Ford 2000 Mustang- Manuals

WARNING LIGHTS AND CHIMESBase instrument cluster Optional instrument cluster Turn signal Illuminates when theleft or right turn signalor the hazard lights areturned on. If one orboth of the indicators stay on continuously or flashfaster, check for a burned-out turn signal bulb. Referto Exterior bulb...

position to remind you to fasten your safety belts.For more information, refer to the Seating and safety restraints chapter. Charging system Illuminates when theignition is turned tothe ON position andthe engine is off. Thelight also illuminates when the battery is notcharging properly, requiring el...

to check the bulb. If it comes on after the engine isstarted, one of the engine’s emission control systemsmay be malfunctioning. The light may illuminatewithout a driveability concern being noted. Thevehicle will usually be drivable and will not requiretowing. What you should do if the Service Engin...

Under engine misfire conditions, excessiveexhaust temperatures could damage the catalytic converter, the fuel system, interior floorcoverings or other vehicle components, possiblycausing a fire. Low fuel Illuminates as an earlyreminder of a low fuelcondition indicated onthe fuel gauge (refer to Fuel...

Traction Control Y active Momentarilyilluminates when theignition is turned toON. It also illuminateswhen the Traction Control y system begins applying and releasing the brakes and adjusting the enginecharacteristics to limit a wheelspin condition. It willbe lit for a minimum of four seconds or for ...

added. This lamp will also illuminate when theignition is turned to ON and the engine is off. Formore information on adding engine coolant, refer to Engine coolant in the Maintenance and care chapter. Safety belt warning chime Sounds to remind you to fasten your safety belts. For information on the ...

Optional instrument cluster gauges Fuel gauge Displays approximatelyhow much fuel is in thefuel tank (when thekey is in the ONposition). The fuel gauge may vary slightly when thevehicle is in motion. The ignition should be in theOFF position while the vehicle is being refueled.When the gauge first i...

This gauge indicates the temperature of the enginecoolant, not the coolant level. If the coolant is not atits proper level the gauge indication will not beaccurate. Speedometer Indicates the current vehicle speed. • Base instrumentcluster • Optional instrumentcluster Odometer Registers the totalkilo...

Engine oil pressure gauge This shows the engineoil pressure in thesystem. Sufficientpressure exists as longas the needle remains in the normal range (the areabetween the “L” and “H”). If the gauge indicates low pressure, stop the vehicleas soon as safely possible and switch off the engineimmediately...

HEADLAMP CONTROL • Pull the headlampcontrol toward youto the first positionto turn on theparking lamps, taillamps, license platelamps and markerlamps. • Pull the headlamp control toward you to the outerposition to turn on the headlamps (in addition tothe previous lamps). Daytime running lamps (DRL) ...

PANEL DIMMER CONTROL To adjust thebrightness of theinstrument panel: • Rotate clockwise/counterclockwisewhen the headlampcontrol is in theparking lamp or low-beam position. To turn on the courtesy lamps: • Rotate fully counterclockwise. REAR WINDOW DEFROSTER(IF EQUIPPED) The rear defrostercontrol is...

CLIMATE CONTROL SYSTEM Manual heating and air conditioning system Fan speed control Controls the volume ofair circulated in thevehicle. Temperature control knob Controls thetemperature of theairflow inside thevehicle. Mode selector control Controls the directionof the airflow to theinside of the veh...

faster. Airflow will be from the instrument panelregisters. This mode can also be used to reduceundesirable odors from entering the vehicle. • A/C-Uses outside air to cool the vehicle. It isquieter than MAX A/C but not as economical.Airflow will be from the instrument panelregisters. • (Panel)-Distr...

Operating tips • In humid weather, select before driving. This will reduce fogging on your windshield. Aftera few minutes, select any desired position. • To reduce humidity buildup inside the vehicle,don’t drive with the climate control system in theOFF or MAX A/C position. • Don’t put objects under...

USING YOUR AUDIO SYSTEM AM/FM Stereo/Cassette/Premium Sound Power control Press the control toturn the audio systemon or off. Volume control Press the control toraise or lower volume. If the volume is setabove a certain level and the ignition is turned off,the volume will come back on at a “nominal”...

Tune adjust in radio mode Tune adjust allows youto tune in a particularradio station. You canmanually locate thestation by using the Automatic Music Search (AMS)button. • Press the AMS control until the display showsTUNE. • Press and releaseeither or on the SEEK control tochange to the next frequenc...

• Press to listen to the previousselection on thetape. • Press to listen to the next selection on the tape. The tape deck stops and returns to play mode whenthe AMS circuit senses a blank section on the tape.In order to ensure proper operation of the AMSfeature, the tape MUST have a blank section of...

held in memory on the control you selected. Repeat the steps for each station memory presetbutton you want to set. If the battery is disconnected, the memory presetstations will need to be reset. Bass adjust The bass adjust control allows you to increase ordecrease the audio system’s bass output. • ...

• Press the (+) side ofthe volume controlto shift sound to theright speakers. • Press the (−) side of the volume control to shiftsound to the left speakers. Speaker fade adjust Speaker sound distribution can be adjusted betweenthe front and rear speakers. • Push the AUDIOcontrol repeatedlyuntil the ...

Tape eject Press the control tostop and eject a tape. Dolby T noise reduction Dolby t noise reduction reduces the amount ofhiss and static duringtape playback. Press the control to activate (and deactivate) Dolby t noise reduction. Dolby t noise reduction is manufactured under license from Dolby t L...

Power control Press the control toturn the audio systemon or off. Volume control Press the control toraise or lower volume. If the volume is setabove a certain level and the ignition is turned off,the volume will come back on at a “nominal”listening level when the ignition switch is turnedback on. I...

Use the SEEK buttonto scan up or down thefrequency band. • Press to find the next listenable station down the frequency band. • Press to find the next listenable station up the frequency band. Scan function in tape mode This feature allows youto scan the tapecurrently playing,stopping on eachselecti...

• Press the (+) side ofthe volume controlto shift sound to theright speakers. • Press the (−) side of the volume control to shiftsound to the left speakers. Speaker fade adjust Speaker sound distribution can be adjusted betweenthe front and rear speakers. • Push the AUDIOcontrol repeatedlyuntil the ...

Press the control tofast forward the tape. Once the end of thetape is reached, tapedirection reverses and the opposite side of the tapeplays. Tape eject Press the control tostop and eject a tape. Dolby T noise reduction Dolby t noise reduction reduces the amount ofhiss and static duringtape playback...

Single Disc CD Player Power and volume control The compact disc player operates when the audiosystem is on and a CD is inserted (label side up). The volume is controlled by the VOLUME control onthe audio system. Play function The system enters thePLAY mode when a CDis loaded, label side up,into the ...

approximately eight seconds. This continues untilyou press the SCAN control a second time or ejectthe CD. While in the scan mode, the display flashesSCAN. Reverse/fast forward To quickly search for aparticular point in aselection, press theright side of the REV/FF control (to fast forward) orthe lef...

Shuffle feature The shuffle featureplays all tracks on thecurrent CD in randomorder. Press the SHUFFLE control to start this feature.Random order play will continue until the control ispressed again. Eject Push the EJECTcontrol to stop CD play,eject the CD, andresume radio or tapeoperation. Troubles...

Cleaning compact discs Inspect all discs for contamination before playing. Ifnecessary, clean discs only with an approved CDcleaner and wipe from the center out to the edge.Do not use circular motion. CD and CD player care • Handle discs by their edges only. Never touch theplaying surface. • Do not ...

and FM stations may use for their broadcasts.Allowable frequencies are: AM 530, 540–1600, 1610 kHz FM 87.7, 87.9–107.7, 107.9 MHz Not all frequencies are used in a given area. Radio reception factors Three factors can affect radio reception: • Distance/strength. The further an FM signal travels, the...

Never adjust the steering wheel when thevehicle is moving. SPEED CONTROL To turn speed control on • Press ON. Vehicle speed cannotbe controlled until thevehicle is traveling ator above 48 km/h (30mph). Do not use the speed control in heavy trafficor on roads that are winding, slippery, or unpaved. D...

POWER WINDOWS Press and hold the rocker switches to open andclose windows. • Press the top portionof the rocker switchto close. • Press the bottomportion of the rockerswitch to open. Express down To make the driverwindow open fullywithout holding thewindow control, pressthe driver windowcontrol comp...

for the driver’s press the control. Press the controlagain to restore the window controls. POWER DOOR LOCKS Press U to unlock alldoors and L to lock alldoors. POWER SIDE VIEW MIRRORS (IF EQUIPPED) To adjust your mirrors: 1. Move the mirror selector control all the way tothe left to adjust the left m...

Use only soft cups in the cupholder. Hardobjects can injure you in a collision. Foglamp control (if equipped) Turn on the parkinglamps or the low-beamheadlamps. Press thetop portion of thefoglamp control,located on the centerconsole, to activate thefoglamps. The foglampLED will illuminate when the f...

3. Unclamp the top from the windshield header atboth the right and left sides by pulling each clamprearward until the hook in the windshield header isfree. The clamps are flush with the header when inthe closed position. 4. Close the windshield header clamps immediatelyafter disengagement, to avoid ...

Raising the convertible top The convertible top will not operate unless theparking brake is engaged. Do not raise the top whilethe vehicle is moving because the top may beseverely damaged. To raise the convertible top: 1. Bring the vehicle to a complete stop. Engage theparking brake. Key must be in ...

AUXILIARY POWER POINT The power point is anadditional powersource for electricalaccessories. TRACTION CONTROL Y This control can beused to turn theTraction Control y on or off. Refer to the Traction Control y section of the Driving chapter for moreinformation. OVERDRIVE CONTROL (IF EQUIPPED) Activat...

The transmission will operate in all gears exceptoverdrive. To return to normal overdrive mode, pressthe Transmission Control Switch again. The O/DOFF indicator light will no longer be illuminated. When you shut off and re-start your vehicle, thetransmission will automatically return to normal(Overd...

