Page 7 - RECORD OF REVISIONS; Part Number
Garmin G1000 Cockpit Reference Guide for the DA42 RR-1 RECORD OF REVISIONS Part Number Change Summary 190-00406-01 Added DME capabilityAdded BRG1/BRG2 pointersChanged Airspeed Trend VectorChanged Altitude Trend VectorAdded Checklist capabilityAdded Flight ID capability 190-00406-02 Reformatted manua...
Page 9 - TABLE OF CONTENTS; SECTION 1: SYSTEM OVERVIEW
Garmin G1000 Cockpit Reference Guide for the DA42 i TABLE OF CONTENTS SECTION 1: SYSTEM OVERVIEW .................................... 1-1 1.1 PFD/MFD Controls ................................................... 1-2 1.2 PFD Softkeys ............................................................ 1-4 1.3...
Page 10 - SECTION 8: FLIGHT PLANNING; SECTION 9: PROCEDURES
Garmin G1000 Cockpit Reference Guide for the DA42 ii TABLE OF CONTENTS 7.6 VOR Information ..................................................... 7-5 Select the VOR Information Page ................................. 7-5 Access Information on a VOR .................................. 7-5 7.7 User Waypo...
Page 11 - SECTION 11: ABNORMAL OPERATION
Garmin G1000 Cockpit Reference Guide for the DA42 iii TABLE OF CONTENTS 10.3 XM Weather (Optional) ............................................ 10-3 Displaying METAR and TAF information on the Airport Information Page ........................................... 10-3Displaying Weather on the Weather ...
Page 13 - SECTION 1; The purpose of this Cockpit Reference Guide is to; The pilot should read and thoroughly
Garmin G1000 Cockpit Reference Guide for the DA42 1-1 SECTION 1 SYSTEM OVERVIEW 1-1 SECTION 1: SYSTEM OVERVIEW The purpose of this Cockpit Reference Guide is to provide the pilot a resource with which to find operating instructions on the major features of the G1000 system more easily. It is not inte...
Page 16 - Softkey OFF; INSET
Garmin G1000 Cockpit Reference Guide for the DA42 1-4 SECTION 1 SYSTEM OVERVIEW 1.2 PFD SOFTKEYS Softkey OFF Softkey ON OBS TMR/REF NRST INSET IDENT XPDR CDI PFD ALERTS ADF/DME (optional) Figure 1-2 PFD Top Level Softkeys INSET – Press to display the Inset Map in the lower left corner of the PFD. OF...
Page 17 - OBS; Figure 1-3 PFD Softkey Flow Chart – 1
Garmin G1000 Cockpit Reference Guide for the DA42 1-5 SECTION 1 SYSTEM OVERVIEW OBS – Press to select OBS mode on the CDI when navigating by GPS (only available with active leg). CDI – Press to change navigation mode on the CDI between GPS, VOR1, and VOR2. ADF/DME (optional) – Press to display the A...
Page 18 - Figure 1-5 PFD Softkey Flow Chart – 3
Garmin G1000 Cockpit Reference Guide for the DA42 1-6 SECTION 1 SYSTEM OVERVIEW Figure 1-5 PFD Softkey Flow Chart – 3 IDENT – Press to provide special aircraft position identification to Air Traffic Control (ATC). TMR/REF – Press to display the Timer/References Window. NRST – Press to display the Near...
Page 19 - BACK; Figure 1-6 MFD Softkeys
Garmin G1000 Cockpit Reference Guide for the DA42 1-7 SECTION 1 SYSTEM OVERVIEW BACK – Pressing this softkey displays the ENGINE and MAP top level softkeys. DCLTR (declutter) – Pressing this softkey removes map information in three levels. Figure 1-6 MFD Softkeys MAP DCLTR TRAFFIC TOPO TERRAIN DCLTR...
Page 20 - Figure 1-7 Page Group Icon
Garmin G1000 Cockpit Reference Guide for the DA42 1-8 SECTION 1 SYSTEM OVERVIEW 1.4 MFD PAGE GROUPS 1) Turn the large FMS Knob until the desired page group is selected. 2) Turn the small FMS Knob to select pages within the group. See Figure 1-7. Figure 1-7 Page Group Icon Map Page Group Waypoint Pag...
Page 21 - SECTION 2; SECTION 2: FLIGHT INSTRUMENTS; Figure 2-1 Default PFD Information
Garmin G1000 Cockpit Reference Guide for the DA42 2-1 SECTION 2 FLIGHT INSTRUMENTS SECTION 2: FLIGHT INSTRUMENTS The following discussions pertain to the Primary Flight Display, unless otherwise indicated. 6 7 11 14 15 8 13 12 5 3 4 2 1 16 Figure 2-1 Default PFD Information 14 15 11 13 12 9 6 4 2 5 ...
