Frigidaire FFHT2045VS - Manuals

5 WARNING The anti-tip bracket must be installed according to the instructions in your Use & Care Manual. Failure to do so will result in injury. INSTALLATION  NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space for the handle so t...

6  NOTE The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be per- formed by a qualified person. IMPORTANT Place the door on a padded surface to ...

7 DOOR REMOVAL 8. Remove the 3 pan head screws at the center of the cabinet (Figure 3) and install them on the opposite side of the cabinet. 9. Remove both lower hinge covers.10. Remove the screw from the door stopper with a Phillips screwdriver (see Figure 4). 11. Unscrew the bottom hinge pin from ...

8 DOOR REMOVAL 9. Repeat steps 1-8 for the freezer door. 10. Lower the refrigerator door over the bottom hinge pin and close the door. 11. Screw in and tighten the center hinge pin using an adjustable wrench. 12. Lower the freezer door over the center hinge pin and close door. Place the lower hinge ...

9 DOOR HANDLE INSTALLATION (SOME MODELS) To attach the metal refrigerator handle (Stainless steel, Black Stainless steel, Stainless Steel EZCare): 1. Place the rounded part of handle onto shoulder screw on the face of the door and align the 2 holes in top of handle with the 2 holes in top of the doo...

10 DOOR HANDLE INSTALLATION (SOME MODELS) To attach the plastic refrigerator handle (Smooth white/black): 1. With the door open, place the end of the handle on the dove tail mounting screw and pull it down to secure it in place. 2. Align the handle base with the holes in top of the door. 3. Install ...

11 Nameplate DOOR HANDLE INSTALLATION (SOME MODELS) To reverse the door handles: 2. Remove the button plugs in the refrigerator door. Button Plug Button Plugs 3. Reverse the freezer and refrigerator handles as shown. 4. Install the button plugs and the name plate on the opposite side of door. Namepl...

12 WATER SUPPLY CONNECTION WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before con- necting a water supply line to the refrigerator. CAUTION To Avoid Property Damage: • Stainless Steel braided tubing is recom- men...

13 WATER SUPPLY CONNECTION To Connect Water Supply Line To the Ice Maker Inlet Valve 1. Disconnect refrigerator from electric power source. 2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve. ...

14 IMPORTANT The ice maker is shipped in the On position. To ensure proper function for your ice maker, hook up the water supply immediately or turn the ice maker OFF . If the ice maker is on and the water supply is not connected, the water valve will make a loud chattering noise. ICE PRODUCTION: WH...

15  NOTE When first turning the refrigerator on, adjust the control to Recommended . After 24 hours, adjust the controls as needed. IMPORTANT Adjusting the refrigerator temperature control to OFF turns off the compressor and prevents the refrigerator from cooling, but does not dis- connect the powe...

16 Shelf Adjustment The shelves are easy to adjust to suit individual needs. Before adjusting the shelves, remove all food. To adjust shelves, lift the back of the shelf and pull forward. To replace shelves , insert the rear of the shelf into any pair of shelf rails and carefully push the shelf back...

17  NOTE Leafy vegetables keep best when stored with the Humidity Control set on High Humidity, or in a drawer without a Humidity Control. This keeps incoming air to a minimum and maintains maximum moisture content. Store non-leafy vegetables and fruits still in their skins at the low humidity sett...

18  NOTE Rigid foam insulation is very energy efficient but is not a sound insulator. Understanding the sounds you may hear Your new, high-efficiency refrigerator may intro - duce unfamiliar sounds. These sounds normally indicate your refrigerator is operating correctly. Some surfaces on floors, wa...

19 FILTER REPLACEMENT (OPTIONAL FEATURE--SELECT MODELS) PureAir Ultra II TM Air Filter Keep your refrigerator fresh with our PureAir Ultra II TM air filter’s active carbon technology that absorbs and captures undesirable odors more effectively than baking soda. To ensure optimal filtering of refrige...

20 CARE AND CLEANING Protecting your investment Keeping your refrigerator clean maintains ap- pearance and prevents odor build-up. Wipe up any spills immediately and clean the freezer and refrigerator compartments at least twice a year. When cleaning, take the following precautions: • Never use CHLO...

21 Care and Cleaning Tips Part What To Use Tips and Precautions Interior & Door Liners • Soap and water• Baking soda and water Use 2 tbsp of baking soda in 1 qt of warm water. Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part....

22 Common Occurrences Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refrigerator does not run. • Ensure the plug is tightly pushed into an electric...

23 WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used a...

5 Ice Maker Installation Instructions (without access cover) 19. Remove the connector box from the unit with a Philips screwdriver. Discard screw. See Figure 15. 20. Open the connector box using a flat head screwdriver. Insert at the notched point and turn. Insert the water valve in the hole in the ...

6 Connecting Ice Maker to Water Supply Before Installing The Water Supply Line, You Will Need: • Basic Tools: adjustable wrench, flat blade screwdriver, and Phillips screwdriver • Access to a household cold water line with water pressure between 30 and 100 psi. • A water supply line preferably made ...

7 Connecting Ice Maker to Water Supply To Connect Water Supply Line To Ice Maker Inlet Valve 1. Disconnect refrigerator from an electrical power source. 2. Place the end of water supply line into the sink or a bucket. Turn ON the water supply and flush the supply line until the water is clear. Turn ...