GPX PF 738 - Manuals - manualsarea.com

Page 2 - Warnings and Precautions

2 Warnings and Precautions To PReVenT FIRe oR sHoCK HaZaRDs, Do noT eXPose THIs UnIT To RaIn oR MoIsTURe. WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it ...

Page 3 - Important safety Instructions

3 Important safety Instructions 1. Read Instructions - all the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - all warning on the product and in t...

Page 5 - PUSH

5 Powering the Unit Changing the Remote battery The Remote Control has a button cell battery pre loaded into it. Step 1: Push the Release button and pull out the battery Compartment to access the battery. Step 2: Replace the old battery with an equivalent new battery (CR2025). Step 3: The positive s...

Page 6 - setting the Time; setting the Date

6 setting the Time Step 1: Press the Power Button to turn the unit on. Step 2: navigate to the setup Menu on the unit by selecting “setup” on the main menu. Step 3: Go to the third option on the setup Menu, which is “Custom setup”. The last option in Custom setup is “set Time” Step 4: Press the Play...

Page 7 - Viewing Photos; loading Photos onto the Unit

7 Viewing Photos Step 1: Press the Power Button to turn the unit on. Step 2: To play photos that are loaded onto the unit, highlight Photo on the main menu, and press the Play/Enter Button . Step 3: To play photos from a memory card or thumb drive, insert the external storage device into the unit, h...

Page 8 - Main Menu

8 Main Menu Photo select the Photo option to view photos loaded onto the unit. Setup select the setup option to adjust the Interval Time, Transition Effect, Play Mode, Show Type, TFT Brightness, TFT Contrast, TFT Saturation, OSD Language, Style, Media, Default, and Set Time. Calendar select the Cale...

Page 9 - operational notes

9 operational notes • In order to play your photos, videos and music, you will need one of the following: a Usb mass storage device (thumb drive) or an sD/MMC/XD/Ms memory card . • You cannot access an external memory card when a Usb mass storage device is connected. • You cannot play photo slidesho...

Page 10 - Taking a Frame off

10 Taking a Frame off Step 1: Lay the unit down on a flat surface, with the display facing upward. Step 2: Place a soft cotton cloth over the display. This will keep the display clean of finger prints while changing the frame. Step 3: Put your thumbs just inside the frame, over the cloth covered dis...

Page 11 - Putting a Frame on

11 Putting a Frame on Step 1: If there is currently a frame on the unit, remove it and grab the desired frame. Step 2: Match the small clear window on the frame with the infrared receiver on the unit. • If the small clear window on the frame is not matched up with the infra - red receiver on the uni...

Page 12 - locations of Controls

Page 13 - Control Definitions

13 11 10 7 Control Definitions 1 LCD Display Use the lCD Display as the primary interface for viewing digital photos loaded onto the frame and for navigating the unit’s menus. 2 SD/MMC/XD/MS Memory Card Slot Use the sD/MMC/XD/Ms Memory Card slot to load the named memory card types onto the unit. 3 U...