Page 22 - Figure 2-2 Additional PFD Information
Garmin G1000 Cockpit Reference Guide for the DA42 2-2 SECTION 2 FLIGHT INSTRUMENTS Figure 2-2 Additional PFD Information 4 7 8 9 1 3 6 2 11 Traffic Annunciation 2 4 3 1 8 9 Inset Map Selected Course Box Annunciation Window 7 Alerts Window Vertical Deviation/Glideslope Indicator Marker Beacon Annuncia...
Page 23 - AIRSPEED INDICATOR; Figure 2-4 Airspeed Indicator; Speed Indication; Figure 2-5 Red Pointer at Vne; Speed Ranges; ON; ATTITUDE INDICATOR; Figure 2-6 Attitude Indicator
Garmin G1000 Cockpit Reference Guide for the DA42 2-3 SECTION 2 FLIGHT INSTRUMENTS 2.1 AIRSPEED INDICATOR Figure 2-4 Airspeed Indicator Actual Airspeed Airspeed Trend Vector True Airspeed Box Vspeed References Speed Ranges Vyse (Blue Line) Vmc (Red Line) Speed Indication The indicated airspeed is di...
Page 24 - Figure 2-7 Altimeter; Altitude Reference Bug; To set the altitude reference bug:; Altitude Trend Vector; BARO; Altitude Alerting; Figure 2-8 Altitude Alerting Visual Annunciations; INDICATOR; Figure 2-9 Marker Beacon and Vertical Deviation
Garmin G1000 Cockpit Reference Guide for the DA42 2-4 SECTION 2 FLIGHT INSTRUMENTS 2.3 ALTIMETER Altitude Reference Box Altitude Trend Vector Current Altitude Barometric Setting Box Figure 2-7 Altimeter Altitude Reference Bug Altitude Reference Bug The Altitude Reference Bug can be set to any desire...
Page 25 - VERTICAL SPEED INDICATOR; Figure 2-10 Vertical Speed Indicator; HORIZONTAL SITUATION INDICATOR; PFD; Figure 2-11 Horizontal Situation Indicator
Garmin G1000 Cockpit Reference Guide for the DA42 2-5 SECTION 2 FLIGHT INSTRUMENTS 2.6 VERTICAL SPEED INDICATOR Figure 2-10 Vertical Speed Indicator Vertical Speed Pointer The actual vertical speed is displayed inside the pointer. 2.7 HORIZONTAL SITUATION INDICATOR (HSI) The HSI compass can be displ...
Page 26 - Figure 2-13 Standard-Rate Turn Indication; Course Pointer; Figure 2-14 Arc CDI and Compass Rose CDI; Bearing Pointers and Information Windows; Figure 2-15 HSI with Bearing Information
Garmin G1000 Cockpit Reference Guide for the DA42 2-6 SECTION 2 FLIGHT INSTRUMENTS Turn Rate Indicator and Heading Trend Vector Tick marks to the left and right of the lubber line denote half-standard and standard turn rates. A magenta turn rate trend vector shows the current turn rate. The end of t...
Page 27 - Figure 2-16 BRG1 Information Window; To display the DME Information Window, press the; Figure 2-18 DME Information Window; Navigation Source; • INTEG – GPS information is either not present or; The; Softkey is only displayed when
Garmin G1000 Cockpit Reference Guide for the DA42 2-7 SECTION 2 FLIGHT INSTRUMENTS Distance to Bearing Source Waypoint Identifier Bearing Source Pointer Icon Figure 2-16 BRG1 Information Window Distance to Bearing Source Waypoint Identifier Pointer Icon Bearing Source Figure 2-17 BRG2 Information Wind...
Page 29 - SECTION 3 – ENGINE; SECTION 3: ENGINE INDICATION; ENGINE; Figure 3-1 ENGINE Display; ENGINE SYSTEM DISPLAY; Figure 3-2 SYSTEM Display
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 3 – ENGINE INDICATION SYSTEM (EIS) 3-1 SECTION 3: ENGINE INDICATION SYSTEM (EIS) 3.1 ENGINE DISPLAY In all cases green indicates normal operation, yellow indicates caution, and red indicates warning. Pressing the ENGINE Softkey makes availabl...
Page 30 - Figure 3-3 FUEL Display; If desired, use the; Fuel calculations do not use the aircraft
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 3 – ENGINE INDICATION SYSTEM (EIS) 3-2 Figure 3-3 FUEL Display Engine Load Indicator Tachometer Fuel Temperature Indicator Gallons Remaining Endurance Fuel Flow Indicator Gallons Used Fuel Quantity Indicator Range in Nautical Miles Total Time...
