GE FTP-1000- Manuals

Page 3 - Preface; how to install the touchpad and; Conventions used in this document; The following conventions are used in this document:; Safety terms and symbols; These terms may appear in this manual:

1 Preface This is the GE FTP-1000 Installation Manual for model 600-1020. This document includes an overview of the product and detailed instructions explaining: • how to install the touchpad; and • how to program the touchpad. There is also information describing how to contact technical support if...

Page 4 - Product overview; Table 4; Tools and equipment needed; Screwdriver

FTP-1000 Installation Manual 2 Product overview The FTP-1000 lets you control the operation of compatible security systems (see Table 4 on page 10). The large display provides easy to read messages to indicate the current status of the system. The touchpad includes police, fire, and auxiliary panic ...

Page 5 - Installation; Use the following instructions to install and wire your touchpad.; Guidelines; Table 1; Mounting plate installation; To install the mounting plate, do the following:

3 Installation Use the following instructions to install and wire your touchpad. Guidelines • Mount the touchpad in an environmentally controlled area (32 to 120°F or 0 to 49°C). • When mounting the touchpad, allow at least 3 inches below it for the swing-down cover. • Do not exceed the maximum avai...

Page 6 - Figure 2; Wiring the touchpad to the panel; To wire the touchpad to the panel, do the following:

FTP-1000 Installation Manual 4 2. For wall mounting, place the mounting plate on the wall and mark the mounting holes (see Figure 2 ). Be sure to leave a 3-inch clearance below for the touchpad door to open. F igure 2. Mounting hole locations 3. Insert anchors into the wall at the marked locations w...

Page 7 - Attaching the touchpad to the mounting plate; To power up the panel and verify bus communication:; then show a time display with the

5 F igure 3. Touchpad wiring connections Attaching the touchpad to the mounting plate Align the tabs at the top of the mounting plate with the slots on the touchpad and swing the touchpad bottom toward the mounting plate. Gently tighten the screw into the bottom of the touchpad. Power-up and bus com...

Page 8 - Testing; Test touchpad display function

FTP-1000 Installation Manual 6 Testing Use the following procedures to test the touchpad for display function, button function, and system operation. Test touchpad display function Press and hold the 4 , 5 , and 6 buttons together for about three seconds, then release them. The touchpad cycles thoug...

Page 9 - Adjusting display brightness; Adjust display background brightness

7 Adjusting display brightness You can adjust the background lighting (provided by yellow LEDs) of each touchpad individually to help compensate for lighting conditions at the touchpad location. The brightness adjustment lightens or darkens the display background and button lighting. Adjust display ...

Page 10 - Changing chime and trouble beep tones; Change status tone pitch; To change the status tone pitch, do the following:

FTP-1000 Installation Manual 8 Changing chime and trouble beep tones The frequency (pitch) of chime and trouble beep tones from each touchpad can be adjusted to a more desirable or distinct tone, and to compensate for hearing impaired persons. Note: Chime and trouble beep tones sound (using the defa...

Page 11 - Troubleshooting; the transformer to an unswitched outlet location, if necessary.; Contacting technical support; Online publication library; In the; Tools; area at the top, click the

9 Troubleshooting The following describes what to do if the touchpad does not operate correctly. • The touchpad doesn’t power up (no display and no beeps when buttons are pressed). 1. Check for correct wiring connections at touchpad and panel terminals. 2. Make sure that the panel battery is connect...

Page 12 - Appendix A; Radio interferance information to the user; Reorient or relocate the receiving antenna.

FTP-1000 Installation Manual 10 Appendix A Specif ications and notices Note: See specific panel installation instructions for complete UL installation requirements for the system you are installing. Radio interferance information to the user If this equipment causes harmful interferance to radio or ...