Fujitsu ASTG34CMTA - Manuals

Page 2 - Indoor unit accessories; WARNING

En-2 OPERATING MANUAL WARNING • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person respon...

Page 3 - AIR CONDITIONER Wall Mounted Type; Vertical airflow direction louver; Remote controller signal receiver; Indoor Unit Overview and Operations

En-3 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL 1 Intake grille Before starting operation, make sure that the intake grille has been shut completely. Incomplete closing may have an effect on the proper function or performance of the product. 2 "MANUAL AUTO" button Use when the remote...

Page 4 - Remote Controller Overview and Operations; You can quickly start operation with the following 3 steps:; Remote controller display

En-4 OPERATING MANUAL CAUTION • To prevent malfunction or damage of the remote controller: - Place remote controller at where will not be exposed to direct sunlight or excessive heat. - Remove batteries if the product is not going to be used for an extended period. - Exhausted batteries must be remo...

Page 5 - OPERATING MANUAL; Remote Controller Overview and Operations (continued); Signal transmitter; RESET

En-5 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Remote Controller Overview and Operations (continued) 7 Signal transmitter Aim at the signal receiver of the indoor unit properly. • Signal transmit indicator on the remote controller display shows that the signal from the remote controller is ...

Page 6 - Timer Operation; ON timer or OFF timer; WEEKLY timer

En-6 OPERATING MANUAL Note for timer settings: Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong. In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting. Timer Operation ON ...

Page 7 - To set the WEEKLY timer, first follow steps

En-7 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Timer Operation (continued) To set the WEEKLY timer, first follow steps ① ~ ③ on page 6 for the ON/OFF timer. 4 Select the program number and the day using the "SELECT" button. Program 1Week Program Monday Program Tuesday Program Sunday...

Page 8 - Demand Response and Indoor Unit Operation; About the ENERGY SAVING Operation; About the HUMAN SENSOR; Notice

En-8 OPERATING MANUAL Demand Response and Indoor Unit Operation Human Sensor (Energy Saving) To prevent waste of electricity, this function controls the temperature setting when no one is occupying the room. Energy Saving program is on at the time of purchase. 1 To activate the Energy Saving program...

Page 9 - General Informations on Operation; Auto-restart function; Temperature and Humidity Range

En-9 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL General Informations on Operation Auto-restart function In event of power interruption such as a blackout, the air conditioner stops once. But it restarts automatically and performs previous operation when the power supply is resumed. If any po...

Page 10 - Cleaning and Care; CAUTION

En-10 OPERATING MANUAL Cleaning and Care CAUTION • Before cleaning the indoor unit, be sure to turn it off and all the power supply has been disconnected. • Before starting operation, make sure that the intake grille has been shut completely. Incomplete closing of the intake grille might have an eff...

Page 11 - Replacing dirty air cleaning filters; After extended non-use of the unit

En-11 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Cleaning and Care (continued) Air cleaning filter installation 1 Open the intake grille and remove the air filters. Air filter (Right & Left) 2 Install the air cleaning filter set (set of 2). (1) Set the air cleaning filter into the air cl...

Page 12 - Troubleshooting

En-12 OPERATING MANUAL WARNING In following events, immediately stop operation of the air conditioner, and disconnect all the power supply by turning off the electrical breaker or disconnecting the power plug. Then consult your dealer or authorized service personnel. As long as the unit is connected...