Page 31 - TRANSPONDER; The Nav/Com controls and frequency boxes are located
Garmin G1000 Cockpit Reference Guide for the DA42 4-1 SECTION 4 – NAV/COM & TRANSPONDER SECTION 4: NAV/COM AND TRANSPONDER The Nav/Com controls and frequency boxes are located on the Primary Flight Display and the Multi-Function Display in the same locations. NAV Controls COM Controls NAV Freque...
Page 32 - Figure 4-2 Frequency Fields
Garmin G1000 Cockpit Reference Guide for the DA42 4-2 SECTION 4 – NAV/COM & TRANSPONDER Standby NAV Frequency Field Active NAV Frequency Field Active COM Frequency Field Standby COM Frequency Field Figure 4-2 Frequency Fields Selected NAV Frequency Tuning Box Tuning Box Selected COM Frequency Fr...
Page 33 - RADIO STATUS INDICATIONS; Figure 4-5 Radio Status Indications; AUTOMATIC SQUELCH; COM; OPTIONAL NAV RADIOS
Garmin G1000 Cockpit Reference Guide for the DA42 4-3 SECTION 4 – NAV/COM & TRANSPONDER 4.1 RADIO STATUS INDICATIONS • RX – When a COM signal is received, a white ‘RX’ appears by the active COM frequency during signal reception. • TX – When a COM radio is transmitting, a white ‘TX’ indication ap...
Page 34 - DME; Figure 4-8 Radio Tuning Window; Auto-tuning on the PFD; FMS
Garmin G1000 Cockpit Reference Guide for the DA42 4-4 SECTION 4 – NAV/COM & TRANSPONDER DME Radio (optional) The tuning window is displayed by pressing the ADF/ DME Softkey (if no ADF is installed, the softkey will be labeled DME ). Figure 4-8 Radio Tuning Window To change the DME tuning source:...
Page 35 - STBY; Figure 4-11 Ground Mode; Reply Status; Figure 4-12 Reply Indication; Code Selection; Flight ID Reporting
Garmin G1000 Cockpit Reference Guide for the DA42 4-5 SECTION 4 – NAV/COM & TRANSPONDER 4.7 TRANSPONDER Mode Selection The STBY , ON and ALT Softkeys can be accessed by pressing the XPDR Softkey. Ground Mode (Automatic) GND is displayed when the aircraft is on the ground. Figure 4-11 Ground Mode...
Page 37 - SECTION 5 – AUDIO PANEL; SECTION 5: AUDIO PANEL; Figure 5-1 Audio Panel Controls
Garmin G1000 Cockpit Reference Guide for the DA42 5-1 SECTION 5 – AUDIO PANEL SECTION 5: AUDIO PANEL Transmitters (COM3 MIC is unavailable) Transceiver Audio (COM 3 is unavailable) Split COM (Not recommended on the DA42) Telephone (Unavailable) Marker Beacon/Mute Passenger Address Marker Beacon Sign...
Page 38 - COM RADIO SELECTION; Figure 5-2 Transceivers; RECOMMENDED ON THE DA42); NOTE; Split COM performance is affected by; Figure 5-3 Split COM Function; MARKER BEACON RECEIVER; Figure 5-4 Marker Beacon Signal Indicator Lights on the PFD
Garmin G1000 Cockpit Reference Guide for the DA42 5-2 SECTION 5 – AUDIO PANEL 5.1 COM RADIO SELECTION Pressing the COM1 MIC or COM2 MIC Key selects the active transmitter (i.e., microphone). The associated receiver audio ( COM1 or COM2 ) also becomes selected when the COM MIC Key is pressed. To prev...
Page 39 - HI SENS; Figure 5-5 Marker Beacon; NAV RADIO AUDIO SELECTION; Table 5-1 ICS Isolation Modes; PILOT; Figure 5-7 ICS Isolation
Garmin G1000 Cockpit Reference Guide for the DA42 5-3 SECTION 5 – AUDIO PANEL Marker Beacon Signal Sensitivity The HI SENS Key can be pressed for increased marker beacon signal sensitivity. Figure 5-5 Marker Beacon 5.4 NAV RADIO AUDIO SELECTION Pressing DME , ADF , NAV1 , or NAV2 selects and deselec...
Page 40 - INTERCOM SQUELCH CONTROL
Garmin G1000 Cockpit Reference Guide for the DA42 5-4 SECTION 5 – AUDIO PANEL 5.6 INTERCOM SQUELCH CONTROL Select manual squelch for intercom audio by pressing the MAN SQ Key to light the annunciator. Pressing the small VOL/SQ Knob now toggles between volume and squelch adjustment by lighting VOL or...
