Page 2 - English; Operator’s Manual GSHD1290; SPECIFICATIONS; To reduce the risk of injury, user must read and understand this; The Operation of any power tool can result in foreign; GENErAL SAFETY rULES; read and understand all warnings, cautions and operating; SAVE THESE INSTRUCTIONS; WORK AREA SAFETY; Do not operate power tools in explosive atmospheres
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 SPECIFICATIONS • Model: ------------------------ GSHD1290• Rated Power: ----------------- 120V~/60Hz, 9.0 Amp• No Load Speed: -------------- 0-850 RPM• Chuck: ------------------------ 1/2” (13mm) Keyed• Cord Length: ------------...
Page 3 - ELECTRICAL SAFETY; enables better; TOOL USE AND CARE
3 English ELECTRICAL SAFETY • Power tool plugs must match the outlet . Never modify the plug in any way. Do not use any adaptor plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarize...
Page 4 - USE OF THIS TOOL CAN GENErATE AND DISBUrSE DUST Or; SERVICE; only identical; EXTENSION COrDS; Grounded tools require a three wire extension cord
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 • Turn power tool off, and disconnect the plug from the power source and/or battery pack from the power tool before making any adjustments, changing the accessories, or storing the tools . Such preventive safety measures reduce ...
Page 5 - SPECIFIC SAFETY rULES FOr ELECTrIC DrILLS; DO NOT LET COMFOrT Or FAMILIArITY WITH PrODUCT (GAINED; Always use safety glasses or goggles
5 English • Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. • Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. SPECIFIC SAFETY rUL...
Page 6 - Do not use dull or damaged bits and accessories; Do not use bits larger then those recommended; switching the tool “ON”
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 • Do not use dull or damaged bits and accessories . Dull or damaged bits are more likely to bind in the work piece. • Do not use bits larger then those recommended . They are more likely to jam, causing loss of tool control and ...
Page 7 - SYMBOLS; Hz
7 English SYMBOLS Some of the following symbols may appear on this product. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this product. SYMBOL DESCRIPTION SYMBOL DESCRIPTION V Volts or A.C. Alternating current...
Page 8 - KNOWING YOUr ELECTrIC DrILL; CONTENTS IN PACKAGE; Description
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 KNOWING YOUr ELECTrIC DrILL UNPACKING AND CONTENTS IMPOrTANT: Due to modern mass production techniques, it is unlikely the tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the p...
Page 9 - OPErATION; Always check that the power supply corresponds to the voltage; TRIGGER SWITCH; Do not change the direction of rotation until the tool comes to a
9 English OPErATION WArNING: Always check that the power supply corresponds to the voltage on the rating name plate. WArNING: Always be sure that the tool is switched off and unplugged before adjusting, adding accessories, or checking a function on the tool. TRIGGER SWITCH Your tool is equipped with...
Page 10 - INSTALLING AND REMOVING BITS; To Install a Drill Bit:; APPLICATION; GENERAL DRILLING
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 INSTALLING AND REMOVING BITS Inspect the drill bit shank and the drill’s chuck jaws for dirt or foreign matter and clean them if necessary. Dirt on the drill bit shank or on the chuck jaws can cause misalignment or bit slippage ...
Page 11 - DRILLING IN WOOD, COMPOSITE MATERIALS AND PLASTICS; To Drill the Hole; NOTE; DRILLING IN METAL; DO NOT FOrCE the tool. Too much pressure may cause bits
11 English 6. Just before the bit penetrates the back side of the workpiece, reduce splintering in wood and jamming in metal by reducing pressure on the drill. 7. When the bit completely penetrates the work and is spinning freely, withdraw it from the workpiece with the drill motor still running and...
Page 12 - MAINTENANCE; CLEANING; Do not at any time let brake fluids, gasoline, petroleum-based; LUBRICATION
English 1/2" Spade-Handle Electric Drill Operator’s Manual GSHD1290 MAINTENANCE CLEANING Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. use clean cloths to remove dirt, dust, oil...