Sounding a panic alarm Press this control toactivate the alarm. To deactivate thealarm, press thecontrol again or turnthe ignition to ACC orON. This device complieswith part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to thefollowing two conditions: (1) This device ma...

used to purchase gasoline or similar items on thesame key ring as the PATS ignition key may causevehicle starting problems. If present, you need tokeep these objects from touching the PATS ignitionkey while starting the engine. These objects cannotdamage the PATS ignition key, but can cause amomenta...

SEATING Adjustable head restraints (if equipped) Your vehicle’s seats may be equipped with headrestraints which are vertically adjustable. Thepurpose of these head restraints is to help limit headmotion in the event of a rear collision. To properlyadjust your head restraints, lift the head restraint...

Lift handle to moveseat forward orbackward. Pull lever up to adjustseatback. Adjusting the front power seat (if equipped) Never adjust the driver’s seat or seatbackwhen the vehicle is moving. Do not pile cargo higher than the seatbacksto avoid injuring people in a collision or sudden stop. Always dr...

The control is located on the front outboard cornerof the driver’s seat. Press front to raise orlower the front portionof the seat cushion. Press rear to raise orlower the rear portionof the seat cushion. Press the control tomove the seat forward,backward, up or down. Using the power lumbar support ...

The rotating boot on the front seat belt is designedto allow rear seat entry/exit. To enter the rear seat: 1. Remove seat beltfrom seat belt holderon top of front seat. 2. Rotate the safetybelt boot rearward. 3. Enter the rear seat in front of the safety belt. 4. Rotate the safety belt boot forward ...

To reduce the risk of injury, make surechildren sit where they can be properly restrained. Never let a passenger hold a child on his orher lap while the vehicle is moving. The passenger cannot protect the child from injury in acollision. All occupants of the vehicle, including thedriver, should alwa...

Always transport children 12 years old andunder in the back seat and always properly use appropriate child restraints. Combination lap and shoulder belts Before fastening thesafety belt, make surethe shoulder beltpasses through the beltholder on the top ofthe seatback. Coupe shown,convertible is sim...

The front and rear outboard safety restraints in thevehicle are combination lap and shoulder belts. Thefront passenger and rear seat outboard safety beltshave two types of locking modes described below: Vehicle sensitive mode The vehicle sensitive mode is the normal retractormode, allowing free shou...

2. Wait until the safety belt warning light turns off.(Approximately 1–2 minutes) • Steps 3–5 must be completed within 60 secondsor the procedure will have to be repeated. 3. Buckle then unbuckle the safety belt three times,ending with the safety belt unbuckled. This can bedone before or during Belt...

• Recline the seat slightly (one or two degrees)from the upright position. Do not put anything on or over the air bagmodule. Placing objects on or over the air bag inflation area may cause those objects to bepropelled by the air bag into your face and torsocausing serious injury. Do not attempt to s...

Air bags can kill or injure a child in a childseat. NEVER place a rear-facing child seat in front of an active air bag. If you must use aforward-facing child seat in the front seat, movethe seat all the way back. How does the air bag supplemental restraintsystem work? The air bag SRS isdesigned to a...

amounts of sodium hydroxide may be present whichmay irritate the skin and eyes, but none of theresidue is toxic. While the system is designed to help reduce seriousinjuries, contact with a deploying air bag may alsocause abrasions, swelling or temporary hearing loss.Because air bags must inflate rap...

system wiring, the air bag system readiness light, theair bag back up power and the air bag ignitors. Determining if the system is operational The SRS uses a readiness light in the instrumentcluster or a tone to indicate the condition of thesystem. Refer to the Air bag readiness section in the Instr...

Do not leave children, unreliable adults, orpets unattended in your vehicle. To improve the fit of lap and shoulder belts onchildren who have outgrown child safety seats, Fordrecommends use of a belt-positioning booster seatthat is labelled as conforming to all Federal motorvehicle safety standards....

Child and infant or child safety seats Use a safety seat that is recommended for the sizeand weight of the child. Carefully follow all of themanufacturer’s instructions with the safety seat youput in your vehicle. If you do not install and use thesafety seat properly, the child may be injured in asu...

Carefully follow all of the manufacturer’sinstructions included with the safety seat you put in your vehicle. If you do not install anduse the safety seat properly, the child may beinjured in a sudden stop or collision. Installing child safety seats in combination lapand shoulder belt seating positi...

3. Locate the correctanchor for the selectedseating position asshown previously. For Coupe only: 4. Open the tetheranchor covers. 5. Clip the tether strapto the anchor asshown. For Convertible only: The tether anchors onthe convertible arelocated on the lowerbackside of theseatback. 4. Access tether...

PREPARING TO START YOUR VEHICLE Engine starting is controlled by the powertraincontrol system. This system meets all CanadianInterference-Causing Equipment standardrequirements regulating the impulse electrical fieldstrength of radio noise. When starting a fuel-injected engine, avoid pressingthe acc...

Important safety precautions A computer system controls the engine’s idlerevolutions per minute (RPM). When the enginestarts, the idle RPM runs faster to warm the engine.If the engine idle speed does not slow downautomatically, have the vehicle checked. Do notallow the vehicle to idle for more than ...

3. Turn the key to 4(ON) without turningthe key to 5 (START). If there is difficulty inturning the key, firmlyrotate the steeringwheel left and rightuntil the key turnsfreely. This condition may occur when: • front wheels are turned • front wheel is against the curb • steering wheel is turned when g...

If you ever smell exhaust fumes of any kindinside your vehicle, have your dealer inspect and fix your vehicle immediately. Do not drive ifyou smell exhaust fumes. These fumes are harmfuland could kill you. Have the exhaust and body ventilation systemschecked whenever: • the vehicle is raised for ser...

BRAKES Your service brakes are self-adjusting. Refer to thescheduled maintenance guide for scheduledmaintenance. Occasional brake noise is normal and often does notindicate a performance concern with the vehicle’sbrake system. In normal operation, automotive brakesystems may emit occasional or inter...

The ABS operates bydetecting the onset ofwheel lockup duringbrake applications andcompensates for thistendency. The wheelsare prevented fromlocking even when the brakes are firmly applied. Theaccompanying illustration depicts the advantage ofan ABS equipped vehicle (on bottom) to a non-ABSequipped v...

stopping distance. Always leave enough roombetween your vehicle and the vehicle in front ofyou to stop. • We recommend that you familiarize yourself withthis braking technique. However, avoid taking anyunnecessary risks. Hydraulic brake booster system (Hydroboost) The Hydroboost system receives flui...

(when the ignition is turned ON) until the parkingbrake is released. Always set the parking brake fully and makesure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (FirstGear) (manual transmission). The parking brake is not recommended to stop amoving vehicle. Ho...

STEERING Your vehicle is equipped with power steering. Powersteering uses energy from the engine to help steerthe vehicle. To prevent damage to the power steering pump: • Never hold the steering wheel to the extremeright or the extreme left for more than a fewseconds when the engine is running. • Do...

Understanding gearshift positions P (Park) Always come to acomplete stop beforeshifting into P (Park).Make sure the gearshiftlever is securelylatched in P (Park).This position locks thetransmission andprevents the rearwheels from turning. Always set the parking brake fully and makesure the gearshift...

(Overdrive) The normal drivingposition for the bestfuel economy.Transmission operatesin gears one throughfour. (Overdrive) can be deactivated by pressingthe transmissioncontrol switch on thegearshift lever. The transmissioncontrol indicator light(TCIL) will illuminateon the instrumentcluster. Drive ...

To return to (Overdrive) mode, press the transmission control switch. The O/D OFF indicatorwill no longer be illuminated. Each time the vehicle is started, the transmissionwill automatically return to normal overdrive mode. Every time the vehicle is shut off and restarted, youmust press the transmis...

MANUAL TRANSMISSION OPERATION(IF EQUIPPED) Using the clutch Vehicles equipped with a manual transmission have astarter interlock that prevents cranking the engineunless the clutch pedal is fully depressed. When starting a vehicle with a manual transmission,you must: 1. Make sure theparking brake is ...

• Do not drive with your foot resting on the clutchpedal and do not use the clutch to hold yourvehicle at a standstill while waiting on a hill.These actions will greatly reduce clutch life. Recommended shift speeds Do not downshift into 1 (first) when yourvehicle is moving faster then 24 km/h (15 mp...

4. Turn the ignition keyto position 3 (OFF). Do not park your vehicle in Neutral, it maymove unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully. Reverse You must be at a complete stop to shift into R(Reverse). You can shift into R (Reverse) only bymoving the gearshif...

If R (Reverse) is not engaged, push the clutchpedal down and put the gearshift back intoNeutral. Then, release the clutch pedal for amoment and repeat steps 3 through 6. Removing key from ignition • Turn the ignition keyto position 3 (OFF). • Push the releaselever forward androtate the keytowards yo...

• Trailer Weight Range: Specified weight range that the trailer must fall within that ranges fromzero to the maximum trailer weight rating. Remember to figure in the tongue load of yourloaded trailer when figuring the total weight. Do not exceed the GVWR or the GAWRspecified on the certification lab...

TRAILER TOWING Your vehicle is capable of towing a trailer up to 454kg (1 000 lbs.) gross trailer weight with a maximumtongue load of 45 kg (100 lbs.). Do not tow a traileruntil your vehicle has been driven at least 800 km(500 miles). Towing a trailer places an additional load on yourvehicle’s engin...

adjusted to the manufacturer’s specifications. Thetrailer brakes must meet local and Federalregulations. Do not connect a trailer’s hydraulic brakesystem directly to your vehicle’s brake system. Your vehicle may not have enough brakingpower and your chances of having a collisiongreatly increase. The...

ensure that your transmission is not damaged. • Place the transmission in N (Neutral). • Maximum speed is 56 km/h (35 mph). • Maximum distance is 80 km (50 miles). If a distance of 80 km (50 miles) or a speed of 56km/h (35 mph) must be exceeded, you mustdisconnect the driveshaft. Ford recommends the...

GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicleconcern, Ford offers a complimentary roadsideassistance program. This program is separate fromthe New Vehicle Limited Warranty. The service isavailable: • 24–hours, seven days a week • for the Basic warranty period (Canada) or ...

