Garmin GTX 330- Manuals

Page 2 - The GTX 330 should be turned off before starting or shutting; Printed in USA

© Copyright 2002, 2007, 2008, 2012 Garmin Ltd. or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written conse...

Page 3 - It is the responsibility of the GTX 330 owner to obtain proper

Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, Garmin will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no ...

Page 4 - Mode Selection Keys

The GTX 330 transponder is powered on by pressing the STBY , ALT or ON keys, or by a remote avionics master switch (if applicable). After power on, a start-up page is displayed while the unit performs a self test. Mode Selection Keys OFF  Powers off the GTX 330. Pressing STBY , ON, or ALT key power...

Page 5 - GND; Keys for Other GTX 330 Functions; IDENT; On a dual transponder installations, change the squawk code on the; be entered on the standby transponder but it must be set to; ON; or; ALT; immediately following the

When the transponder code is changed, a notification is sent to ATC by the GTX 330. This notification is temporary and may not be sent if the GTX is not active (i.e., set to ON , ALT or GND ) when the code is changed. NOTE: On a dual transponder installation, change the code on the active transponde...

Page 6 - to the GTX 330 parameters, contact your Garmin authorized dealer.; Will; Function Display

NOTE: GTX 330 options are normally set at time of installation. For changes to the GTX 330 parameters, contact your Garmin authorized dealer. PRESSURE: ALT: Displays the altitude data supplied to the GTX 330 in feet, hundreds of feet (i.e., flight level), or meters (dependent upon installation confi...

Page 8 - FUNC; To select a new monitored altitude, press the

Failure Annunciation If the unit detects an internal failure or an ADS-B transmission failure, the screen displays FAIL. When FAIL is annunciated no transponder data is transmitted. Mode S Data Transmission In addition to 4096 code and pressure altitude, the GTX 330 is capable of transmitting aircra...

Page 9 - Entering a Flight ID Number; Flight ID changes require a power cycle. The GTX 330 must be set

Entering a Flight ID Number When configured for FLT ID PWR-UP ENTRY at installation, the flight crew must enter the Flight ID before the GTX 330 will operate. After the flight crew enters the correct Flight ID, the aircraft identification that is transmitted in response to ATC radar interrogations i...

Page 10 - GTX 330 Mode S Transponder Features; GTX 330D Diversity Mode S Transponder; The GTX 330 with software version 7.00 or later, has been shown; Audio Alerts

GTX 330 Mode S Transponder Features GTX 330D Diversity Mode S Transponder The GTX 330D Diversity Mode S Transponder incorporates antennas mounted on the top and bottom of the aircraft for dependable operation while maneuvering. Top and bottom antennas are less prone to antenna shadowing by the aircr...

Page 12 - Garmin Corporation

© 2002, 2007, 2008, 2012 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U.K. Garmin Corporation No. 68, Jangshu 2 nd Road, Shijr, Ta...