Gigabyte Technology TEG-S50TXE - Manuals

Page 3 - This is a product of VCCI Class A Compliance.

FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. ...

Page 7 - Unpacking and Setup.

1 A B O U T T H I S G U I D E This user’s guide tells you how to install your 5-Port 1000BASE-T Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the 5-Port 1000BASE-T Gi...

Page 9 - N T R O D U C T I O N; Gigabit Ethernet Technology

3 I N T R O D U C T I O N This section describes the features of the 5-Port 1000BASE-T Gigabit Ethernet Switch, as well as providing some background information about Gigabit Ethernet and switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utiliz...

Page 10 - Switching Technology

4 servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the M...

Page 11 - Features

5 impractical. Today’s switches are an ideal solution to most kinds of local area network congestion problems. Features The 5-Port 1000BASE-T Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increas...

Page 13 - Unpacking; Technical

7 U N P A C K I N G A N D S E T U P This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: One 5-Port 1000BASE-T Gigabit Ethernet Switch Four rubber f...

Page 15 - Front Panel; LED Indicators; Rear Panel

9 I D E N T I F Y I N G E X T E R N A L C O M P O N E N T S This chapter describes the front panel, rear panel and LED indicators of the Switch Front Panel The figure below shows the front panels of the switch. Front panel view of the Switch LED Indicators Comprehensive LED indicators display the co...

Page 16 - POWER

10 DC Power Jack: Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. 1000BASE-T Ports: Five Gigabit Ethernet ports of 10/100/1000Mbps Auto-Negotiation interface. LED Indicators The LED indicators of the ...

Page 19 - General

13 T E C H N I C A L S P E C I F I C A T I O N S General Standards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data Transfer Rate: 10Mbps (Half-duplex) Ethernet: 20Mbps (Full-duplex) 100Mbps (Half-duplex) Fast Ethernet: 200Mbps (Full...