Should you need to arrange roadside assistance foryourself, Ford will reimburse a reasonable amount.To obtain information about reimbursement, call1-800-241-3673 in the United States for Ford orMercury vehicles; or if you own a Lincoln vehicle,call 1–800–521–4140. Call 1–800–665–2006 inCanada. Roads...

After a collision, if the engine cranks but does notstart, the fuel pump shut-off switch may have beenactivated. The fuel pump shut-offswitch is located onthe left side of thetrunk behind the trunkliner. Use the following procedure to reset the fuel pumpshut-off switch. 1. Turn the ignition to the O...

Check the appropriate fuses before replacing anyelectrical components. Always replace a fuse with one that has thespecified amperage rating. Using a fuse with a higher amperage rating can cause severe wiredamage and could start a fire. Standard fuse amperage rating and color COLOR Fuse Rating Mini F...

The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 1 20A Cigar Lighter 2 20A Engine Controls 3 — Not Used 4 10A RH Low Beam Headlamp 5 15A Instrument Cluster, TractionControl Switch 6 20A Starter Motor Relay 7 15A GEM, Interior Lamps 8 20...

Power distribution box The power distribution box is located in the enginecompartment. The power distribution box containshigh-current fuses that protect your vehicle’s mainelectrical systems from overloads. Always disconnect the battery beforeservicing high current fuses. Always replace the cover t...

The high-current fuses are coded as follows. Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description Relay 1 — Fog Lamp Interrupt Relay 2 — Int. Wiper Relay 3 — Wiper HI/LO Relay 4 — Starter Relay 5 — Fog Lamps 1 50A** (4.6L), 30A CB (3.8L) Electric Cooling Fan Motor 2 30A** Headlamps...

Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 25 — Not Used 26 30A** PCM 27 20A** DRL Module, Foglamp Relay 28 25A CB Convertible Top * Mini Fuses ** Maxi Fuses CHANGING THE TIRES If you get a flat tire while driving, do not apply thebrake heavily. Instead, gradually decreas...

• try to repair the temporary spare tire or remove itfrom its wheel • use the wheel for any other type of vehicle Tire change procedure To prevent the vehicle from moving whenyou change a tire, be sure the parking brake is set, then block (in both directions) the wheelthat is diagonally opposite (ot...

4. Loosen each wheellug nut one-half turncounterclockwise butdo not remove themuntil the wheel israised off the ground. 5. Put the jack in thejack notch next to thetire you are changing.Turn the jack handleclockwise until thewheel is completely offthe ground. Never use the reardifferential as ajacki...

8. Lower the wheel by turning the jack handlecounterclockwise. 9. Remove the jack andfully tighten the lugnuts in the ordershown. 10. Put flat tire, jackand lug wrench away.Make sure jack isfastened so it does notrattle when you drive. 11. Unblock the wheels. Anti-theft lug nuts (if equipped) If you...

2. Place the lug nut wrench over the lug nut key andapply pressure on the key with the wrench. 3. Install the lug nut. JUMP STARTING YOUR VEHICLE The gases around the battery can explode ifexposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicledamage. Do not push...

Connecting the jumper cables 1. Connect the positive (+) booster cable to thepositive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Connect the other end of the positive (+) cable tothe positive (+) term...

4. Make the final connection of the negative (-) cableto an exposed metal part of the stalled vehicle’s engine,away from the battery and the carburetor/fuel injectionsystem. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second c...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or, if you are a member,your roadside assistance center. It is recommended that your vehicle be towed with awheel lift or flatbed equipment. Do not tow with aslingbelt. Ford Motor Company has not approved as...

SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the enginecompartment for easy location. • We provide a Scheduled Maintenance Guide whichmakes tracking routine service easy. If your vehicle requires professional service, yourdealership can provide nec...

2. Turn off the engine and remove the key. 3. Block the wheels to prevent the vehicle frommoving unexpectedly. • Manual transmission: 1. Set the parking brake. 2. Depress the clutch and place the gearshift in 1(First). 3. Turn off the engine and remove the key. 4. Block the wheels to prevent the veh...

OPENING THE HOOD 1. Inside the vehicle,pull the hood releasehandle located underthe bottom left cornerof the instrumentpanel. 2. Go to the front of the vehicle and release theauxiliary latch that is located under the front centerof the hood. 3. Lift the hood and secure it with the prop rod. HOOD Mai...

3. Set the parking brake and ensure the gearshift issecurely latched in P (Park) (automatictransmissions) or 1 (First) (manual transmissions). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil levelindicator (dipstick). • 3.8L OHV V6 engine • 4.6L SOH...

• 3.8L OHV V6 engine • 4.6L SOHC V8 engine • Oil levels above the MAX mark may cause enginedamage. Some oil must be removed from theengine by a service technician. 7. Put the indicator back in and ensure it is fullyseated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checkin...

4. Install the indicator and ensure it is fully seated. 5. Fully install the engine oil filler cap by turning thefiller cap clockwise until three clicks can be heard. To avoid possible oil loss, DO NOT operate thevehicle with the engine oil level indicatorand/or the engine oil filler cap removed. En...

WINDSHIELD WASHER FLUID Checking and adding washer fluid Check the washer fluidwhenever you stop forfuel. The reservoir ishighlighted with asymbol. If the level is low, addenough fluid to fill thereservoir. In very coldweather, do not fill thereservoir all the way. Only use a washer fluid that meets...

A 50/50 mixture of distilled water and Ford Premium Engine Coolant provides: • maximum cooling system efficiency. • freeze protection down to -36° C (-34° F). • boiling protection up to 129° C (265° F). • protection against rust and other forms ofcorrosion. • an accurate temperature readout from the...

When the engine is cold, check the level of theengine coolant in the reservoir. • The engine coolant should be at the “cold filllevel” as listed on the engine coolant reservoir. • Refer to the Scheduled Maintenance Guide forservice interval schedules. • Be sure to read and understand Precautions whe...

• DO NOT MIX recycled coolant andconventional coolant together in yourvehicle. Mixing of engine coolants may harmyour engine’s cooling system. • The use of an improper coolant may harmengine and cooling system components andmay void the warranty of your vehicle’sengine cooling system. If you are uns...

Have your dealer check the engine cooling systemfor leaks if you have to add more than 1.0 liter (1.0quart) of engine coolant per month. If equipped with the 3.8L V6 engine, toavoid scalding hot steam or coolant from being released from the engine cooling system,never remove the radiator cap from th...

which can be purchased from your dealer. Engine coolant refill procedure-3.8L V6 engine Use the following procedure when refillingthe cooling system of a vehicle equipped with a 3.8L V6 engine. Failure to follow thiswarning may result in damage to the engine andengine cooling system. The following p...

12. Add a 50/50 mixture of engine coolant and distilled water to the radiator until full. 13. Reinstall the radiator cap. 14. Check the coolant level in the reservoir beforeyou drive your vehicle the next few times (with theengine cool). 15. If necessary, add a 50/50 mixture of engine coolant and di...

9. Check the coolant level in the reservoir beforeyou drive your vehicle the next few times (with theengine cool). 10. If necessary, add a 50/50 mixture of engine coolant and distilled water to the engine coolantreservoir until the coolant level is at the “cold filllevel” as listed on the reservoir....

protection characteristics of the enginecoolant and may cause engine damage. • refer to the chart on the coolant containerto ensure the coolant concentration in yourvehicle will provide adequate freezeprotection at the temperatures in which youdrive in the winter months. If you drive in extremely ho...

If your vehicle isequipped with the3.8L V6 engine, check the power steeringfluid level with theengine at normaloperating temperature. 1. Start the engine andlet it run until itreaches normaloperating temperature(the engine coolanttemperature gaugeindicator will be nearthe center of thenormal area be...

If your vehicle isequipped with a 4.6LV8 engine, check the power steering fluidlevel with the engine atambient temperature.Allow at least one-halfhour after driving forthe power steeringfluid to cool. 1. Start the engine andallow the engine toidle. 2. Turn the steeringwheel left and rightseveral tim...

been operated for an extended period at highspeeds, in city traffic during hot weather or pulling atrailer, the vehicle should be turned off for about 30minutes to allow fluid to cool before checking. 1. Drive the vehicle 30 km (20 miles) or until itreaches normal operating temperature. 2. Park the ...

You can check the fluid without driving if theambient temperature is above 10°C (50°F). However,if fluid is added at this time, an overfill conditioncould result when the vehicle reaches normaloperating temperature. The transmission fluidshould be in this rangeif at normal operatingtemperature (66°C...

An overfill condition of transmission fluid maycause shift and/or engagement concerns and/orpossible damage. Checking and adding manual transmission fluid 1. Clean the filler plug. 2. Remove the fillerplug and inspect thefluid level. 3. Fluid level should beat bottom of theopening. 4. Add enough flu...

BATTERY Your vehicle isequipped with aMotorcraftmaintenance-freebattery which normallydoes not requireadditional water duringits life of service. However, for severe usage or in high temperatureclimates, check the battery electrolyte level. Refer tothe Scheduled Maintenance Guide for the serviceinte...

3. Run the engine until it reaches normal operatingtemperature. 4. Allow the engine to idle for at least one minute. 5. Turn the A/C on and allow the engine to idle forat least one minute. 6. Drive the vehicle to complete the relearningprocess. • The vehicle may need to be driven 16 km (10miles) or ...

windshield wiper solution or a mild detergent. Rinsethoroughly with clean water. To avoid damaging theblades, do not use fuel, kerosene, paint thinner orother solvents. Changing the wiper blades To replace the wiper blades: 1. Pull the wiper armaway from thewindshield and lockinto the servicepositio...

Temperature A B C The temperature grades are A (the highest), B, andC, representing the tire’s resistance to thegeneration of heat and its ability to dissipate heatwhen tested under controlled conditions on aspecified indoor laboratory test wheel. Sustainedhigh temperature can cause the material of ...

When replacing full size tires, never mixradial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the tirepressure decal. Make sure that all tires are thesame size, speed rating, and load-carrying capacity.Use only the tire combinations recommended onthe label. If you do no...

chains. Use chains on the tires only in an emergencyor if the law requires them. Follow these guidelines when using snow tires andchains: • Chains may damage aluminum wheels. • Use only Cable Type chains with size P225/55R16or 245/45ZR17 tires. Use of SAE Class S chainsmay damage vehicle. • SAE Clas...

