Gaggenau VC 230-113 - Manuals

Page 4 - Preface

2 Preface Cooking with your new glass-ceramic cookerwill be even more fun than before. The appliance offers you the following advantages – The cooker features SuperQuick cooking zones. – Thanks to the novel installation method implemented, installation is child's play! To ensure that you will be abl...

Page 6 - Operating for the first time

1.2 Operating for the first time Before operating the appliance for the first time, please pay attention to the following notes:– The appliance must be installed and connected by a specialist before it is operated for the first time. – If an earthing-pin plug is fitted on the appliance, it must be c...

Page 7 - SuperQuick; Structure and operating principle

5 2.1 Structure 2.2 Special accessories 2.3 Operating principle 2.4 Energy saving tips 1 Pilot light 2 Control knob for front cooking zone 3 Control knob for rear cooking zone 4 Residual heat display 5 SuperQuick cooking zone Ø 140 mm (1200W) 6 SuperQuick cooking zone Ø 120/180 mm (700/1800 W) You c...

Page 9 - Switching on the combination function

3.2 Operating with the combination function Switching on the combination function – T urn control knob 3 (rear cooking zone) to the left to the (Combination) position on the left and then to the cooking level you require. Switching off combination: – T urn control knob 3 to the 0 position. The combi...

Page 12 - Assembly instructions

10 6.1 Technical data Pay attention to the "Important notes" (Chapter 1). The appliance must only be installed by an authorised specialist, paying attention to therelevant regulations of the power supply companiesand the regional construction regulations. The installing technician is respons...

Page 13 - Electrical connection; if damaged, the mains cable

11 6.2 Electrical connection Rated power consumption: 3.0 kW You are advised to place a properly installed socketoutlet with earthing contact around 70 cm abovefloor level behind the appliance. Note: if there is a need for an intermediate cupboard wallunder the hob, cut out the recess so that the tr...

Page 14 - Installation and removal; Installation

6.3 Installation and removal Installation – Produce the recess for one or several Varioappliance(s) in your worktop. Proceed as indicated on the installation sketch and thedimension table. The dimension table containsdetails of the space requirement for the trimbetween the appliances. Important: the...