Grindmaster P300E - Manuals

Page 2 - Installation; Standard; WA R N I N G

Page 2 Shuttle Brewers & Airpot/Shuttle Brewers Installation (con't) Electric Hook-up 1) The electric ratings for your brewer are printed on its nameplate. Typical electric ratingsare:P300, P400, RAP300, RAP400Optional 120/208V, 3.8kW, 18A or 120/240V 5.0kW, 21A, 1 phase Standard 120/208V, 5.0kW...

Page 4 - Adjustments; Brew Volume, Brew Timer; Before making the timer adjustment, do the following:; Adjusting the Timer; Standard single batch timer:; Electrical Shock Hazard!

Page 4 Adjustments All adjustable components are located under the top cover. To access these parts: 1) Shut off the electric line to the brewer or unplug the brewer. 2) Remove the single screw fastening the top cover. Remove the top cover. 3) Pull forward and lift off the top cover. Brew Volume, Br...

Page 6 - To Adjust the Bypass:; Thermostat Adjustment; Standard Mechanical Thermostat:

Page 6 To Adjust the Bypass: 1) Shut off and open brewer as described at the beginning of the adjustments section. 2) Locate the bypass valve for the brew head you wish to adjust. Valve is on the right and frontof the BREW valve. 3) Open the valve (counter clockwise) to the desired setting. Use the ...

Page 8 - Cleaning; Dispose of grounds and rinse brew basket.

Page 8 Cleaning After Each Brew: 1) Dispose of grounds and rinse brew basket. 2) Rinse shuttle or airpot containers before reuse. Every Day: 1) Wash brew basket with warm soapy water. The wire basket is removable to aid cleaning. 2) Remove spray head(s), located above brew basket(s), using gloves or...

Page 9 - Urn cleaners that have been used successfully:; Service; common service tasks

Page 9 Weekly or Bi-Weekly, Depending on Use 1) Fill shuttles with one gallon, 2/3 full, of hot water. 2) Pour into the shuttle liners the recommended concentration of urn cleaner (excessive amounts of cleaner will attack the stainless steel). Urn cleaners that have been used successfully: DIP-IT, m...

Page 11 - Replace level control.

Page 11 Troubleshooting: Filling, Heating, and Brewing Overfilling watertank even whenpower is off. Fill valve not sealingproperly. Fill valve installedbackwards. Water entering tankcontinuously, usuallyslowly. Look for direction ofarrow on valve body. Disassemble valve and clean outdirt. Valve may ...

Page 12 - Problem

Page 12 Shuttle Brewers & Airpot/Shuttle Brewers If you still need help, call our Technical Service Department at (502) 425-4776 or (800) 695-4500 (USA &Canada only) Monday thru Friday 8 am - 8 pm EST or an authorized service center in your area. Pleasehave the model and serial numbers ready...

Page 13 - Brewing Problems

Page 13 Troubleshooting: Filling, Heating, and Brewing Brewing Problems The brewing system consists of the following components: • Start and Stop, switches located in the top control panel.• Brew Timer, located in the top control section under the top cover.• Brew Valve, located in the top control s...

Page 14 - Parts Illustration for Models P300E & P400E; Item; FRONT

Page 14 Parts Illustration for Models P300E & P400E Shuttle Brewers & Airpot/Shuttle Brewers Item Part # Description Item Part # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOOT 13 A725-081 BRASS SPRAY TEE W/ BYPASS TUBING 1 A545-015 LEG, 4” SS (OPTIONAL) 14 A530-009 BREW TIMER 0-8 MINUTES ...

Page 15 - Parts Illustration for Model RAP400E

Page 15 Parts Illustration for Model RAP400E Shuttle Brewers & Airpot/Shuttle Brewers Item Part # Description Item Part # Description 1 A548-072 LEG, RUBBER (RAP400) 11 A515016 PILOT LIGHT 1 A545-004 LEG, PLASTIC 4” (OPTIONAL RAP 400) 12 A725-082 SPRAY TEE KIT W/ BYPASS PLUG 1 A548-090 LEG, PLAS...

Page 16 - Parts Illustration for Model RAPS400E

Page 16 Parts Illustration for Model RAPS400E Shuttle Brewers & Airpot/Shuttle Brewers FRONT Item Part # Description Item Part # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOOT 16 A725-081 BRASS SPRAY TEE W/ BYPASS TUBING 1 A545-015 LEG, 4” SS (OPTIONAL) 17 A585-021 SPRAY TUBING 3/8” ID X 5/8”...

Page 17 - Parts Illustration for Model VSB-400

Page 17 Shuttle Brewers & Airpot/Shuttle Brewers TOP (COVER REMOVED) FRONT FRONT (COVER REMOVED) 5 4 3 2 1 11 10 16 20 22 9 17 19 18 23 15 14 13 12 8 7 6 21 Parts Illustration for Model VSB-400 Item Part # Description Item Part # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOOT 12 A725-081 SPRA...

Page 18 - Parts Illustration for Shuttle CS-LL; FAUCET MODEL ES; GAUGE ASSEMBLY

Parts Illustration for Shuttle CS-LL Item Part # Description 1 A537-053 FAUCET MODEL ES 2 A522078 SHANK W/ CHROME BONNET 3 A718-018 GAUGE ASSEMBLY 4 A725-092 KIT, SHUTTLE LID A713-027 SS SHUTTLE COVER (not shown)* 5 A548-142 LID RETAINING CLIP 6 A548-140A61365 LID STOPPER W/ O-RING * S.S. Cover used...

Page 27 - Wiring Diagram for P300E/P400E, with 1 Batch Timer

Page 27 Shuttle Brewers & Airpot/Shuttle Brewers Wiring Diagram for P300E/P400E, with 1 Batch Timer NOTE: THIS DRAWING SHOWS COMPONENTS ON STANDARD MODEL ONLY. SEE 091-548 FOR WIRINGOF BREWER OPTIONS

Page 28 - Wiring Diagram for P300E/P400E, with 2 Batch Timer

Wiring Diagram for P300E/P400E, with 2 Batch Timer NOTE: THIS DRAWING SHOWS COMPONENTS ON STANDARD MODEL ONLY. SEE 091-548 FOR WIRINGOF BREWER OPTIONS Page 28 Shuttle Brewers & Airpot/Shuttle Brewers

Page 33 - Notes

Page 33 Shuttle Brewers & Airpot/Shuttle Brewers Notes

Page 36 - Grindmaster Corporation; WARRANTY; GENERAL WARRANTY INFORMATION; Coverage is not included for labor needed or caused by:; HOW TO OBTAIN WARRANTY SERVICES; by Grindmaster Corporation’s Service Dept.

Grindmaster Corporation 4003 Collins LaneLouisville, KY 40245 USA(502) 425-4776 (800) 695-4500FAX (502) 425-4664www.grindmaster.com © Grindmaster Corporation, 1995PRINTED IN USA Shuttle Brewer & Airpot/Shuttle Brewers WARRANTY GENERAL WARRANTY INFORMATION Grindmaster Corporation maintains the hi...