Genie INTELLIG 4024- Manuals

Genie INTELLIG 4024– User Manual in PDF format online.

Manuals:

User Manual

User Manual Genie INTELLIG 4024

Summary

Page 2 - The word; OVERVIEW OF POTENTIAL HAZARDS

©2010 The Genie Company 12/2010 2 SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS CONVENTIONS USED IN THESE INSTRUCTIONS Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since mo...

Page 3 - SAFETY FEATURES; ON; OPENER FEATURES; HomeLink

SAFETY FEATURES Safe-T-Beam® (STB) Non-Contact Reversing System Puts an invisible beam across the door opening. The door stops and reverses to the full open position if anything passes through the beam. LED indicator lights on the powerhead and on the STBs provide a self diagnostic code if an operat...

Page 4 - TABLE OF CONTENTS; Section; Important Installation Instructions; Reference; OPENER MUST BE INSTALLED WITH THE INCLUDED

TABLE OF CONTENTS Section .................................................................................... Page Safety Information .................................................................................................... 2 Opener Features & Safety Features ...........................

Page 5 - Safe-T-Beam® sensors installed and wired; IMPORTANT INSTALLATION INSTRUCTIONS; WARNING: To reduce the risk of severe injury or death:; INFRARED PROTECTION FUNCTION

Begin here after the opener's physical assembly and installation has been completed. There are no assembly or installation steps included in this manual. Contact your Genie® Professional Dealer for an installation poster, if required, or visit www.geniecompany.com to download a PDF file. The followi...

Page 6 - OSE DOOR; open; PR; ontinuing from Installation P; tw

W ARNING • Mak e sur e door w a y is in vie w and clear of obstacles and people to a v oid injur y or damage to pr oper ty . • DO NO T oper a te this unit fr om w all c onsole bef o re LIMIT S and FORCE ar e set . S e v e re damage to the opener can occur . • T he bullet MUST be engaged to carriage ...

Page 7 - VEL LIMIT; SET FORCE

©2010 The Genie Company 12/2010 7 PR OGRAM SE T — SEE long Blue LED flashing 6 W a tch door mo v e RA M SE T — + B) OPEN DOOR TR A VEL LIMIT NOTICE IF DOOR BECOMES OBSTRUCTED I PULL DOWN ON HANDLE DOOR CL OSES DOOR OPENS D o or Limits ar e set. B oth LEDs flash Blue and go OFF . C o ntinue with St e...

Page 8 - ARNING; A mo

©2010 The Genie Company 12/2010 8 1 2 3 4 C ONT A CT RE VERSE TEST T he F o rc e and Limit settings on the pr evious page MUST be C OMPLETED bef o re C o ntac t Rev erse t esting . 1. T est . • Open gar age door using wall c onsole . – Plac e a 2" x 4" boar d (laid flat) under c e nt er of g...

Page 9 - SEE long P

©2010 The Genie Company 12/2010 9 PROGRAM SE T — + PROGRAM SE T — + PR OGR AM INTELLIC ODE® 2 REMO TE T O PO WERHEAD FOR HELP-1-800-35-GENIE OR WWW .GENIEC OMP ANY .C OM 2 PRESS and HOLD SEE BO TH Blue LEDs come ON SEE r ound Blue LED c ome ON SEE long P u rple LED flashing RELEASE 1 2 3 4 5 6 7 T h...

Page 10 - OPTIONAL; button; IntelliC; Homelink®; progr; Homelink®

©2010 The Genie Company 12/2010 10 PROGRAM SE T — + PROGRAM SE T — + PRESS and HOLD SEE BO TH Blue LEDs come ON SEE one Blue LED come ON PRESS and r elease a pr eviously pr ogr ammed G enie® In telliC ode® 2 r emot e butt on on remot e . I f y ou ar e unsur e which r emot e y ou ha v e see page 16. ...

Page 11 - REFERENCE - POWERHEAD & RAIL ASSEMBLED VIEW; RÉFÉRENCE – VUE DE LA TÊTE D’ALIMENTATION & DU RAIL ASSEMBLÉ

Release Handle P oignée de dév err ouillage P alanc a de liber ación PO WER HEAD TÊTE DE PUISSANCE CABEZA DE L A ENER GÍA P o w er C o rd C o rdon de sec teur C able eléc tric o Door A rm Br as de la por te Br azo de la puer ta Header Br ack et Embase suppor t S o por te del tr av esaño Cle vis Pin,...

