Garmin 300C - Manuals

Garmin 300C – Manual in PDF format online.

Manuals:

Manual

Manual Garmin 300C

Summary

Page 2 - Use the following table to determine the drill bit size:; Material; Drill Size Table; To mount the bracket assembly:; necessary, adjust the knob to spread the bracket arms apart.; Flush Mounting the Fishfinder 300C; 00C requires the following tools:; To flush mount the Fishfinder 300C:; mount the Fishfinder 300C.

2 Fishfinder 300C Installation Instructions Use the following table to determine the drill bit size: Material Material Thickness (in.) Material Thickness (mm) Hole Size (in.) Hole Size (mm) Hole Size (Drill Number) Aluminum alloy sheet metal from 1/32 to 5/64 from 0.76 to 2.03 .128 3.25 30 from 3/32...

Page 3 - Place the Fishfinder 300C into the cutout.; seize lubricant to the screw before using.; Step 3: Install the Transducer; Assembling the Transducer; To assemble the transducer:

3 Fishfinder 300C Installation Instructions 8. If the top and bottom mounting covers are attached to the front of the Fishfinder 300C, remove them by unsnapping the covers from the sides. 9. Place the Fishfinder 300C into the cutout. Mounting covers 10. Securely tighten the four mounting screws thro...

Page 4 - Mounting the Transducer on a Trolling Motor; To mount the transducer on a trolling motor:; extend on both sides of the mount.; Mounting the Transducer on a Transom

4 Fishfinder 300C Installation Instructions Mounting the Transducer on a Trolling Motor To mount the transducer on a trolling motor: 1. Slide the large cable tie through the slot on the transducer mount, with the ridges of the cable tie facing up, until equal lengths of cable tie extend on both side...