The fuel system may be under pressure. Ifthe fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops beforecompletely removing the fuel filler cap. Otherwise,fuel may spray out and injure you or others. If you do not use the proper fuel filler cap,excessive pressure or v...

Use the following guidelines to avoid static build-upwhen filling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in thevehicle. • Keep the fuel pump nozzle in contact with thefuel container while filling. • DO NOT use a device ...

If you have run out of fuel: • You may need to cycle the ignition from OFF toON several times after refueling, to allow the fuelsystem to pump the fuel from the tank to theengine. • Your “Service Engine Soon” indicator may comeon. For more information on the “Service EngineSoon” indicator, refer to ...

The advertised capacity is the amount of theindicated capacity and the empty reserve combined.Indicated capacity is the difference in the amount offuel in a full tank and a tank when the fuel gaugeindicates empty. Empty reserve is the small amountof usable fuel remaining in the fuel tank after thefu...

4. Subtract your initial odometer reading from thecurrent odometer reading. 5. Follow one of the simple calculations in order todetermine fuel economy: Multiply liters used by 100, then divide by totalkilometers traveled. Divide total miles traveled by total gallonsused. Keep a record for at least o...

• Revving the engine before turning it off mayreduce fuel economy. • Using the air conditioner or defroster may reducefuel economy. • You may want to turn off the speed control inhilly terrain if unnecessary shifting between thirdand fourth gear occurs. Unnecessary shifting ofthis type could result ...

• Using fuel blended with alcohol may lower fueleconomy. • Fuel economy may decrease with lowertemperatures during the first 12–16 km (8–10miles) of driving. • Driving on flat terrain offers improved fueleconomy as compared to driving on hilly terrain. • Transmissions give their best fuel economy wh...

• Have the items listed in your ScheduledMaintenance Guide performed according to thespecified schedule. The scheduled maintenance items listed in theScheduled Maintenance Guide are essential to thelife and performance of your vehicle and to itsemissions system. If other than Ford, Motorcraft or For...

Please consult your “Warranty Guide” for completeemission warranty information. Readiness for Inspection/Maintenance (I/M)testing In some localities, it may be a legal requirement topass an I/M test of the on-board diagnostics system.If your “Check Engine/Service Engine Soon” light ison, refer to th...

• Turn signals • Backup lamps • License plate lamp Do not remove lamp bulbs unless they will bereplaced immediately. If a bulb is removed for anextended period of time, contaminants may enterthe lamp housings and affect performance. Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure ...

6. Without turning,remove the old bulbfrom the lampassembly by gentlypulling it straight out ofthe lamp assembly. To install the new bulb: Handle a halogen headlamp bulb carefullyand keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch theglass. The oil from your ha...

2. Open the hood. 3. At the back of theheadlamp, pull tworetainer pins up torelease the headlampassembly. 4. Pull headlampassembly forwarddisengaging the lampfrom the rear snap retainers to expose the back ofthe bulb. 5. Rotate the bulbsocketcounterclockwise andremove from lampassembly. 6. Carefully...

Replacing foglamp bulbs The halogen bulb contains gas under pressure.The bulb may shatter if the glass envelope isscratched or if the bulb is dropped. Handle thebulb carefully. Grasp the bulb only by its base.Avoid touching the glass envelope. 1. Rotate the foglampbulb counterclockwiseand remove fro...

• interior overhead lamp • map lamp For bulb replacement, see a dealer or qualifiedtechnician. Map lamps For bulb replacement, see a qualified servicetechnician or your dealer. Using the right bulbs Replacement bulbs are specified in the chart below.Headlamp bulbs must be marked with an authorized“D...

3. On the wall orscreen you will observea light pattern with adistinct horizonal edgeof high intensity light.If this edge is not atthe horizontal reference line, the beam will need tobe adjusted. 4. Locate the vertical adjuster on each headlamp,then use a 6 mm allen wrench or screwdriver to turnthe ...

Any gasoline spilled on the vehicle or deposits suchas bird droppings should be washed and sponged offas soon as possible. Deposits not removed promptlycan cause damage to the vehicle’s paintwork. Remove any exterior accessories, such as antennas,before entering a car wash. If you have wax appliedto...

Cleaning the wiper blades, windshield and rearwindow If the wiper blades do not wipe properly, clean thewiper blade rubber element with undilutedwindshield washer solution or a mild detergent. Toavoid damaging the blades, do not use fuel,kerosene, paint thinner or other solvents. If the wiper still ...

• Do not spray with cold water to avoid crackingthe engine block or other engine components. • Never apply anything to the drive belt (includingbelt dressing). • Cover the highlighted areas to prevent waterdamage when cleaning the engine. • Never wash or rinse the engine while it isrunning; water in...

Cleaning seats equipped with side air bags Remove dust and loose dirt with a whisk broom or avacuum cleaner. Remove fresh spots immediately.Follow the directions that come with the cleaner. Donot saturate the seat cover with upholstery cleaner. Do not use chemical solvents or strongdetergents when c...

Cleaning leather seats (if equipped) To clean, simply use a soft cloth dampened withwater and a mild soap. Wipe the leather again with adamp cloth to remove soap residue. Dry with a softcloth. For tougher soiling concerns, Fordrecommends using the Deluxe Leather Care KitF8AZ-19G253–AA, which is avai...

MOTORCRAFT PART NUMBERS Component 3.8L OHV V6 engine 4.6L SOHC V8 engine Air filter element FA-1611 FA-1634 Fuel filter FG-800AFG-986 FG-800AFG-986 Battery BXT-59 BXT-59 Oil filter FL-400S FL-820S PCV valve EV-152 EV-98 Spark plugs* AWSF-42EE** AWSF-32P * Refer to Vehicle Emissions Control Informati...

LUBRICANT SPECIFICATIONS Item Ford part name Ford partnumber Fordspecification Brake fluid High PerformanceDOT 3 MotorVehicle BrakeFluid C6AZ-19542-AB ESA-M6C25-Aand DOT 3 Doorweatherstrips Silicone Lubricant F7AZ-19G208-BAandF5AZ-19553-AA ESR-M13P4-A Door latch, hoodlatch, auxiliaryhood latch, door...

1 Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for completerefill of Traction-Lok axles. Ford design rear axles contain a synthetic lubricant that does notrequire changing unless the axle has been submerged in water. 2 Ensure th...

Ford Extended Service Plan You can get more protection for your new car orlight truck by purchasing Ford Extended ServicePlan (Ford ESP) coverage. Ford ESP is an optionalservice contract which is backed by Ford MotorCompany or Ford Motor Service Company (in theU.S.) and Ford of Canada (in Canada). I...

Ford Motor CompanyCustomer Assistance Center16800 Executive Plaza DriveP.O. Box 6248Dearborn, Michigan 481211-800-392-3673 (FORD)(TDD for the hearing impaired: 1-800-232-5952) In Canada:Customer Assistance CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-367...

What kinds of cases does the Board review? Unresolved warranty repair concerns or vehicleperformance as designed concerns on Ford andLincoln Mercury cars and Ford and Lincoln Mercurylight trucks which are within the terms of anyapplicable written new vehicle warranty are eligiblefor review, except t...

Board membership The Board consists of: • three consumer representatives • a Ford or Lincoln Mercury dealershiprepresentative Consumer candidates for Board membership arerecruited and trained by an independent consultingfirm. The dealership Board member is chosen fromFord and Lincoln Mercury dealers...

• the name of the dealer(s) who sold or servicedthe vehicle • a brief description of your unresolved concern • a brief summary of the action taken by thedealer(s) and Ford Motor Company • the names (if known) of all the people youcontacted at the dealership(s) • a description of the action you expec...

To Request a DSB Brochure/Application For a brochure/application, speak to your dealer orwrite/call to the Board at the followingaddress/phone number: Dispute Settlement BoardP.O. Box 5120Southfield, MI 48086–51201–800–428–3718 You may also contact the North American CustomerAssistance Center at 1-8...

Ford Deluxe Leather and Vinyl Cleaner (notavailable in Canada) Motorcraft Vinyl Cleaner (Canada only) Ford Extra Strength Tar and Road Oil Remover*(not available in Canada) Ford Extra Strength Upholstery Cleaner (Canadaonly) Ford Extra Strength Upholstery Cleaner (notavailable in Canada) Ford Metal ...

garage door openers and other transmitters withoutputs of five watts or less will not ordinarilyaffect your vehicle’s operation.) • Ford cannot assume responsibility for any adverseeffects or damage that may result from the use ofsuch equipment. ORDERING ADDITIONAL OWNER’SLITERATURE To order the pub...

REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that yourvehicle has a defectthat could cause acrash, or could causeinjury or death, youshould immediatelyinform the NationalHighway Traffic SafetyAdministration(NHTSA) in addition to notifying Ford MotorCompany. If NHTSA receives similar complaint...

Air bag supplementalrestraint system ... 75,76 and childsafety seats ............. 77description .............. 76disposal .................... 80driver air bag .......... 78indicator light ...... 9,80operation ................. 78passenger air bag ... 78 Air cleaner filter ..... 191Air conditioning...

GAWR (Gross AxleWeight Rating) ........ 109 definition ............... 109driving witha heavy load .......... 109location .................. 109 GVWR (Gross VehicleWeight Rating) ........ 109 calculating ............. 109definition ............... 109driving witha heavy load .......... 109location ....

warning light andchime ............... 8,13,70 Safety seatsfor children ........... 82,83Seat belts (see Safetyrestraints) .................. 65Seats .......................... 62 child safetyseats .................... 82,83cleaning .......... 189,190easy access/easyoutfeature ..................... ...

Item Information Required fuel Unleaded fuel only - 87 octane Fuel tank capacity 59.4L (15.7 gallons) Engine oil capacity(includes filterchange) 4.7L (5.0 quarts). Use Motorcraft SAE5W-30 Super Premium Motor Oil,Ford specification WSS-M2C153-G Tire size andpressure See label on inside of glove box d...