Page 12 - TYPICAL SECTIONAL DOOR INSTALLATION; INSTALLATION TYPIQUE SUR UNE PORTE SECTIONELLE

©2010 The Genie Company 12/2010 12 NOTICE IF DOOR BE COMES OB STRUCTED I PULL DOW N ON HAND LE TYPICAL SECTIONAL DOOR INSTALLATION FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM INSTALLATION TYPIQUE SUR UNE PORTE SECTIONELLE .................................POUR OBTENIR DE L’AIDE-1-800-35-GENIE INS...

Page 13 - SECTIONAL DOOR; PORTE SECTIONELLE; ONE PIECE DOOR; PORTE D’UNE PIÈCE; LIFT SPRING; RESSORT DE LEVAGE; TYPICAL ONE PIECE DOOR INSTALLATION; INSTALLATION TYPIQUE D’UNE PORTE DE GARAGE D’UNE PIÈCE; WARNING; ADVERTENCIA; HEADER BRACKET MOUNTING BOARD (not provided); ESCUADRA DE SOPORTE TÍPICA (NO SE INCLUYE)

©2010 The Genie Company 12/2010 13 SECTIONAL DOOR PORTE SECTIONELLE PUERTA SECCIONAL ONE PIECE DOOR PORTE D’UNE PIÈCE PUERTA DE UNA SOLA PIEZA IF DOOR BE COMES OB STRUCTED I PULL DOW N ON HAND LE LIFT SPRING RESSORT DE LEVAGE RESORTE DE ELEVACIÓN *If required direct wiring of power supply to opener ...

Page 14 - OVERVIEW OF POWERHEAD CONTROLS; flashing; Name Shape

©2010 The Genie Company 12/2010 14 SET PROGRAM Open Travel Button ROUND LED Indicator (Light) Facing Garage Door LONG LED Indicator (Light) Close Travel Button OVERVIEW OF POWERHEAD CONTROLS This section describes the simple programming functions. Use this page to familiarize yourself with the butto...

Page 15 - OVERVIEW - REMOTES AND OPTIONS; FCC and IC CERTIFIED; A moving door can cause serious injury or death.; LOST OR STOLEN REMOTE - CLEARING MEMORY; BLUE; PURPLE; Your door opener will no longer

©2010 The Genie Company 12/2010 15 OVERVIEW - REMOTES AND OPTIONS 5 FCC and IC CERTIFIED This device complies with FCC Part 15 and RSS 210 of Industry Canada. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These ...

Page 16 - Three button; ATTENTION

©2010 The Genie Company 12/2010 16 3. Press the same button twice to toggle IntelliCode® selection from IntelliCode® 2 to IntelliCode® 1. INTELLICODE® FEATURES Other models of Genie® garage door openers, remotes, and wireless keypads use IntelliCode® 1 signals to communicate. Remote(s) provided with...

Page 17 - MAINTENANCE & TROUBLESHOOTING; TRANSMITTER COMPLIANCE STATEMENT; IMPORTANT SAFETY INSTRUCTIONS; READ AND FOLLOW ALL INSTRUCTIONS.; ONE SHOULD CROSS THE PATH OF THE MOVING DOOR.; SAVE THESE INSTRUCTIONS.

©2010 The Genie Company 12/2010 17 MAINTENANCE & TROUBLESHOOTING FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM 6 If you have any questions, please do not hesitate to contact customer service at: 1-800-35-GENIE TRANSMITTER COMPLIANCE STATEMENT Transmitters comply with all United States and Cana...

Page 18 - ROUTINE MONTHLY MAINTENANCE; Sectional Door; STB

• With the door closed, pull release handle DOWN and let go to release door carriage assembly from drive system. • Raise door manually approximately 3’- 4’ and release.– Door should remain stationary or move very slightly. – If door moves quickly, CONTACT A TRAINED DOOR SYSTEM TECHNICIAN . • Close t...