Page 41 - SECTION 6 – AUTOMATIC; UTOMATIC FLIGHT; Refer to the pilot’s guide for the installed autopilot
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 6 – AUTOMATIC FLIGHT CONTROL 6-1 SECTION 6: A UTOMATIC FLIGHT CONTROL Refer to the pilot’s guide for the installed autopilot system.
Page 43 - SECTION 7 – NAVIGATION; SECTION 7: NAVIGATION; The following discussions pertain to the Multi Function; NAVIGATION MAP PAGE; Select the MAP Page Group; The map display should only be; Direct-to Navigation from the MFD
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-1 SECTION 7: NAVIGATION The following discussions pertain to the Multi Function Display, unless otherwise indicated. 7.1 NAVIGATION MAP PAGE Select the MAP Page Group 1) Turn the large FMS Knob until ‘ MAP’ is highlighted in ...
Page 44 - Figure 7-3 Canceling Direct-to Navigation; Direct-to Navigation from the PFD
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-2 3) Turn the small FMS Knob to display a list of waypoints or airports. 4) Continue turning the small FMS Knob to scroll through the list and highlight the desired waypoint or airport. 5) Press the ENT Key to confirm the sele...
Page 45 - AIRPORT INFORMATION; Figure 7-5 Airport Information Page; Select the Airport Information Page
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-3 7.3 AIRPORT INFORMATION Figure 7-5 Airport Information Page Select the Airport Information Page 1) Turn the large FMS Knob to select the ‘WPT’ page group. 2) Turn the small FMS Knob to select the first rectangular page icon....
Page 46 - INTERSECTION INFORMATION; Select the Intersection Information Page; Figure 7-6 Intersection Information Page; Select the NDB Information Page
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-4 7.4 INTERSECTION INFORMATION Select the Intersection Information Page 1) Turn the large FMS Knob to select the ‘WPT’ page group. 2) Turn the small FMS Knob to select the second rectangular page icon. Figure 7-6 Intersection...
Page 47 - Figure 7-8 VOR Information Page; Select the VOR Information Page; USER WAYPOINT INFORMATION; See the Flight Planning section for a discussion on; NEAREST AIRPORTS; Figure 7-9 Nearest Airports Page; Nearest Airport Information on the MFD
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-5 7.6 VOR INFORMATION Figure 7-8 VOR Information Page Select the VOR Information Page 1) Turn the large FMS Knob to select the ‘WPT’ page group. 2) Turn the small FMS Knob to select the fourth rectangular page icon. Access In...
Page 49 - NEAREST INTERSECTIONS; Figure 7-11 Nearest Intersections Page; Select the Nearest Intersections Page; Figure 7-12 Nearest NDB Page; Select the Nearest NDB Page
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-7 7.9 NEAREST INTERSECTIONS Figure 7-11 Nearest Intersections Page Select the Nearest Intersections Page 1) Turn the large FMS Knob to select the ‘NRST’ page group. 2) Turn the small FMS Knob to select the second rectangular ...
Page 50 - Figure 7-13 Nearest VOR Page; NEAREST USER WAYPOINT; Figure 7-14 Nearest User Waypoints Page; Select the Nearest User Waypoint Page
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-8 7.11 NEAREST VOR Select the Nearest VOR Page 1) Turn the large FMS Knob to select the ‘NRST’ page group. 2) Turn the small FMS Knob to select the fourth rectangular page icon. Figure 7-13 Nearest VOR Page View Information o...
Page 51 - NEAREST FREQUENCIES; Figure 7-15 Nearest Frequencies Page; Select the Nearest Frequencies Page; NEAREST AIRSPACES; Figure 7-16 Nearest Airspaces Page; Select the Nearest Airspaces Page; • If the projected course takes the aircraft inside an
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 7 – NAVIGATION 7-9 3) Press the FMS Knob to remove the flashing cursor. 7.13 NEAREST FREQUENCIES Figure 7-15 Nearest Frequencies Page Select the Nearest Frequencies Page 1) Turn the large FMS Knob to select the ‘NRST’ page group. 2) Turn the s...
Page 53 - SECTION 8 – FLIGHT PLANNING; USER DEFINED WAYPOINTS; Figure 8-1 User WPT Information Page; Select the User WPT Information Page
Garmin G1000 Cockpit Reference Guide for the DA42 8-1 SECTION 8 – FLIGHT PLANNING SECTION 8: FLIGHT PLANNING The following discussions pertain to the Multi Function Display, unless otherwise indicated. 8.1 USER DEFINED WAYPOINTS Figure 8-1 User WPT Information Page Select the User WPT Information Pa...