WARNING LIGHTS AND CHIMESBase instrument cluster Optional instrument cluster Turn signal Illuminates when theleft or right turn signalor the hazard lights areturned on. If one orboth of the indicators stay on continuously or flashfaster, check for a burned-out turn signal bulb. Referto Exterior bulb...

position to remind you to fasten your safety belts.For more information, refer to the Seating and safety restraints chapter. Charging system Illuminates when theignition is turned tothe ON position andthe engine is off. Thelight also illuminates when the battery is notcharging properly, requiring el...

to check the bulb. If it comes on after the engine isstarted, one of the engine’s emission control systemsmay be malfunctioning. The light may illuminatewithout a driveability concern being noted. Thevehicle will usually be drivable and will not requiretowing. What you should do if the Service Engin...

Under engine misfire conditions, excessiveexhaust temperatures could damage the catalytic converter, the fuel system, interior floorcoverings or other vehicle components, possiblycausing a fire. Low fuel Illuminates as an earlyreminder of a low fuelcondition indicated onthe fuel gauge (refer to Fuel...

Traction Control Y active Momentarilyilluminates when theignition is turned toON. It also illuminateswhen the Traction Control y system begins applying and releasing the brakes and adjusting the enginecharacteristics to limit a wheelspin condition. It willbe lit for a minimum of four seconds or for ...

added. This lamp will also illuminate when theignition is turned to ON and the engine is off. Formore information on adding engine coolant, refer to Engine coolant in the Maintenance and care chapter. Safety belt warning chime Sounds to remind you to fasten your safety belts. For information on the ...

Optional instrument cluster gauges Fuel gauge Displays approximatelyhow much fuel is in thefuel tank (when thekey is in the ONposition). The fuel gauge may vary slightly when thevehicle is in motion. The ignition should be in theOFF position while the vehicle is being refueled.When the gauge first i...

This gauge indicates the temperature of the enginecoolant, not the coolant level. If the coolant is not atits proper level the gauge indication will not beaccurate. Speedometer Indicates the current vehicle speed. • Base instrumentcluster • Optional instrumentcluster Odometer Registers the totalkilo...

Engine oil pressure gauge This shows the engineoil pressure in thesystem. Sufficientpressure exists as longas the needle remains in the normal range (the areabetween the “L” and “H”). If the gauge indicates low pressure, stop the vehicleas soon as safely possible and switch off the engineimmediately...

HEADLAMP CONTROL • Pull the headlampcontrol toward youto the first positionto turn on theparking lamps, taillamps, license platelamps and markerlamps. • Pull the headlamp control toward you to the outerposition to turn on the headlamps (in addition tothe previous lamps). Daytime running lamps (DRL) ...

PANEL DIMMER CONTROL To adjust thebrightness of theinstrument panel: • Rotate clockwise/counterclockwisewhen the headlampcontrol is in theparking lamp or low-beam position. To turn on the courtesy lamps: • Rotate fully counterclockwise. REAR WINDOW DEFROSTER(IF EQUIPPED) The rear defrostercontrol is...

CLIMATE CONTROL SYSTEM Manual heating and air conditioning system Fan speed control Controls the volume ofair circulated in thevehicle. Temperature control knob Controls thetemperature of theairflow inside thevehicle. Mode selector control Controls the directionof the airflow to theinside of the veh...

faster. Airflow will be from the instrument panelregisters. This mode can also be used to reduceundesirable odors from entering the vehicle. • A/C-Uses outside air to cool the vehicle. It isquieter than MAX A/C but not as economical.Airflow will be from the instrument panelregisters. • (Panel)-Distr...

Operating tips • In humid weather, select before driving. This will reduce fogging on your windshield. Aftera few minutes, select any desired position. • To reduce humidity buildup inside the vehicle,don’t drive with the climate control system in theOFF or MAX A/C position. • Don’t put objects under...

USING YOUR AUDIO SYSTEM AM/FM Stereo/Cassette/Premium Sound Power control Press the control toturn the audio systemon or off. Volume control Press the control toraise or lower volume. If the volume is setabove a certain level and the ignition is turned off,the volume will come back on at a “nominal”...

Tune adjust in radio mode Tune adjust allows youto tune in a particularradio station. You canmanually locate thestation by using the Automatic Music Search (AMS)button. • Press the AMS control until the display showsTUNE. • Press and releaseeither or on the SEEK control tochange to the next frequenc...

• Press to listen to the previousselection on thetape. • Press to listen to the next selection on the tape. The tape deck stops and returns to play mode whenthe AMS circuit senses a blank section on the tape.In order to ensure proper operation of the AMSfeature, the tape MUST have a blank section of...

held in memory on the control you selected. Repeat the steps for each station memory presetbutton you want to set. If the battery is disconnected, the memory presetstations will need to be reset. Bass adjust The bass adjust control allows you to increase ordecrease the audio system’s bass output. • ...

• Press the (+) side ofthe volume controlto shift sound to theright speakers. • Press the (−) side of the volume control to shiftsound to the left speakers. Speaker fade adjust Speaker sound distribution can be adjusted betweenthe front and rear speakers. • Push the AUDIOcontrol repeatedlyuntil the ...

Tape eject Press the control tostop and eject a tape. Dolby T noise reduction Dolby t noise reduction reduces the amount ofhiss and static duringtape playback. Press the control to activate (and deactivate) Dolby t noise reduction. Dolby t noise reduction is manufactured under license from Dolby t L...

Power control Press the control toturn the audio systemon or off. Volume control Press the control toraise or lower volume. If the volume is setabove a certain level and the ignition is turned off,the volume will come back on at a “nominal”listening level when the ignition switch is turnedback on. I...

Use the SEEK buttonto scan up or down thefrequency band. • Press to find the next listenable station down the frequency band. • Press to find the next listenable station up the frequency band. Scan function in tape mode This feature allows youto scan the tapecurrently playing,stopping on eachselecti...

• Press the (+) side ofthe volume controlto shift sound to theright speakers. • Press the (−) side of the volume control to shiftsound to the left speakers. Speaker fade adjust Speaker sound distribution can be adjusted betweenthe front and rear speakers. • Push the AUDIOcontrol repeatedlyuntil the ...

Press the control tofast forward the tape. Once the end of thetape is reached, tapedirection reverses and the opposite side of the tapeplays. Tape eject Press the control tostop and eject a tape. Dolby T noise reduction Dolby t noise reduction reduces the amount ofhiss and static duringtape playback...

Single Disc CD Player Power and volume control The compact disc player operates when the audiosystem is on and a CD is inserted (label side up). The volume is controlled by the VOLUME control onthe audio system. Play function The system enters thePLAY mode when a CDis loaded, label side up,into the ...

approximately eight seconds. This continues untilyou press the SCAN control a second time or ejectthe CD. While in the scan mode, the display flashesSCAN. Reverse/fast forward To quickly search for aparticular point in aselection, press theright side of the REV/FF control (to fast forward) orthe lef...

Shuffle feature The shuffle featureplays all tracks on thecurrent CD in randomorder. Press the SHUFFLE control to start this feature.Random order play will continue until the control ispressed again. Eject Push the EJECTcontrol to stop CD play,eject the CD, andresume radio or tapeoperation. Troubles...

Cleaning compact discs Inspect all discs for contamination before playing. Ifnecessary, clean discs only with an approved CDcleaner and wipe from the center out to the edge.Do not use circular motion. CD and CD player care • Handle discs by their edges only. Never touch theplaying surface. • Do not ...

and FM stations may use for their broadcasts.Allowable frequencies are: AM 530, 540–1600, 1610 kHz FM 87.7, 87.9–107.7, 107.9 MHz Not all frequencies are used in a given area. Radio reception factors Three factors can affect radio reception: • Distance/strength. The further an FM signal travels, the...

Never adjust the steering wheel when thevehicle is moving. SPEED CONTROL To turn speed control on • Press ON. Vehicle speed cannotbe controlled until thevehicle is traveling ator above 48 km/h (30mph). Do not use the speed control in heavy trafficor on roads that are winding, slippery, or unpaved. D...

POWER WINDOWS Press and hold the rocker switches to open andclose windows. • Press the top portionof the rocker switchto close. • Press the bottomportion of the rockerswitch to open. Express down To make the driverwindow open fullywithout holding thewindow control, pressthe driver windowcontrol comp...

for the driver’s press the control. Press the controlagain to restore the window controls. POWER DOOR LOCKS Press U to unlock alldoors and L to lock alldoors. POWER SIDE VIEW MIRRORS (IF EQUIPPED) To adjust your mirrors: 1. Move the mirror selector control all the way tothe left to adjust the left m...

Use only soft cups in the cupholder. Hardobjects can injure you in a collision. Foglamp control (if equipped) Turn on the parkinglamps or the low-beamheadlamps. Press thetop portion of thefoglamp control,located on the centerconsole, to activate thefoglamps. The foglampLED will illuminate when the f...

3. Unclamp the top from the windshield header atboth the right and left sides by pulling each clamprearward until the hook in the windshield header isfree. The clamps are flush with the header when inthe closed position. 4. Close the windshield header clamps immediatelyafter disengagement, to avoid ...

Raising the convertible top The convertible top will not operate unless theparking brake is engaged. Do not raise the top whilethe vehicle is moving because the top may beseverely damaged. To raise the convertible top: 1. Bring the vehicle to a complete stop. Engage theparking brake. Key must be in ...

AUXILIARY POWER POINT The power point is anadditional powersource for electricalaccessories. TRACTION CONTROL Y This control can beused to turn theTraction Control y on or off. Refer to the Traction Control y section of the Driving chapter for moreinformation. OVERDRIVE CONTROL (IF EQUIPPED) Activat...

The transmission will operate in all gears exceptoverdrive. To return to normal overdrive mode, pressthe Transmission Control Switch again. The O/DOFF indicator light will no longer be illuminated. When you shut off and re-start your vehicle, thetransmission will automatically return to normal(Overd...

