Garmin STYLUS PRO PRO WT7900- Manuals

Page 2 - Printer Parts; Front

Printer Parts Front Back 1 Film basket Roll paper holder Front cover Ink bay Roll paper cover Control panel Ink bay Casters Manual holder Paper basket Film basket guide Optional SpectroProofer port USB port Maintenance tank Network interface port AC inlet

Page 3 - Loading Epson Media

Loading Epson Media 1 Open the roll paper cover. 2 Push the lock lever down firmly, then move the roll paper holder to the left. 3 Set the roll paper on top of the printer. 4 If necessary, adjust the roll paper adapters to fit the core size of the roll paper. Then release the tension lever on each a...

Page 4 - Removing Epson Media; Grasp the left roll paper holder and slide it to the

3 5 Roll the paper forward so it rests on top of the printer. 6 Pull up the tension levers, then remove the adapters from the paper roll. 7 Place the roll in its original package. Removing Epson Media 9 Grasp the left roll paper holder and slide it to the right as far as it will go. Make sure the ro...

Page 5 - Shaking the White Ink Cartridge; Checking the Nozzles

4 To maintain optimal image quality, remove the white ink cartridge and shake it once a week. The printer will tell you when this is required: Alert that shaking is required Days until next required shaking 1 Press the button to unlock the ink bay. Press to select OPEN LEFT COVER , then press OK . 2...

Page 6 - Checking and Cleaning the Print Head (continued); Aligning the Print Head

Checking and Cleaning the Print Head (continued) Cleaning the Nozzles1 Press the cleaning button on the control panel. 2 Press or to select one of the following: • NORMAL CLEANING —Press OK to start the cleaning cycle. • CLEAN COLOR PAIRS —Press OK , select the color pair you want to clean, then pre...

Page 7 - Checking Ink Levels and Replacing Ink Cartridges

Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job. Checking Ink and Maintenance Tank Levels The easiest way to check ink...

Page 8 - Checking Ink Levels and Replacing Ink Cartridges (continued); Replacing the Paper Cutter

5 Make sure the replacement cartridge is the correct color, and remove it from its package. Gently shake the cartridge before installing it: 30 seconds for the white ink cartridge, or 5 seconds for all others. 6 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cart...

Page 9 - Replacing the Maintenance Tank

Replacing Printer Parts (continued) 8 9 Tighten the screw. 10 Insert the cutter cover, then press it in until it snaps into place. 11 Turn the printer back on. 12 Run the cutter adjustment from the Maintenance menu using the control panel. Replacing the Maintenance Tank You need to replace the maint...

Page 12 - Where To Get Help

Where To Get Help Service Access Telephone support Call (888) 377-6611. Make sure you have your Unit ID number. If you experience any difficulty with the toll-free number or your Unit ID number, call (562) 276-1305. Internet Go to epson.com/support to download drivers and firmware, access product do...

Page 13 - Control Panel Lights and Buttons

Eps on Sty lus ® Pr o W T79 00 QUICK REF ERENCE GUIDE Printed in USA CPD-2 7917 Control Panel Lights and Buttons Menu button Paper feed button (down) Paper source button Pause/reset lightand button Power light and button Paper feed button (up) OK button Paper light Ink light Head cleaning button Pap...