Page 54 - VIEWING THE ACTIVE FLIGHT PLAN; Figure 8-2 Active Flight Plan Window on the PFD; ACTIVATE A STORED FLIGHT PLAN; Figure 8-4 Flight Plan Catalog Page
Garmin G1000 Cockpit Reference Guide for the DA42 8-2 SECTION 8 – FLIGHT PLANNING Create User Waypoints from the Navigation Map Page 1) With the Navigation Map Page displayed, push the Joystick to activate the panning function. The map pointer is displayed at the present aircraft position. 2) Move t...
Page 55 - ACTIVATE A FLIGHT PLAN LEG; Figure 8-5 Activate Flight Plan Leg Confirmation; STOP NAVIGATING A FLIGHT PLAN; Figure 8-6 Delete Flight Plan; INVERT ACTIVE FLIGHT PLAN; Figure 8-8 Invert Flight Plan
Garmin G1000 Cockpit Reference Guide for the DA42 8-3 SECTION 8 – FLIGHT PLANNING 8.4 ACTIVATE A FLIGHT PLAN LEG 1) From the Active Flight Plan Page, press the FMS Knob to activate the cursor and turn the large FMS Knob to highlight the desired destination waypoint. 2) Press the ACT LEG Softkey (usi...
Page 56 - CREATE A NEW FLIGHT PLAN; Create a New Flight Plan Using the MFD; Figure 8-10 Create FPL on MFD; Create a New Flight Plan Using the PFD; A flight plan cannot be entered using the
Garmin G1000 Cockpit Reference Guide for the DA42 8-4 SECTION 8 – FLIGHT PLANNING 8.7 CREATE A NEW FLIGHT PLAN Create a New Flight Plan Using the MFD 1) Press the FPL Key and turn the small FMS Knob to display the Flight Plan Catalog Page. 2) Press the NEW Softkey to display a blank flight plan page ...
Page 57 - Figure 8-13 Store Flight Plan Confirmation
Garmin G1000 Cockpit Reference Guide for the DA42 8-5 SECTION 8 – FLIGHT PLANNING 8.8 LOAD A DEPARTURE See the Procedures section for a discussion on loading and activating departure procedures. 8.9 LOAD AN ARRIVAL See the Procedures section for a discussion on loading and activating arrival procedu...
Page 58 - INVERT AND ACTIVATE A STORED
Garmin G1000 Cockpit Reference Guide for the DA42 8-6 SECTION 8 – FLIGHT PLANNING 5) Once all changes have been made, press the FMS Knob to remove the cursor. 8.15 INVERT AND ACTIVATE A STORED FLIGHT PLAN 1) From the Flight Plan Catalog Page, press the FMS Knob to activate the cursor. 2) Turn the la...
Page 59 - Figure 8-15 Trip Planning Page; The Page Mode must be set to MANUAL
Garmin G1000 Cockpit Reference Guide for the DA42 8-7 SECTION 8 – FLIGHT PLANNING 3) The current page mode is displayed at the top of the page: ‘AUTOMATIC’ or ‘MANUAL’. To change the page mode, press the AUTO or MANUAL Softkey. Figure 8-15 Trip Planning Page Starting WPT Ending WPT 4) For Direct-to ...
Page 60 - : An active flight plan or Direct-to must be; : VNAV is advisory only and cannot be; Create a Vertical Navigation Profile
Garmin G1000 Cockpit Reference Guide for the DA42 8-8 SECTION 8 – FLIGHT PLANNING 11) The flashing cursor moves to the calibrated airspeed field. Turn the FMS Knobs to enter a calibrated airspeed. Press the ENT Key when finished. 8.20 VERTICAL NAVIGATION (VNAV) PAGE NOTE : An active flight plan or Direc...
Page 61 - 0) With the ‘TARGET ALTITUDE’ field highlighted,; Knobs to select; ENT; Key. The cursor is now placed; MAP; VNAV Page Menu Options; MENU
Garmin G1000 Cockpit Reference Guide for the DA42 8-9 SECTION 8 – FLIGHT PLANNING in the flight plan is selected. Highlight the desired waypoint. 9) Press the ENT Key. 10) With the ‘TARGET ALTITUDE’ field highlighted, turn the small and large FMS Knobs to select the target altitude. If the selected al...
