Grindmaster 250RH-2 - Manuals

Page 3 - Installation Instructions; Instructions; Figure A; correct

115 & 250 Series Coffee Grinders Page 2 Installation Instructions For Models 115A, 115AB, 250, 250A, 250AB, & 250-3A: 1. Please read this manual before operating the grinder. 2. Carefully remove grinder from carton. 3. Place grinder in position on shelf, counter or flat surface. 4. Plug grin...

Page 4 - Timer Adjustment; Digital Grinder Timer Adjustments (All Models)

Timer Adjustment The timer is preset at the factory, but should adjustments be required, follow the instructions below to set the grind times. Note: The grinder power must remain ON for timer adjustments. Digital Grinder Timer Adjustments (All Models) 1. To access timer, remove the timer cover by re...

Page 5 - Grind SelectorTM; The following are some recommended use conditions:; To Adjust the Fine Grind; Figure B: Fine Grind Adjustment

115 & 250 Series Coffee Grinders Page 4 Grind Selector™ For Models 115AB and 250AB: Models equipped with a Grind Selector™ are designated with a “B” at the end of the model number (Model 115AB & 250AB). Ifyour grinder is equipped with a Grind Selector™, refer to the following information:The...

Page 6 - Figure D: Grind Adjustment

Page 5 115 & 250 Series Coffee Grinders Coffee Grind Profile Before shipment, this grinder has been tested with coffee and has been accurately adjusted to deliver a standard autodrip grind. The Grinding Burrs are made of an extremely hard and wear resistant alloy. From time to time, grind adjust...

Page 7 - NOTE: Shipping bracket must be removed prior to removal of; Removal and Reinstallation of Hopper Assembly; Figure F: Upper Hopper Assembly

Cleaning Instructions The outside of the machine can be cleaned with a damp cloth or common household polishing wax. Grinding parts shouldbe cleaned with a stiff brush or dry cloth. Do Not Use Water. See “Shear Disc Replacement” for instructions on assembling and disassembling of grinder parts. Befo...

Page 8 - Shear Disc Replacement; Tools Required: Phillips Head Screwdriver and Pliers; Remove the Grind Cap by taking out the 2 Thumb Screws.; Figure H: Motor Assembly

Page 7 115 & 250 Series Coffee Grinders Shear Disc Replacement If the motor should run and no coffee is dispensed, the shear disc release may have operated. Should this occur,perform the following operations in the sequence given (see Figure H). Tools Required: Phillips Head Screwdriver and Plie...

Page 9 - CAUTION: Unplug the machine before cleaning or servicing the unit.; Problem; Knobs do not operate smoothly; continued on next page

115 & 250 Series Coffee Grinders Page 8 Troubleshooting Guide The following procedures must be performed by a qualified service technician. CAUTION: Unplug the machine before cleaning or servicing the unit. Problem Possible Cause Solution Grinder will not start when START button is pushed • Plug...

Page 10 - Loud grating noise

Page 9 115 & 250 Series Coffee Grinders If you still need help, call our Service Department at (502) 425-4776 or (800) 695-4500 (USA & Canada only)(Monday through Friday 8am-6pm EST) or an authorized service center in your area. Please have the modeland serial number ready so that accurate i...

Page 12 - Exploded View Parts List - 115V

Page 11 115 & 250 Series Coffee Grinders Exploded View Parts List - 115V Models 115A, 115AB, 250, 250A, 250AB & 250-3A Item No. Description 115A 115AB 250 250A 250AB 250-3A 1 HARNESS, 115/250 A & AB 86037 86037 86037 86037 86037 86037 2 HARNESS, 250 SERIES DIGITAL AUGER 86125 86125 86125...

Page 14 - Exploded View Parts List - 230V

Exploded View Parts List - 230V Models 115A, 115AB, 250, 250A, 250AB & 250-3A Item No. Description 115A 115AB 250 250A 250AB 250-3A 1 HARNESS, 115/250 A & AB 86037 86037 86037 86037 86037 86037 2 HARNESS, 250 SERIES DIGITAL AUGER 86125 86125 86125 86125 3 HARNESS, DIGITAL SWITCH 86122 86122 ...