Sounding a panic alarm Press this control toactivate the alarm. To deactivate thealarm, press thecontrol again or turnthe ignition to ACC orON. This device complieswith part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to thefollowing two conditions: (1) This device ma...

used to purchase gasoline or similar items on thesame key ring as the PATS ignition key may causevehicle starting problems. If present, you need tokeep these objects from touching the PATS ignitionkey while starting the engine. These objects cannotdamage the PATS ignition key, but can cause amomenta...

SEATING Adjustable head restraints (if equipped) Your vehicle’s seats may be equipped with headrestraints which are vertically adjustable. Thepurpose of these head restraints is to help limit headmotion in the event of a rear collision. To properlyadjust your head restraints, lift the head restraint...

Lift handle to moveseat forward orbackward. Pull lever up to adjustseatback. Adjusting the front power seat (if equipped) Never adjust the driver’s seat or seatbackwhen the vehicle is moving. Do not pile cargo higher than the seatbacksto avoid injuring people in a collision or sudden stop. Always dr...

The control is located on the front outboard cornerof the driver’s seat. Press front to raise orlower the front portionof the seat cushion. Press rear to raise orlower the rear portionof the seat cushion. Press the control tomove the seat forward,backward, up or down. Using the power lumbar support ...

The rotating boot on the front seat belt is designedto allow rear seat entry/exit. To enter the rear seat: 1. Remove seat beltfrom seat belt holderon top of front seat. 2. Rotate the safetybelt boot rearward. 3. Enter the rear seat in front of the safety belt. 4. Rotate the safety belt boot forward ...

To reduce the risk of injury, make surechildren sit where they can be properly restrained. Never let a passenger hold a child on his orher lap while the vehicle is moving. The passenger cannot protect the child from injury in acollision. All occupants of the vehicle, including thedriver, should alwa...

Always transport children 12 years old andunder in the back seat and always properly use appropriate child restraints. Combination lap and shoulder belts Before fastening thesafety belt, make surethe shoulder beltpasses through the beltholder on the top ofthe seatback. Coupe shown,convertible is sim...

The front and rear outboard safety restraints in thevehicle are combination lap and shoulder belts. Thefront passenger and rear seat outboard safety beltshave two types of locking modes described below: Vehicle sensitive mode The vehicle sensitive mode is the normal retractormode, allowing free shou...

2. Wait until the safety belt warning light turns off.(Approximately 1–2 minutes) • Steps 3–5 must be completed within 60 secondsor the procedure will have to be repeated. 3. Buckle then unbuckle the safety belt three times,ending with the safety belt unbuckled. This can bedone before or during Belt...

• Recline the seat slightly (one or two degrees)from the upright position. Do not put anything on or over the air bagmodule. Placing objects on or over the air bag inflation area may cause those objects to bepropelled by the air bag into your face and torsocausing serious injury. Do not attempt to s...

Air bags can kill or injure a child in a childseat. NEVER place a rear-facing child seat in front of an active air bag. If you must use aforward-facing child seat in the front seat, movethe seat all the way back. How does the air bag supplemental restraintsystem work? The air bag SRS isdesigned to a...

amounts of sodium hydroxide may be present whichmay irritate the skin and eyes, but none of theresidue is toxic. While the system is designed to help reduce seriousinjuries, contact with a deploying air bag may alsocause abrasions, swelling or temporary hearing loss.Because air bags must inflate rap...

system wiring, the air bag system readiness light, theair bag back up power and the air bag ignitors. Determining if the system is operational The SRS uses a readiness light in the instrumentcluster or a tone to indicate the condition of thesystem. Refer to the Air bag readiness section in the Instr...

Do not leave children, unreliable adults, orpets unattended in your vehicle. To improve the fit of lap and shoulder belts onchildren who have outgrown child safety seats, Fordrecommends use of a belt-positioning booster seatthat is labelled as conforming to all Federal motorvehicle safety standards....

Child and infant or child safety seats Use a safety seat that is recommended for the sizeand weight of the child. Carefully follow all of themanufacturer’s instructions with the safety seat youput in your vehicle. If you do not install and use thesafety seat properly, the child may be injured in asu...

Carefully follow all of the manufacturer’sinstructions included with the safety seat you put in your vehicle. If you do not install anduse the safety seat properly, the child may beinjured in a sudden stop or collision. Installing child safety seats in combination lapand shoulder belt seating positi...

3. Locate the correctanchor for the selectedseating position asshown previously. For Coupe only: 4. Open the tetheranchor covers. 5. Clip the tether strapto the anchor asshown. For Convertible only: The tether anchors onthe convertible arelocated on the lowerbackside of theseatback. 4. Access tether...

PREPARING TO START YOUR VEHICLE Engine starting is controlled by the powertraincontrol system. This system meets all CanadianInterference-Causing Equipment standardrequirements regulating the impulse electrical fieldstrength of radio noise. When starting a fuel-injected engine, avoid pressingthe acc...

Important safety precautions A computer system controls the engine’s idlerevolutions per minute (RPM). When the enginestarts, the idle RPM runs faster to warm the engine.If the engine idle speed does not slow downautomatically, have the vehicle checked. Do notallow the vehicle to idle for more than ...

3. Turn the key to 4(ON) without turningthe key to 5 (START). If there is difficulty inturning the key, firmlyrotate the steeringwheel left and rightuntil the key turnsfreely. This condition may occur when: • front wheels are turned • front wheel is against the curb • steering wheel is turned when g...

If you ever smell exhaust fumes of any kindinside your vehicle, have your dealer inspect and fix your vehicle immediately. Do not drive ifyou smell exhaust fumes. These fumes are harmfuland could kill you. Have the exhaust and body ventilation systemschecked whenever: • the vehicle is raised for ser...

BRAKES Your service brakes are self-adjusting. Refer to thescheduled maintenance guide for scheduledmaintenance. Occasional brake noise is normal and often does notindicate a performance concern with the vehicle’sbrake system. In normal operation, automotive brakesystems may emit occasional or inter...

The ABS operates bydetecting the onset ofwheel lockup duringbrake applications andcompensates for thistendency. The wheelsare prevented fromlocking even when the brakes are firmly applied. Theaccompanying illustration depicts the advantage ofan ABS equipped vehicle (on bottom) to a non-ABSequipped v...

stopping distance. Always leave enough roombetween your vehicle and the vehicle in front ofyou to stop. • We recommend that you familiarize yourself withthis braking technique. However, avoid taking anyunnecessary risks. Hydraulic brake booster system (Hydroboost) The Hydroboost system receives flui...

(when the ignition is turned ON) until the parkingbrake is released. Always set the parking brake fully and makesure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (FirstGear) (manual transmission). The parking brake is not recommended to stop amoving vehicle. Ho...

STEERING Your vehicle is equipped with power steering. Powersteering uses energy from the engine to help steerthe vehicle. To prevent damage to the power steering pump: • Never hold the steering wheel to the extremeright or the extreme left for more than a fewseconds when the engine is running. • Do...

Understanding gearshift positions P (Park) Always come to acomplete stop beforeshifting into P (Park).Make sure the gearshiftlever is securelylatched in P (Park).This position locks thetransmission andprevents the rearwheels from turning. Always set the parking brake fully and makesure the gearshift...

(Overdrive) The normal drivingposition for the bestfuel economy.Transmission operatesin gears one throughfour. (Overdrive) can be deactivated by pressingthe transmissioncontrol switch on thegearshift lever. The transmissioncontrol indicator light(TCIL) will illuminateon the instrumentcluster. Drive ...

To return to (Overdrive) mode, press the transmission control switch. The O/D OFF indicatorwill no longer be illuminated. Each time the vehicle is started, the transmissionwill automatically return to normal overdrive mode. Every time the vehicle is shut off and restarted, youmust press the transmis...

MANUAL TRANSMISSION OPERATION(IF EQUIPPED) Using the clutch Vehicles equipped with a manual transmission have astarter interlock that prevents cranking the engineunless the clutch pedal is fully depressed. When starting a vehicle with a manual transmission,you must: 1. Make sure theparking brake is ...

• Do not drive with your foot resting on the clutchpedal and do not use the clutch to hold yourvehicle at a standstill while waiting on a hill.These actions will greatly reduce clutch life. Recommended shift speeds Do not downshift into 1 (first) when yourvehicle is moving faster then 24 km/h (15 mp...

4. Turn the ignition keyto position 3 (OFF). Do not park your vehicle in Neutral, it maymove unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully. Reverse You must be at a complete stop to shift into R(Reverse). You can shift into R (Reverse) only bymoving the gearshif...

If R (Reverse) is not engaged, push the clutchpedal down and put the gearshift back intoNeutral. Then, release the clutch pedal for amoment and repeat steps 3 through 6. Removing key from ignition • Turn the ignition keyto position 3 (OFF). • Push the releaselever forward androtate the keytowards yo...

• Trailer Weight Range: Specified weight range that the trailer must fall within that ranges fromzero to the maximum trailer weight rating. Remember to figure in the tongue load of yourloaded trailer when figuring the total weight. Do not exceed the GVWR or the GAWRspecified on the certification lab...

TRAILER TOWING Your vehicle is capable of towing a trailer up to 454kg (1 000 lbs.) gross trailer weight with a maximumtongue load of 45 kg (100 lbs.). Do not tow a traileruntil your vehicle has been driven at least 800 km(500 miles). Towing a trailer places an additional load on yourvehicle’s engin...

adjusted to the manufacturer’s specifications. Thetrailer brakes must meet local and Federalregulations. Do not connect a trailer’s hydraulic brakesystem directly to your vehicle’s brake system. Your vehicle may not have enough brakingpower and your chances of having a collisiongreatly increase. The...

ensure that your transmission is not damaged. • Place the transmission in N (Neutral). • Maximum speed is 56 km/h (35 mph). • Maximum distance is 80 km (50 miles). If a distance of 80 km (50 miles) or a speed of 56km/h (35 mph) must be exceeded, you mustdisconnect the driveshaft. Ford recommends the...

GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicleconcern, Ford offers a complimentary roadsideassistance program. This program is separate fromthe New Vehicle Limited Warranty. The service isavailable: • 24–hours, seven days a week • for the Basic warranty period (Canada) or ...

