Page 2 - INSTALLATION INSTRUCTIONS; IMPORTANT OPERATING CONDITIONS; Crankcase oil should be changed after the
INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connec-tions, and other system areas. The use of adampener with Giant Industries, Inc. pumps isoptional, although recommended by GiantIndustries, Inc. to further reduce system pulsa-tion. Da...
Page 3 - REQUIREMENTS; Specifications; be specified when
P217A-3100/5100 HORSEPOWER REQUIREMENTS RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI1725 1.7 0.9 1.4 1.7 2.0 2.3 3000 3.0 1.7 2.5 3.1 3.5 4.1 3200 3.2 1.8 2.6 3.3 3.8 4.4 3450 3.4 1.9 2.8 3.5 4.0 4.7 Specifications Model P217A-3100/5100 NOTE: In order to drive the pump from the side opposite ...
Page 6 - The rating shown are the power
Specifications Model P220A-3100/5100 Volume ....................................................................................................... Up to 4.7GPMDischarge Pressure ..................................................................................... Up to 2000 PSIInlet Pressure .........
Page 8 - Plunger Packing Kit; Position; Valve Assembly Kit
ITEM PART NO. DESCRIPTION QTY. 1 08300 Crankcase 1 2 08301 Dipstick (Except P217, black ) 1 2 08480 Dipstick (P217, red ) 1 3 08302 Crankcase Plug Cover 1 3A 07190 Drain Plug & Gasket 1 4 08005 O-Ring 1 5 08185 Oil Drain Plug 1 6 07188-0100 Screw, 316 S.S. 4 6A 07223-0100 Spring Washer, 316 S.S....
Page 11 - Disassembly sequence of the; back; Before you begin, drain the oil from the crankcase.
Disassembly sequence of the back end of the P200A-3100/5100 series pump. 1) Before you begin, drain the oil from the crankcase. 2) Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). To remove the crankshaft (13),remove the bearing cover (7) and sight glass (8). Using a rubber mall...
Page 12 - GIANT INDUSTRIES LIMITED WARRANTY
GIANT INDUSTRIES, INC. , 900 N. Westwood Ave., P.O. Box 3187, Toledo, Ohio 43607 PHONE (419) 531-4600, FAX (419) 531-6836, www.giantpumps.com Copyright 1998 Giant Industries, Inc. P200A-3100/5100 DIMENSIONS (mm) 3/98 P200A-3100.PM6 GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and...