Friedrich P12A - Manuals

5 Remote Control Identification and Function Time/Temperature Set Control Used for adjusting the timer and temperatureThe default display on control panel is room temperature.When the " " or the " " button is pressed in cool mode, the set temperature is displayed and may be adjusted....

6 Window Panel Instructions for assembling the window adapter kit 1. Insert tube adapters through the back of the window panel. 2. Secure each tube adapter with four screws through the front of the window panel. 3. Insert window panel extensions into window panel. Lightly tighten the screws in the w...

7 Installing the window adapter kit Note: The window adapter kit must be installed and con-nected for the air conditioner to work properly in Cool mode. The window adapter kit is not required when using the unit in Dehumidify or Fan modes.Your window adapter kit has been designed to fi t most stan- ...

8 Condensation Handling Your ZoneAire ® Portable Air Conditioner is designed to evapo- rate the condensation removed from the interior space through the exhaust hose. Under certain conditions it is possible that the unit will not evaporate 100% of the removed moisture. The unit is designed with a bu...

9 Cleaning the air conditioner Clean the surface of the unit with a damp cloth, then dry using a duster or similar. ! CAUTION Do not use chemical solvent (like benzene or alcohol) to clean the surface of the unit. If you do so, the surface may be scratched, damaged or even cause the case to become d...

10 Trouble Check Action Air conditioner does not operate Is there power?Is it plugged in? Push the plug into the wall socket Is the fuse or circuit breaker switch off? Change the fuse or reset breaker Is timer on? Pres TIMER button Cooling ef fi ciency is not good Is air inlet or outlet blocked? Cle...