Should you need to arrange roadside assistance foryourself, Ford will reimburse a reasonable amount.To obtain information about reimbursement, call1-800-241-3673 in the United States for Ford orMercury vehicles; or if you own a Lincoln vehicle,call 1–800–521–4140. Call 1–800–665–2006 inCanada. Roads...

After a collision, if the engine cranks but does notstart, the fuel pump shut-off switch may have beenactivated. The fuel pump shut-offswitch is located onthe left side of thetrunk behind the trunkliner. Use the following procedure to reset the fuel pumpshut-off switch. 1. Turn the ignition to the O...

Check the appropriate fuses before replacing anyelectrical components. Always replace a fuse with one that has thespecified amperage rating. Using a fuse with a higher amperage rating can cause severe wiredamage and could start a fire. Standard fuse amperage rating and color COLOR Fuse Rating Mini F...

The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 1 20A Cigar Lighter 2 20A Engine Controls 3 — Not Used 4 10A RH Low Beam Headlamp 5 15A Instrument Cluster, TractionControl Switch 6 20A Starter Motor Relay 7 15A GEM, Interior Lamps 8 20...

Power distribution box The power distribution box is located in the enginecompartment. The power distribution box containshigh-current fuses that protect your vehicle’s mainelectrical systems from overloads. Always disconnect the battery beforeservicing high current fuses. Always replace the cover t...

The high-current fuses are coded as follows. Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description Relay 1 — Fog Lamp Interrupt Relay 2 — Int. Wiper Relay 3 — Wiper HI/LO Relay 4 — Starter Relay 5 — Fog Lamps 1 50A** (4.6L), 30A CB (3.8L) Electric Cooling Fan Motor 2 30A** Headlamps...

Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 25 — Not Used 26 30A** PCM 27 20A** DRL Module, Foglamp Relay 28 25A CB Convertible Top * Mini Fuses ** Maxi Fuses CHANGING THE TIRES If you get a flat tire while driving, do not apply thebrake heavily. Instead, gradually decreas...

• try to repair the temporary spare tire or remove itfrom its wheel • use the wheel for any other type of vehicle Tire change procedure To prevent the vehicle from moving whenyou change a tire, be sure the parking brake is set, then block (in both directions) the wheelthat is diagonally opposite (ot...

4. Loosen each wheellug nut one-half turncounterclockwise butdo not remove themuntil the wheel israised off the ground. 5. Put the jack in thejack notch next to thetire you are changing.Turn the jack handleclockwise until thewheel is completely offthe ground. Never use the reardifferential as ajacki...

8. Lower the wheel by turning the jack handlecounterclockwise. 9. Remove the jack andfully tighten the lugnuts in the ordershown. 10. Put flat tire, jackand lug wrench away.Make sure jack isfastened so it does notrattle when you drive. 11. Unblock the wheels. Anti-theft lug nuts (if equipped) If you...

2. Place the lug nut wrench over the lug nut key andapply pressure on the key with the wrench. 3. Install the lug nut. JUMP STARTING YOUR VEHICLE The gases around the battery can explode ifexposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicledamage. Do not push...

Connecting the jumper cables 1. Connect the positive (+) booster cable to thepositive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Connect the other end of the positive (+) cable tothe positive (+) term...

4. Make the final connection of the negative (-) cableto an exposed metal part of the stalled vehicle’s engine,away from the battery and the carburetor/fuel injectionsystem. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second c...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or, if you are a member,your roadside assistance center. It is recommended that your vehicle be towed with awheel lift or flatbed equipment. Do not tow with aslingbelt. Ford Motor Company has not approved as...

SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the enginecompartment for easy location. • We provide a Scheduled Maintenance Guide whichmakes tracking routine service easy. If your vehicle requires professional service, yourdealership can provide nec...

2. Turn off the engine and remove the key. 3. Block the wheels to prevent the vehicle frommoving unexpectedly. • Manual transmission: 1. Set the parking brake. 2. Depress the clutch and place the gearshift in 1(First). 3. Turn off the engine and remove the key. 4. Block the wheels to prevent the veh...

OPENING THE HOOD 1. Inside the vehicle,pull the hood releasehandle located underthe bottom left cornerof the instrumentpanel. 2. Go to the front of the vehicle and release theauxiliary latch that is located under the front centerof the hood. 3. Lift the hood and secure it with the prop rod. HOOD Mai...

3. Set the parking brake and ensure the gearshift issecurely latched in P (Park) (automatictransmissions) or 1 (First) (manual transmissions). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil levelindicator (dipstick). • 3.8L OHV V6 engine • 4.6L SOH...

• 3.8L OHV V6 engine • 4.6L SOHC V8 engine • Oil levels above the MAX mark may cause enginedamage. Some oil must be removed from theengine by a service technician. 7. Put the indicator back in and ensure it is fullyseated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checkin...

4. Install the indicator and ensure it is fully seated. 5. Fully install the engine oil filler cap by turning thefiller cap clockwise until three clicks can be heard. To avoid possible oil loss, DO NOT operate thevehicle with the engine oil level indicatorand/or the engine oil filler cap removed. En...

WINDSHIELD WASHER FLUID Checking and adding washer fluid Check the washer fluidwhenever you stop forfuel. The reservoir ishighlighted with asymbol. If the level is low, addenough fluid to fill thereservoir. In very coldweather, do not fill thereservoir all the way. Only use a washer fluid that meets...

A 50/50 mixture of distilled water and Ford Premium Engine Coolant provides: • maximum cooling system efficiency. • freeze protection down to -36° C (-34° F). • boiling protection up to 129° C (265° F). • protection against rust and other forms ofcorrosion. • an accurate temperature readout from the...

When the engine is cold, check the level of theengine coolant in the reservoir. • The engine coolant should be at the “cold filllevel” as listed on the engine coolant reservoir. • Refer to the Scheduled Maintenance Guide forservice interval schedules. • Be sure to read and understand Precautions whe...

• DO NOT MIX recycled coolant andconventional coolant together in yourvehicle. Mixing of engine coolants may harmyour engine’s cooling system. • The use of an improper coolant may harmengine and cooling system components andmay void the warranty of your vehicle’sengine cooling system. If you are uns...

Have your dealer check the engine cooling systemfor leaks if you have to add more than 1.0 liter (1.0quart) of engine coolant per month. If equipped with the 3.8L V6 engine, toavoid scalding hot steam or coolant from being released from the engine cooling system,never remove the radiator cap from th...

which can be purchased from your dealer. Engine coolant refill procedure-3.8L V6 engine Use the following procedure when refillingthe cooling system of a vehicle equipped with a 3.8L V6 engine. Failure to follow thiswarning may result in damage to the engine andengine cooling system. The following p...

12. Add a 50/50 mixture of engine coolant and distilled water to the radiator until full. 13. Reinstall the radiator cap. 14. Check the coolant level in the reservoir beforeyou drive your vehicle the next few times (with theengine cool). 15. If necessary, add a 50/50 mixture of engine coolant and di...

9. Check the coolant level in the reservoir beforeyou drive your vehicle the next few times (with theengine cool). 10. If necessary, add a 50/50 mixture of engine coolant and distilled water to the engine coolantreservoir until the coolant level is at the “cold filllevel” as listed on the reservoir....

protection characteristics of the enginecoolant and may cause engine damage. • refer to the chart on the coolant containerto ensure the coolant concentration in yourvehicle will provide adequate freezeprotection at the temperatures in which youdrive in the winter months. If you drive in extremely ho...

If your vehicle isequipped with the3.8L V6 engine, check the power steeringfluid level with theengine at normaloperating temperature. 1. Start the engine andlet it run until itreaches normaloperating temperature(the engine coolanttemperature gaugeindicator will be nearthe center of thenormal area be...

If your vehicle isequipped with a 4.6LV8 engine, check the power steering fluidlevel with the engine atambient temperature.Allow at least one-halfhour after driving forthe power steeringfluid to cool. 1. Start the engine andallow the engine toidle. 2. Turn the steeringwheel left and rightseveral tim...

been operated for an extended period at highspeeds, in city traffic during hot weather or pulling atrailer, the vehicle should be turned off for about 30minutes to allow fluid to cool before checking. 1. Drive the vehicle 30 km (20 miles) or until itreaches normal operating temperature. 2. Park the ...

You can check the fluid without driving if theambient temperature is above 10°C (50°F). However,if fluid is added at this time, an overfill conditioncould result when the vehicle reaches normaloperating temperature. The transmission fluidshould be in this rangeif at normal operatingtemperature (66°C...

An overfill condition of transmission fluid maycause shift and/or engagement concerns and/orpossible damage. Checking and adding manual transmission fluid 1. Clean the filler plug. 2. Remove the fillerplug and inspect thefluid level. 3. Fluid level should beat bottom of theopening. 4. Add enough flu...

BATTERY Your vehicle isequipped with aMotorcraftmaintenance-freebattery which normallydoes not requireadditional water duringits life of service. However, for severe usage or in high temperatureclimates, check the battery electrolyte level. Refer tothe Scheduled Maintenance Guide for the serviceinte...

3. Run the engine until it reaches normal operatingtemperature. 4. Allow the engine to idle for at least one minute. 5. Turn the A/C on and allow the engine to idle forat least one minute. 6. Drive the vehicle to complete the relearningprocess. • The vehicle may need to be driven 16 km (10miles) or ...

windshield wiper solution or a mild detergent. Rinsethoroughly with clean water. To avoid damaging theblades, do not use fuel, kerosene, paint thinner orother solvents. Changing the wiper blades To replace the wiper blades: 1. Pull the wiper armaway from thewindshield and lockinto the servicepositio...

Temperature A B C The temperature grades are A (the highest), B, andC, representing the tire’s resistance to thegeneration of heat and its ability to dissipate heatwhen tested under controlled conditions on aspecified indoor laboratory test wheel. Sustainedhigh temperature can cause the material of ...

When replacing full size tires, never mixradial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the tirepressure decal. Make sure that all tires are thesame size, speed rating, and load-carrying capacity.Use only the tire combinations recommended onthe label. If you do no...

chains. Use chains on the tires only in an emergencyor if the law requires them. Follow these guidelines when using snow tires andchains: • Chains may damage aluminum wheels. • Use only Cable Type chains with size P225/55R16or 245/45ZR17 tires. Use of SAE Class S chainsmay damage vehicle. • SAE Clas...