Page 63 - SECTION 9 – PROCEDURES; ARRIVALS AND DEPARTURES; Load and Activate a Departure Procedure; Figure 9-1 Select Departure; Load and Activate An Arrival Procedure; Figure 9-3 Select Arrival
Garmin G1000 Cockpit Reference Guide for the DA42 9-1 SECTION 9 – PROCEDURES SECTION 9: PROCEDURES 9.1 ARRIVALS AND DEPARTURES Load and Activate a Departure Procedure 1) With the Navigation Map Page displayed, press the FPL Key. 2) Press the LD DP Softkey. If a flight plan is active, the departure ai...
Page 64 - Figure 9-4 Select Arrival Transition; Not all approaches in the database are approved for GPS; Load and/or Activate an Approach Procedure; Figure 9-6 Selecting an Approach Procedure
Garmin G1000 Cockpit Reference Guide for the DA42 9-2 SECTION 9 – PROCEDURES 6) A second window is displayed listing available transitions for the arrival. Turn either FMS Knob to highlight the desired transition waypoint and press the ENT Key. Figure 9-4 Select Arrival Transition 7) A third window ...
Page 65 - Figure 9-7 Selecting an Approach Transition; Activate An Approach in the Active Flight Plan
Garmin G1000 Cockpit Reference Guide for the DA42 9-3 SECTION 9 – PROCEDURES 6) The cursor will move to the TRANSITIONS field. Turn the large FMS Knob to highlight the desired transition waypoint and press the ENT Key. (The “Vectors” option assumes vectors will be received to the final course segment ...
Page 67 - SECTION 10 – HAZARD; SECTION 10: HAZARD AVOIDANCE; CUSTOMIZING THE HAZARD; Figure 10-1 Page Menu
Garmin G1000 Cockpit Reference Guide for the DA42 10-1 SECTION 10 – HAZARD AVOIDANCE SECTION 10: HAZARD AVOIDANCE 10.1 CUSTOMIZING THE HAZARD DISPLAYS ON THE NAVIGATION MAP 1) With the Navigation Map Page displayed, press the MENU Key to display the Navigation Map Page Menu. The cursor flashes on the...
Page 68 - At a map range of less than 25 nm, Stormscope; Figure 10-5 Lightning Display Range Annunciation; Stormscope Page; Figure 10-6 Stormscope Page
Garmin G1000 Cockpit Reference Guide for the DA42 10-2 SECTION 10 – HAZARD AVOIDANCE At a map range of less than 25 nm, Stormscope lightning data is not displayed, but can still be present. The presence of Stormscope lightning data is indicated by the annunciation ‘LTNG < 25 nm’ in the upper righ...
Page 69 - “Cell mode” uses a clustering program to
Garmin G1000 Cockpit Reference Guide for the DA42 10-3 SECTION 10 – HAZARD AVOIDANCE NOTE: “Cell mode” uses a clustering program to identify clusters of electrical activity that indicate cells. To change the viewing mode between 360˚ and 120˚: 1) Select the Stormscope Page.2) Press the VIEW Softkey....
Page 70 - Figure 10-8 METAR and TAF Text Displayed on the; NEXRAD
Garmin G1000 Cockpit Reference Guide for the DA42 10-4 SECTION 10 – HAZARD AVOIDANCE Figure 10-8 METAR and TAF Text Displayed on the Airport (Weather) Information Page METAR Text TAF Text WX Softkey Displaying Weather on the Weather Data Link Page To select the Weather Data Link Page: 1) Turn the la...
Page 71 - Strikes depicted represent cloud to ground; to display the panning; Joystick; to place the panning arrow; Key to display pertinent information
Garmin G1000 Cockpit Reference Guide for the DA42 10-5 SECTION 10 – HAZARD AVOIDANCE ECHO TOP – Press the ECHO TOP Softkey to show the location, elevation, and direction the highest radar echo. This may not indicate the top of a storm or clouds, only the highest radar return echo. ECHO TOPS cannot b...
Page 72 - Weather Products and Symbols; Figure 10-10 depicts the symbol for each weather; Figure 10-10 Weather Product Symbols; The XM Information Page in the AUX Page Group will; The DONE Softkey on the AUX - XM; Weather Product Age; The age for each of the enabled products is displayed
Garmin G1000 Cockpit Reference Guide for the DA42 10-6 SECTION 10 – HAZARD AVOIDANCE for the selected product. Note that pressing the ENT Key when panning over an AIRMET or a SIGMET displays an information box that displays the text of the report. Panning over an airport with METAR information does ...
Page 73 - Weather Product; If the G1000 is configured to use the; Displaying Traffic on the Traffic Map Page; If data is not received for a period longer than 6 seconds,; Figure 10-11 Traffic Map Page
Garmin G1000 Cockpit Reference Guide for the DA42 10-7 SECTION 10 – HAZARD AVOIDANCE Weather Product Expires After (minutes) SIGMETs/AIRMETs 60 City Forecasts 60 County Warnings 60 Cyclone Warnings 60 Echo Tops 30 Freezing Levels 60 METARs 90 Lightning 30 NEXRAD 30 Radar Coverage 30 Cell Movement 30...
