Genie Z-34, Z-22N - Manuals

4 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing SAFETY RULES Fall Hazards Occupants must wear asafety belt or harness andcomply with applicablegovernmental regulations.Attach lanyard to the anchorprovided in the platform. Do not sit, stand or cli...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 5 Operator's Manual Second Edition • Ninth Printing SAFETY RULES Collision Hazards Be aware of limited sightdistance and blind spotswhen driving or operating. Be aware of boom position when rotating theturntable. The machine must be on a level surfa...

6 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Component Damage Hazard Do not use the machine as a ground for welding. Damaged Machine Hazards Do not use a damaged or malfunctioning machine. Conduct a thorough pre-operation inspection of themach...

8 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Controls Platform Control Panel 1 Drive enable switch 2 Drive enable indicator light 3 Auxiliary power switch 4 Platform level switch 5 Horn button 6 Primary boom extend/retract switch 7 Red Emergen...

10 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a ...

12 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Maintenance Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator. Scheduled maintenance inspections shall be completed by qualified service t...

14 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Function Tests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pre-operat...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 15 Operator's Manual Second Edition • Ninth Printing FUNCTION TESTS Test Auxiliary Controls 11 Turn the key switch to ground control. 12 Simultaneously hold the auxiliary power switch on and activate each boom function toggleswitch. Note: To conserv...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 19 Operator's Manual Second Edition • Ninth Printing Workplace Inspection Workplace Inspection Be aware of and avoid the following hazardoussituations: · drop-offs or holes · bumps, floor obstructions or debris · overhead obstructions and high volta...

20 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pr...

22 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Operation from Platform 1 Turn the key switch to platform control. 2 Pull out both ground and platform red Emergency Stop buttons to the on position. 3 Be sure that both battery packs are connected...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 23 Operator's Manual Second Edition • Ninth Printing Driving on a slope Determine the uphill, downhill and side slope ratingsfor the machine and determine the slope grade. Maximum slope rating,counterweight uphill (gradeability):20% (11°) Maximum sl...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 25 Operator's Manual Second Edition • Ninth Printing Drive Enable Light on indicates that the boom has moved pasteither non-steer wheel and the drive function hasbeen interrupted. To drive, hold the drive enable switch up or downand slowly move the ...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 27 Operator's Manual Second Edition • Ninth Printing Transport & Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is beingl...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 29 Operator's Manual Second Edition • Ninth Printing Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstandthe machine weight. See serial...

30 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Decals Part No. Decal Description Quantity 27564 Danger - Electrocution Hazard 2 28157 Label - Dexron 1 28161 Warning - Crushing Hazard 3 28164 Notice - Hazardous Materials 1 28165 Notice - Foot Sw...

Par t No. 43654 Genie Z-34/22 & Genie Z-34/22N 31 Operator's Manual Second Edition • Ninth Printing DECALS Ground Controls Side PowerUnitSide Shading indicates decalis hidden from view, i.e.,under covers. Platform Chassis

32 Genie Z-34/22 & Genie Z-34/22N Part No. 43654 Operator's Manual Second Edition • Ninth Printing Specifications Z-34/22N Height, working maximum 40 ft 12.2 m Height, platform maximum 34 ft 4 in 10.5 m Height, stowed maximum 6 ft 7 in 2 m Horizontal reach maximum 22 ft 4in 6.8 m Width 4 ft 10 i...