3 Specific Safety Instructions WARNINGS Do not use the heater in areas where there is a risk of explosion or fi re from fl ammable gases. Ensure that the heating area is kept clear of combustible materials. Do not use the heater in damp areas, without suitable ventilation. This heater is not designe...
Page 4 - Electrical Data; IMPORTANT; Assembly; HEATER HEAD
4 Electrical Data IMPORTANT This product is fi tted with a sealed electrical connection plug that is compatible with the heater, the mains supply for Australia and meets the requirements of international standards. This heater must be connected to a supply voltage that is equal to that stated on the...
Page 5 - Mounting Heater; General Mounting Suggestions
5 Mounting Heater General Mounting Suggestions If unsure please discuss with your local hardware store. • Ensure the fi xing screws are at least suitable for 10Kg each.• If fi tting to a stud wall or ceiling ensure all fi xing screws are into timber. Plasterboard IS NOT suitable by itself. • If no t...
Page 7 - Heater Positioning
7 Heater Positioning 1. Position heater at least 200mm from the eave lining or ceiling or wall at 90˚ to heater. 2. Position heater at least 1.8m above the fl oor.3. Never position in front, above or below a power point. 4. If heater is facing another vertical surface, example – wall, the gap must b...
Page 8 - Do not return to place of purchase.; For any queries or assistance call; Customer Service; Keep your purchase receipt, this will be required to; To Operate; TO OPERATE USING REMOTE; Cleaning
8 Do not return to place of purchase. For any queries or assistance call Customer Service (Australia Only) 1300 174 876 Hours of operation: Monday to Friday 8.30am - 5.30pm EST Keep your purchase receipt, this will be required to make any claims under the 12 month warranty. Gasmate® is a registered ...