Page 74 - Figure 10-12 Self Test OK Display
Garmin G1000 Cockpit Reference Guide for the DA42 10-8 SECTION 10 – HAZARD AVOIDANCE Displaying Traffic on the Navigation Map 1) Ensure TIS is operating. With the Navigation Map displayed, press the MAP Softkey. 2) Press the TRAFFIC Softkey. Traffic will now be displayed on the map. TIS Audio Alert Wh...
Page 75 - Figure 10-13 Traffic Map Page; Avidyne; Refer to the Avidyne
Garmin G1000 Cockpit Reference Guide for the DA42 10-9 SECTION 10 – HAZARD AVOIDANCE Traffic, Out of Range Proximity Traffic, 1000’ above & descending Traffic Mode Figure 10-13 Traffic Map Page “Non-Bearing” Traffic (system is unable to determine bearing), distance is 8.0 nm, 1190’ above and descendi...
Page 76 - Figure 10-15 Traffic Map Page; Displaying Traffic on the Navigation Map; TERRAIN AND OBSTACLE PROXIMITY; Terrain data is not displayed when the
Garmin G1000 Cockpit Reference Guide for the DA42 10-10 SECTION 10 – HAZARD AVOIDANCE 4) Rotate the Joystick clockwise to display a larger area or rotate counter-clockwise to display a smaller area. Traffic, Out of Range Proximity Traffic, 1000’ above & descending Traffic Mode Figure 10-15 Traffic M...
Page 77 - Figure 10-17 Topography Scale; Color; Figure 10-18 Obstacle Symbols; Displaying Terrain and Obstacles on the; ) With the Navigation Map displayed, press the; Softkey. Terrain and obstacle
Garmin G1000 Cockpit Reference Guide for the DA42 10-11 SECTION 10 – HAZARD AVOIDANCE Maximum elevation of topography presently displayed on-screen Minimum elevation of topography presently displayed on-screen Ground elevation at present aircraft position Aircraft altitude Figure 10-17 Topography Sc...
Page 79 - SECTION 11 – ABNORMAL; SECTION 11: ABNORMAL; REVERSIONARY MODE; Should a system detected failure occur in either display,; Normal PFD Display; Reversionary display mode can also be manually; The Airplane Flight Manual always takes
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 11 – ABNORMAL OPERATION 11-1 SECTION 11: ABNORMAL OPERATION 11.1 REVERSIONARY MODE Should a system detected failure occur in either display, the G1000 automatically enters reversionary mode. In reversionary mode, critical flight instrumentatio...
Page 80 - ABNORMAL COM OPERATION; When a COM tuning failure is detected by the system,; UNUSUAL ATTITUDES; The PFD will ‘declutter’ when the aircraft enters an; Figure 11-2 Extreme Pitch Indication; STORMSCOPE OPERATION WITH; If heading is lost, strikes and/or cells must be cleared
Garmin G1000 Cockpit Reference Guide for the DA42 SECTION 11 – ABNORMAL OPERATION 11-2 11.2 ABNORMAL COM OPERATION When a COM tuning failure is detected by the system, the emergency frequency (121.500 MHz) is automatically loaded into the active frequency field of the COM radio for which the tuning f...
Page 81 - SECTION 12 – ANNUNCIATIONS; ALERTS
Garmin G1000 Cockpit Reference Guide for the DA42 12-1 SECTION 12 – ANNUNCIATIONS & ALERTS SECTION 12: ANNUNCIATIONS & ALERTS NOTE: The Airplane Flight Manual Supplement s u p e r s e d e s i n f o r m a t i o n f o u n d i n t h i s document. The G1000 Alerting System conveys alerts to the ...
Page 82 - ALERT LEVEL DEFINITIONS
Garmin G1000 Cockpit Reference Guide for the DA42 12-2 SECTION 12 – ANNUNCIATIONS & ALERTS 12.1 ALERT LEVEL DEFINITIONS The G1000 Alerting System, as installed in Diamond DA42 aircraft, uses three alert levels. • WARNING: This level of alert requires immediate pilot attention. A warning alert is...
Page 83 - AIRCRAFT ALERTS; The following alerts are configured specifically for the; WARNING Alerts; DOOR OPEN; CAUTION Alerts; PITOT FAIL
Garmin G1000 Cockpit Reference Guide for the DA42 12-3 SECTION 12 – ANNUNCIATIONS & ALERTS 12.2 AIRCRAFT ALERTS The following alerts are configured specifically for the Diamond DA42 aircraft. See the Airplane Flight Manual for information regarding pilot responses. WARNING Alerts Annunciation Wind...
