Friedrich P/N9368987060-01 - Manuals

En-5 TIMER FUNCTIONS OFF timer (See page 5.) Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stopsafter the set time has passed. The timer can be set up to 24 hours in advance. ON timer (See page 5.) Use this timer function to start air con...

En-6 WEEKLY TIMER Press the timer mode button to select the weekly timer. 2 Press the SET button for 2 sec-onds or more. 1 3 CLOCK ADJUST ● Day of the week setting DAY OFF DAY SET 1 2 Press the DAY button to select the day of the week, and then press theSET button to confirm the setting. For ALL, al...

En-7 WEEKLY TIMER ● To start CLOCK ADJUST When the weekly timer is selected, thetimer starts automatically. ● To cancel • Press the DELETE button to cancelthe timer mode. • T h e t i m e r m o d e c a n a l s o b ecanceled by changing the timermode using the timer mode button. To set the DAY OFF (fo...

En-8 TEMPERATURE SET BACK TIMER Press the SET BACK button to change to the SET BACK con-firmation display.The SET BACK operating time and the set temperature willbe displayed. 2 Press the SET button for 2seconds or more. 1 3 ● Day setting ● Operating time setting Follow the same procedures to set th...

En-9 During cooling operation W h e n t h e E N E R G Y S AV E i spressed, the thermostat settingis automatically rised 2 °F every60 minutes, until the thermostatis rised a total of 4 °F. 82 ° F 78 ° F 80 ° F Energy save 74 ° F 72 ° F 70 ° F 68 ° F 66 ° F Energy save OPERATING TIPS Mode operation: A...

En-10 This indoor unit can be connected to a multi-type outdoor unit. The multi-type air conditioner allows multiple indoor units tobe operated in multiple locations. The indoor units may be operated simultaneously, in accordance with their respectiveoutput. Instructions relating to inverter ( ❖ ) a...

En-11 ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Start air conditioner operation before performing this procedure. NOTES • To change the range of swing, use the remote controller vertical airflow directi...

En-12 CARE AND MAINTENANCE CAUTION! ● Before cleaning the unit, be sure to stop the unit and power supply. (Turn off the electrical breaker) ● A fan operates at high speed inside the unit, and personal injury could result. Cleaning the air filter 1 Push the intake grille pushbuttons (two places) and...

En-13 SELF-DIAGNOSIS 12 Stop the air conditioner operation. Press the set temperature buttons simultaneously for 5 seconds or more to start the self-diagnosis. SU MO TU WE TH FR SA SU MO TU WE TH FR SA Unit number (usually 0) Error code ex. Error display ex. Self-diagnosis check 3 Press the set temp...

En-14 TROUBLESHOOTING Symptom Doesn’t operate immedi-ately: Noise is heard: Smells: Mist or steam areemitted: Air flow is stopped: Problem ● If the unit is stopped and then immediately started again, the com-pressor will not operate for about 3 minutes, in order to preventfuse blowouts. ● Whenever t...

Friedrich Air Conditioning Co. 4200 N. Pan Am San Antonio, Texas 78218 USA Tel. (210) 357-4400 Fax (210) 357-4490 Visit us at www. friedrich. com 9368987060-01_OM_es.p65 2/4/10, 4:48 PM 19