Furman HA-6AB - Manuals - manualsarea.com

Page 2 - matches the serial number on your unit.

2 H A - 6 A B / H A - 6 A B E M a n u a l INTRODUCTION Congratulations on your purchase of a Fur-man Sound HA-6AB. You have chosen the most versatile headphone ampliﬁ er available. The HA-6AB is a unique combination of a headphone ampliﬁ er and a conventional power ampliﬁ er, which can save the expe...

Page 3 - ACCESSORIES; RECORDING

3 H A - 6 A B / H A - 6 A B E M a n u a l ers, selected by pressing front panel pushbuttons. Without the HA-6AB, a separate ampliﬁ er would be needed for the studio speakers. The HA-6AB also features a convenient input level control on the left side of the front panel. A pair of yellow LED’s (one fo...

Page 4 - For studios that require each tracking mu-

4 H A - 6 A B / H A - 6 A B E M a n u a l are used, it is important that they clamp tightly to the musicians’ heads so that a minimal amount of sound leaks out.The cue mix heard in the headphones is a com-bination of the previously recorded tracks along with the new sounds being added. It is general...

Page 5 - USE OF THE HR-2 REMOTE; REHEARSAL

5 H A - 6 A B / H A - 6 A B E M a n u a l USE OF THE HR-2 REMOTE STATIONS (SATELLITES) The HR-2 Remote Stations may be used to increase the number of headphones which can be accommodated by an HA-6AB, and to place a volume control within reach of each individual needing it. They are compact boxes wh...

Page 6 - DESCRIPTION OF CONTROLS:; FRONT PANEL

6 H A - 6 A B / H A - 6 A B E M a n u a l DESCRIPTION OF CONTROLS: FRONT PANEL INPUT LEVEL: The Input Level control provides a means of scaling the effect of the individual head-phone volume controls. The Input Level should be adjusted so that there is an adequate range of volumes available at each ...

Page 7 - REAR PANEL

7 H A - 6 A B / H A - 6 A B E M a n u a l sis ground). The connection from pin 1 to the shell is optional on all 3 pin connectors, and can be removed if present, by opening up the connector on the cable and disconnecting it.SPEAKER A OUTPUTS: These outputs should be used when a pair of speakers is u...

Page 8 - C I R C U I T D E S C R I P T I O N; This section is intended to assist the; INSTALLATION

8 H A - 6 A B / H A - 6 A B E M a n u a l HA-6AB directly without ﬁ rst being preampliﬁ ed. The 1/4” phone inputs are stereo jacks (tip-ring-sleeve) wired for a balanced input. If a mono phone plug is inserted, the input will automatically be converted to unbalanced. If using a mono sig-nal plug int...

Page 9 - Manufacturer warrants to the original

9 H A - 6 A B / H A - 6 A B E M a n u a l For best results, the input cables plugged into the HA-6AB should be shielded. Balanced connections should use shielded, twisted-pair cable. Headphone cables and speaker cables do not need to be shielded, though no harm is done if shielded cables (such as mi...

Page 10 - SERVICE

10 H A - 6 A B / H A - 6 A B E M a n u a l obligation with respect to the Products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circum-stances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, ...

Page 11 - HA-6AB SPECIFICATIONS; 0 watts per channel, stereo, into either 4 ohms

11 H A - 6 A B / H A - 6 A B E M a n u a l HA-6AB SPECIFICATIONS OUTPUTS: Power: 20 watts per channel, stereo, into either 4 ohms or 8 ohms, 20 Hz to 20 KHz. Connectors: Speakers A: 5-way binding posts (accommodates dual banana plugs, spade lugs, bare wires, etc.) Speakers B-Satellite Remote: Male X...