The fuel system may be under pressure. Ifthe fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops beforecompletely removing the fuel filler cap. Otherwise,fuel may spray out and injure you or others. If you do not use the proper fuel filler cap,excessive pressure or v...

Use the following guidelines to avoid static build-upwhen filling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in thevehicle. • Keep the fuel pump nozzle in contact with thefuel container while filling. • DO NOT use a device ...

If you have run out of fuel: • You may need to cycle the ignition from OFF toON several times after refueling, to allow the fuelsystem to pump the fuel from the tank to theengine. • Your “Service Engine Soon” indicator may comeon. For more information on the “Service EngineSoon” indicator, refer to ...

The advertised capacity is the amount of theindicated capacity and the empty reserve combined.Indicated capacity is the difference in the amount offuel in a full tank and a tank when the fuel gaugeindicates empty. Empty reserve is the small amountof usable fuel remaining in the fuel tank after thefu...

4. Subtract your initial odometer reading from thecurrent odometer reading. 5. Follow one of the simple calculations in order todetermine fuel economy: Multiply liters used by 100, then divide by totalkilometers traveled. Divide total miles traveled by total gallonsused. Keep a record for at least o...

• Revving the engine before turning it off mayreduce fuel economy. • Using the air conditioner or defroster may reducefuel economy. • You may want to turn off the speed control inhilly terrain if unnecessary shifting between thirdand fourth gear occurs. Unnecessary shifting ofthis type could result ...

• Using fuel blended with alcohol may lower fueleconomy. • Fuel economy may decrease with lowertemperatures during the first 12–16 km (8–10miles) of driving. • Driving on flat terrain offers improved fueleconomy as compared to driving on hilly terrain. • Transmissions give their best fuel economy wh...

• Have the items listed in your ScheduledMaintenance Guide performed according to thespecified schedule. The scheduled maintenance items listed in theScheduled Maintenance Guide are essential to thelife and performance of your vehicle and to itsemissions system. If other than Ford, Motorcraft or For...

Please consult your “Warranty Guide” for completeemission warranty information. Readiness for Inspection/Maintenance (I/M)testing In some localities, it may be a legal requirement topass an I/M test of the on-board diagnostics system.If your “Check Engine/Service Engine Soon” light ison, refer to th...

• Turn signals • Backup lamps • License plate lamp Do not remove lamp bulbs unless they will bereplaced immediately. If a bulb is removed for anextended period of time, contaminants may enterthe lamp housings and affect performance. Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure ...

6. Without turning,remove the old bulbfrom the lampassembly by gentlypulling it straight out ofthe lamp assembly. To install the new bulb: Handle a halogen headlamp bulb carefullyand keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch theglass. The oil from your ha...

2. Open the hood. 3. At the back of theheadlamp, pull tworetainer pins up torelease the headlampassembly. 4. Pull headlampassembly forwarddisengaging the lampfrom the rear snap retainers to expose the back ofthe bulb. 5. Rotate the bulbsocketcounterclockwise andremove from lampassembly. 6. Carefully...

Replacing foglamp bulbs The halogen bulb contains gas under pressure.The bulb may shatter if the glass envelope isscratched or if the bulb is dropped. Handle thebulb carefully. Grasp the bulb only by its base.Avoid touching the glass envelope. 1. Rotate the foglampbulb counterclockwiseand remove fro...

• interior overhead lamp • map lamp For bulb replacement, see a dealer or qualifiedtechnician. Map lamps For bulb replacement, see a qualified servicetechnician or your dealer. Using the right bulbs Replacement bulbs are specified in the chart below.Headlamp bulbs must be marked with an authorized“D...

3. On the wall orscreen you will observea light pattern with adistinct horizonal edgeof high intensity light.If this edge is not atthe horizontal reference line, the beam will need tobe adjusted. 4. Locate the vertical adjuster on each headlamp,then use a 6 mm allen wrench or screwdriver to turnthe ...

Any gasoline spilled on the vehicle or deposits suchas bird droppings should be washed and sponged offas soon as possible. Deposits not removed promptlycan cause damage to the vehicle’s paintwork. Remove any exterior accessories, such as antennas,before entering a car wash. If you have wax appliedto...

Cleaning the wiper blades, windshield and rearwindow If the wiper blades do not wipe properly, clean thewiper blade rubber element with undilutedwindshield washer solution or a mild detergent. Toavoid damaging the blades, do not use fuel,kerosene, paint thinner or other solvents. If the wiper still ...

• Do not spray with cold water to avoid crackingthe engine block or other engine components. • Never apply anything to the drive belt (includingbelt dressing). • Cover the highlighted areas to prevent waterdamage when cleaning the engine. • Never wash or rinse the engine while it isrunning; water in...

Cleaning seats equipped with side air bags Remove dust and loose dirt with a whisk broom or avacuum cleaner. Remove fresh spots immediately.Follow the directions that come with the cleaner. Donot saturate the seat cover with upholstery cleaner. Do not use chemical solvents or strongdetergents when c...

Cleaning leather seats (if equipped) To clean, simply use a soft cloth dampened withwater and a mild soap. Wipe the leather again with adamp cloth to remove soap residue. Dry with a softcloth. For tougher soiling concerns, Fordrecommends using the Deluxe Leather Care KitF8AZ-19G253–AA, which is avai...

MOTORCRAFT PART NUMBERS Component 3.8L OHV V6 engine 4.6L SOHC V8 engine Air filter element FA-1611 FA-1634 Fuel filter FG-800AFG-986 FG-800AFG-986 Battery BXT-59 BXT-59 Oil filter FL-400S FL-820S PCV valve EV-152 EV-98 Spark plugs* AWSF-42EE** AWSF-32P * Refer to Vehicle Emissions Control Informati...

LUBRICANT SPECIFICATIONS Item Ford part name Ford partnumber Fordspecification Brake fluid High PerformanceDOT 3 MotorVehicle BrakeFluid C6AZ-19542-AB ESA-M6C25-Aand DOT 3 Doorweatherstrips Silicone Lubricant F7AZ-19G208-BAandF5AZ-19553-AA ESR-M13P4-A Door latch, hoodlatch, auxiliaryhood latch, door...

1 Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for completerefill of Traction-Lok axles. Ford design rear axles contain a synthetic lubricant that does notrequire changing unless the axle has been submerged in water. 2 Ensure th...

Ford Extended Service Plan You can get more protection for your new car orlight truck by purchasing Ford Extended ServicePlan (Ford ESP) coverage. Ford ESP is an optionalservice contract which is backed by Ford MotorCompany or Ford Motor Service Company (in theU.S.) and Ford of Canada (in Canada). I...

Ford Motor CompanyCustomer Assistance Center16800 Executive Plaza DriveP.O. Box 6248Dearborn, Michigan 481211-800-392-3673 (FORD)(TDD for the hearing impaired: 1-800-232-5952) In Canada:Customer Assistance CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-367...

What kinds of cases does the Board review? Unresolved warranty repair concerns or vehicleperformance as designed concerns on Ford andLincoln Mercury cars and Ford and Lincoln Mercurylight trucks which are within the terms of anyapplicable written new vehicle warranty are eligiblefor review, except t...

Board membership The Board consists of: • three consumer representatives • a Ford or Lincoln Mercury dealershiprepresentative Consumer candidates for Board membership arerecruited and trained by an independent consultingfirm. The dealership Board member is chosen fromFord and Lincoln Mercury dealers...

• the name of the dealer(s) who sold or servicedthe vehicle • a brief description of your unresolved concern • a brief summary of the action taken by thedealer(s) and Ford Motor Company • the names (if known) of all the people youcontacted at the dealership(s) • a description of the action you expec...

To Request a DSB Brochure/Application For a brochure/application, speak to your dealer orwrite/call to the Board at the followingaddress/phone number: Dispute Settlement BoardP.O. Box 5120Southfield, MI 48086–51201–800–428–3718 You may also contact the North American CustomerAssistance Center at 1-8...

Ford Deluxe Leather and Vinyl Cleaner (notavailable in Canada) Motorcraft Vinyl Cleaner (Canada only) Ford Extra Strength Tar and Road Oil Remover*(not available in Canada) Ford Extra Strength Upholstery Cleaner (Canadaonly) Ford Extra Strength Upholstery Cleaner (notavailable in Canada) Ford Metal ...

garage door openers and other transmitters withoutputs of five watts or less will not ordinarilyaffect your vehicle’s operation.) • Ford cannot assume responsibility for any adverseeffects or damage that may result from the use ofsuch equipment. ORDERING ADDITIONAL OWNER’SLITERATURE To order the pub...

REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that yourvehicle has a defectthat could cause acrash, or could causeinjury or death, youshould immediatelyinform the NationalHighway Traffic SafetyAdministration(NHTSA) in addition to notifying Ford MotorCompany. If NHTSA receives similar complaint...

Air bag supplementalrestraint system ... 75,76 and childsafety seats ............. 77description .............. 76disposal .................... 80driver air bag .......... 78indicator light ...... 9,80operation ................. 78passenger air bag ... 78 Air cleaner filter ..... 191Air conditioning...

GAWR (Gross AxleWeight Rating) ........ 109 definition ............... 109driving witha heavy load .......... 109location .................. 109 GVWR (Gross VehicleWeight Rating) ........ 109 calculating ............. 109definition ............... 109driving witha heavy load .......... 109location ....

warning light andchime ............... 8,13,70 Safety seatsfor children ........... 82,83Seat belts (see Safetyrestraints) .................. 65Seats .......................... 62 child safetyseats .................... 82,83cleaning .......... 189,190easy access/easyoutfeature ..................... ...

Item Information Required fuel Unleaded fuel only - 87 octane Fuel tank capacity 59.4L (15.7 gallons) Engine oil capacity(includes filterchange) 4.7L (5.0 quarts). Use Motorcraft SAE5W-30 Super Premium Motor Oil,Ford specification WSS-M2C153-G Tire size andpressure See label on inside of glove box d...