Page 19 - DOOR; TO RELEASE or RECONNECT CARRIAGE,; DOOR; CARRIAGE ENGAGE/DISENGAGE; below; console

NOTICE IF DOOR BE COMES OB STRUCTED PULL DOW N ON HAND LE TO RELEASE CARRIAGE: 1. Pull handle DOWN then let go. 2. Manually move door until carriage releases from bullet. 3. Raise or lower door manually. DOOR PULL TO RECONNECT CARRIAGE: 1. Verify RED block is in the UP position. 2. Manually move doo...

Page 20 - Note; optional second; OR

©2010 The Genie Company 12/2010 20 Independent Light Control Button Controls door opener lights from inside garage Sure-Lock™ Button – LOCK disables controls after door is completely closed – UNLOCK allows controls to work normally Indicator Light Red indicator light is always ON When Sure-Lock™ is ...

Page 21 - CHAIN OR BELT - TENSION ADJUSTMENT; increase; BELT; REMOTE BATTERY REPLACEMENT

CHAIN OR BELT - TENSION ADJUSTMENT WARNING • Observe all safety warning and precautions!• Disconnect power from opener and disconnect carriage in rail from bullet before beginning this task. Visually inspect the chain or belt every 6 months. NOTE: Tension adjustments should be made with the door in ...

Page 22 - SPEED SETTINGS; CHANGE SPEED SETTING; Speed Level

©2010 The Genie Company 12/2010 22 ADJUSTMENT GUIDE - SPEED SETTINGS FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM Speed settings are pre-programmed at the factory for the maximum speed. Speed settings should not need adjustment with this unit.However, travel speed for the opener in both the open ...

Page 23 - ADJUSTMENT GUIDE; Force Level; current; CAUTION; normal

©2010 The Genie Company 12/2010 23 ADJUSTMENT GUIDE - FORCE SETTINGS FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM Force settings are pre-programmed at the factory and "learned" during the Open/Close Limit settings steps. Some additional Force may be increased. For normal use, Force settin...

Page 24 - • Check power source,; closing; TROUBLESHOOTING GUIDE -

PROBLEM WHAT TO DO Opener does NOT run from wall console. • Check power source, – Plug a lamp into outlet used for powerhead. If lamp works, power source is OK.– If not, check fuse or circuit breaker. • If power is OK, – Check connections at powerhead terminals and at wall console.– Limits must be s...

Page 25 - lowest speed setting.; Powerhead LED

PROBLEM WHAT TO DO Noisy operation. • Be sure all door fasteners are tight.• Be sure garage door is in good repair, properly lubricated and balanced.• Be sure opener is in good repair. Door opener runs slow. • Check operating condition of door. See pages 18. Door may need professional repair/ adjust...

Page 26 - REFERENCE - CIRCUIT WIRING DIAGRAM; RÉFÉRENCE - DIAGRAMME DE CÂBLAGE DE CIRCUIT; Opening Cover May Cause Electric Shock.; L’ouverture du couvercle peut entraîner des chocs électriques.; Disconnect power from opener prior to removing cover.; POWER CORD; CORDON DE SECTEUR; AVERTISSEMENT; ELECTRICAL SHOCK; CHOC ÉLECTRIQUE

©2010 The Genie Company 12/2010 26 REFERENCE - CIRCUIT WIRING DIAGRAM FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM RÉFÉRENCE - DIAGRAMME DE CÂBLAGE DE CIRCUIT ........................................................POUR OBTENIR DE L’AIDE-1-800-35-GENIE REFERENCIA - ESQUEMA ELÉCTRICO DEL CIRCUITO ...

Page 27 - Intelli

GMI Holdings, Inc. d/b/a The Genie Company ("Seller") warrants to the original purchaser of the below identified garage door opener, IntelliG ™ 1200 (Model 4024 and 4024H) (“Product”), subject to all of the terms and conditions hereof, that the Product and all components thereof will be free...

Genie Manuals

Genie 37000U User Manual
Genie 2024 User Manual
Genie 2562 User Manual
Genie 2562 Installation Manual
Genie 2562 Manual
Genie 36255W User Manual
Genie 2022 User Manual
Genie 2564 User Manual
Genie 2564 Installation Manual
Genie 2042 User Manual
Genie 1024 User Manual
Genie 1022 User Manual
Genie 1042 User Manual
Genie ISL980 User Manual
Genie 4560 User Manual
Genie 4560 Installation Manual
Genie PMX700 User Manual
Genie GPS700-IC User Manual
Genie IS920 User Manual
Genie 36280R User Manual