Page 84 - DEICE LVL LO; Annunciation Advisory Alerts; PFD FAN FAIL; TIS Voice Alerts; The following voice alerts can be configured for ‘Male’
Garmin G1000 Cockpit Reference Guide for the DA42 12-4 SECTION 12 – ANNUNCIATIONS & ALERTS Annunciation Window Text Alerts Window Message Audio Alert DEICE LVL LO De-icing fluid level is low. Single Aural Tone DEIC PRES HI De-icing pressure is high. DEIC PRES LO De-icing pressure is low. STICK LI...
Page 85 - System Annunciation
Garmin G1000 Cockpit Reference Guide for the DA42 12-5 SECTION 12 – ANNUNCIATIONS & ALERTS 12.3 G1000 SYSTEM ANNUNCIATIONS When an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with the failed data. The following section describes various system annun...
Page 87 - Figure 12-5 G1000 System Failure Annunciations
Garmin G1000 Cockpit Reference Guide for the DA42 12-7 SECTION 12 – ANNUNCIATIONS & ALERTS A red ‘X’ may be the result of an LRU or an LRU function failure. The Figure 12-5 illustrates all possible flags and the responsible LRUs. GDC 74A Air Data Computer GTX 33 Transponder OR GIA 63 Integrated A...
Page 88 - Message
Garmin G1000 Cockpit Reference Guide for the DA42 12-8 SECTION 12 – ANNUNCIATIONS & ALERTS 12.4 G1000 SYSTEM MESSAGE ADVISORIES This section describes various G1000 system message advisories. Certain messages are issued due to an LRU or an LRU function failure. MFD & PFD Alert Messages Messa...
Page 89 - Alerts Window Message
Garmin G1000 Cockpit Reference Guide for the DA42 12-9 SECTION 12 – ANNUNCIATIONS & ALERTS Database Alert Messages Alerts Window Message Comments MFD1 DB ERR – MFD1 aviation database error exists. The MFD and/or PFD detected a failure in the aviation database. Attempt to reload the aviation data...
Page 90 - GIA 63 Alert Messages
Garmin G1000 Cockpit Reference Guide for the DA42 12-10 SECTION 12 – ANNUNCIATIONS & ALERTS GMA 1347 Alert Messages Alerts Window Message Comments GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The G1000 system should be service...
Page 92 - GEA 71 Alert Messages
Garmin G1000 Cockpit Reference Guide for the DA42 12-12 SECTION 12 – ANNUNCIATIONS & ALERTS GIA 63 Alert Messages (Cont.) Alerts Window Message Comments GPS1 SERVICE – GPS1 needs service. Return unit for repair. A failure has been detected in the GPS1 and/or GPS2 receiver. The receiver may still...
Page 93 - GRS 77 Alert Messages
Garmin G1000 Cockpit Reference Guide for the DA42 12-13 SECTION 12 – ANNUNCIATIONS & ALERTS GTX 33 Alert Messages Alerts Window Message Comments XPDR1 CONFIG – XPDR1 config error. Config service req’d. The transponder configuration settings do not match those of backup configuration memory. The G100...
Page 96 - SLCT NAV; BACKUP PATH
Garmin G1000 Cockpit Reference Guide for the DA42 12-16 SECTION 12 – ANNUNCIATIONS & ALERTS Miscellaneous Alert Messages (Cont.) Alerts Window Message Comments SLCT NAV – Select NAV on CDI for approach. The system notifies the pilot to set the CDI to the correct NAV receiver. Set the CDI to the c...
Page 97 - INDEX
Garmin G1000 Cockpit Reference Guide for the DA42 Index-1 INDEX A Abnormal COM operation 11-2Activate a flight plan 8-3Active flight plan 8-2ADF 1-4ADVISORY 12-1Advisory alerts 12-4Age 10-6AHRS 12-13Aircraft alerts 12-3AIRMET 10-5Airport frequency 7-6Airport information 7-3Airspace alerts 7-9Airspeed ...
Garmin 0734.7A
User Manual
Garmin 010-11099-10
User Manual
Garmin 100
User Manual
Garmin 100/100i
Quick Guide
Garmin 100 BLUE
User Manual
Garmin 10v
Installation Manual
Garmin 110
User Manual
Garmin 120
User Manual
Garmin 160
User Manual
Garmin 160 BLUE
User Manual
Garmin 130
User Manual
Garmin 1633.A7
User Manual