charging port (e.g. onto ...

Page 7 - Both the indoor unit and outdoor unit shall be reliably earthed.

Electrical Safety Requirements Note:1. The surrounding conditions (ambient temperature, direct sunlight and rainwater) shall be noticed during electrical wiring, with effective protective measures being taken. 2. Copper wire cable in line with local standards shall be used as the power line and co...

Page 9 - maintenance at the user’s site is not allowed.; Qualification Requirements of Maintenance Personnel

Relocation Procedures Note: in case relocation is required, the joint of evaporator gas/liquid pipes of the indoor unit shall be cut off with a cutting knife. Connection is only allowed after re-flaring (the same to the outdoor unit). Maintenance Instructions Maintenance Precautions Precautions Fo...

Page 10 - Inspection on Maintenance Environment; Continuous ventilation shall be maintained during maintenance.; Maintenance Site Requirements; maintenance site inside the basement is not allowed.; Leak Detection Methods

Inspection on Maintenance Environment Before operation, the refrigerant leaked in the room is not allowed. The area of the room in which maintenance is made shall be in line with the nameplate. Continuous ventilation shall be maintained during maintenance. Open fire or high-temperature heat ...

Page 11 - Maintenance Items; Maintenance Requirements; The cylinders of refrigerant shall be kept upright, and be fixed.; Maintenance of Electrical Components; with dedicated leak detection equipment.; Maintenance of Intrinsically Safe Elements; carried out, to ensure no leakage and reliable earthing.

Maintenance Items Maintenance Requirements Before the refrigeration system is operated, the circulating system shall be cleaned with nitrogen. Afterwards, the outdoor unit shall be vacuumized, the duration of which cannot be less than 30 minutes. Finally, 1.5~2.0MPa OFN shall be used for nitrogen ...

Page 13 - Recovery; recommended that the refrigerant be cleared thoroughly.

(5) In case the vacuum state cannot be reached, vacuumizing shall be carried out from numerous positions, to pump the refrigerant in each part of the system out; (6) It shall be guaranteed that the capacity of cylinders is sufficient before recovery; (7) The recovery equipment shall be started and o...

Page 14 - Please be subjected to the actual product purchased.; Optional parts for piping; Fixing of outdoor unit; Indoor/Outdoor Unit Installation Drawings; The models adopt; AIR OUTLET; When installing the unit to wall, roof or rooftop, fix a supporter

Please be subjected to the actual product purchased. F A C E D Optional parts for piping Non-adhesive tapeAdhesive tapeSaddle (L.S) with screwsConnecting electric cable for indoor and outdoor Drain hose Heating insulating material Piping hole cover Fixing of outdoor unit Fix the unit to concrete or ...

Page 17 - Open the window and well ventilated the room

WARNING CAUTION N Open the window and well ventilated the room explosion-proof fuse 13

Page 23 - Connection of pipes

Amax Bmax C D E 21 10 15 5 7 7 20 1. Outdoor unit Indoor unit A B Outdoor unit Indoor unit A B A B Outdoor unit Indoor unit Oil trap When bending the pipe, be careful not to crush it. To prevent breaking of the pipe, avoid sharp bends. Bend the pipe with a radius of curvature of 40 mm or over. Conne...

Page 26 - local

20 30 15 2.5 20 1 20 30 15 2.5 20 1 30 2.5 25 25 20 1 ceramic type of AC 250V, T25A. The explosion-proof breaker of the air conditioner should be all-pole switch. The distance between its two contacts should not be no A explosion-proof breaker must be installed. 24 1U 53 RAAFRA 2.6 kW 3.5 kW 5.3 kW ...

Page 27 - Outdoor Unit

3 Outdoor Unit 2 9 15 8 12 10 5 13 19 1 18 4 11 25 25 25 110 Suction temperature sensor failure When the The wiring of compressor is wrong or the connection is poor 17 16 15 Lack of refrigerant Check if there is leakage in the unit. m

Page 28 - For Haier Appliances

For Haier Appliances Australia 1300 729 948 | haier.com.au New Zealand 0800 424 372 | haier.co.nz Important notice of Disclosure: Copyright © Fisher & Paykel Appliances 2019. All rights reserved. 7KH SURGXFW GLPHQVLRQV DQG VSHFLƬFDWLRQV LQ WKLV GRFXPHQW DSSO\ WR WKH VSHFLƬF SURGXFWV DQG models d...