Ford 1999 Taurus- Manuals

1 Introduction Ford’s Commitment to You At Ford Motor Company, excellence is thecontinuous commitment to achieve the best resultpossible. It is dedication to learning what you want,determination to develop the right concept, andexecution of that concept with care, precision, andattention to detail. ...

2 Things to Know About Using ThisGuide Congratulations on the purchase of your newvehicle. This guide has information about theequipment and the options for your new vehicle.You may not have bought all of the optionsavailable to you. If you do not know whichinformation applies to your vehicle, talk ...

3 To use the Index , turn to the back of the book and search in the alphabetical listing for the wordthat best describes the information you need. If theword you chose is not listed, think of other relatedwords and look them up. We have designed theIndex so that you can find information under atechn...

4 Ford Extended Service Plan More Protection for Your Vehicle You can get more protection for your new car orlight truck by purchasing a Ford Extended ServicePlan (Ford ESP). Ford ESP is the only extendedservice program with the Ford name on it and theonly service contract backed by Ford MotorCompan...

5 Breaking Your Vehicle In Your new vehicle goes through an adjustment orbreak-in period during the first 1,000 miles(1,600 km) that you drive it. During the break-inperiod, you need to pay careful attention to howyou drive your vehicle. ❑ Avoid sudden stops. Because your vehicle has new brake linin...

7 Instrumentation The instrument panel (dashboard) on your vehicle isdivided into several different sections. Theillustrations on the following pages show the majorparts of the instrument panel that are described inthis chapter. Some items shown may not be on allvehicles. The main controls for the c...

8 The Instrument Panel File:03fnis8.ex Update:Thu Jun 27 10:00:37 1996

9 The Instrument Cluster File:03fnis8.ex Update:Thu Jun 27 10:00:37 1996

10 Indicator Lights and Chimes Brake System Warning Light The warning light for the brakes can show twothings — that the parking brake is not fullyreleased, or that the brake fluid level is low in themaster cylinder reservoir. If the fluid level is low,the brake system should be checked by your deal...

11 Anti-Lock Brake System Warning Light This light comes on for a few seconds when youturn the ignition key to the START position. Itshould go off shortly after the engine starts. If itstays on longer than five (5) seconds, it indicatesthat your anti-lock brake system may not beworking properly. Nor...

12 4. If the level is low, add only as much oil asnecessary before you start the engine again. Donot overfill. Do not operate the engine if thelight is on, regardless of the oil level. Contactyour nearest dealer for further service actions. For more information about adding oil, see Adding engine oi...

15 Chime for Headlamps On This chime sounds if the driver or any passengerdoor is open when the parking lamps or headlampsare on. The chime sounds until you close the door,turn off the lamps or turn the ignition to the ONposition. Redundant Electronic Gearshift Indicator The redundant electronic gea...

16 The Instrument Cluster In addition to warning lights, the instrument clusterhas an electronic odometer, a speedometer,tachometer, fuel and coolant temperature gauges. Odometer The odometer tells you the total number of miles(kilometers) your vehicle has been driven. Speedometer The speedometer Th...

17 Tachometer The tachometer The tachometer displays the approximate enginerevolutions per minute (rpm), or how fast theengine is running. You can drive your vehicle at most rpm points onthe tachometer but you must stay out of the redzone. Engine Coolant Temperature Gauge This gauge indicates the te...

18 The pointer moves from the C (cold) mark into theNORMAL band as the engine coolant warms up. Itis acceptable for the pointer to fluctuate within theNORMAL band under normal driving conditions.Under certain driving conditions such as, heavy stopand go traffic, or driving up hills in hot weather,th...

19 Fuel Gauge The fuel gauge displays approximately how muchfuel you have in the fuel tank. For a proper fuel gauge indication after adding fuel,the ignition switch should be in the OFF positionwhile the vehicle is being refueled. The fuel gauge indicator may vary slightly while thevehicle is in mot...

20 ❑ Continuous warning reporting of monitoredsystems You can select different features for the M/C todisplay by using the keyboard directly below theM/C display. You will hear a tone when you pressone of these controls. However, if the M/C detectsa warning from any of the monitored systems thenthe ...

21 Vehicle Settings Menu A press of the VEHICLE SETTINGS control causesthe Message Center to display the menu featureswhich affect the vehicle regardless of which driverpersonality profile is currently selected. Repeatedpressing of the VEHICLE SETTINGS control allowsquick cycling through the menu fe...

22 ❑ OIL CHANGE RESET — This option allows you to reset the oil monitoring system to 100%(or your Personalized Oil Reset Percentage) aftereach oil change. The RESET control must bepressed and held for 5 seconds while thedisplay counts down to trigger an oil changereset. After a successful reset the ...

23 4. Press the VEHICLE SETTINGS control tocomplete the procedure. A press of any controlbesides RESET or VEHICLE SETTINGS willabort the procedure and will not establish anew Personalized Oil Reset Percentage. When your Personalized Oil Reset Percentage hasbeen established, it will be used beginning...

24 ❑ PHONE SCREEN — (if equipped with a factory phone) when a call is placed,information about the call is displayed in themessage center. Fuel Range A press of the RANGE switch allows you to displayapproximately how many miles (kilometers) you candrive before you run out of fuel. To ensure accuracy...

26 Reset A press of the RESET control will allow you toreset the current feature being displayed. Warnings,Average Fuel Economy, Clock Set, CompassAdjustment, Vehicle Settings, and Driver Settingsare the only features which respond to the RESETcontrol. Range and Instantaneous Fuel Economycannot be r...

27 O Press DATE/TIME repeatedly to select thecorrect month of the year. O Then press RESET to proceed to the dateadjustment display. O Press DATE/TIME repeatedly to select thecorrect day of the month. O Then press RESET to complete theset/adjustment procedure. ❑ Time Only Display — A second press of...

28 O To START the Elapsed Time count when itis stopped without resetting the counter,briefly press the reset control for less than 2seconds. O To reset the elapsed time counter, hold thereset control down until the count reads00:00:00 (about 2 seconds). Compass Pressing the COMPASS control will disp...

29 ❑ Traction Control (If equipped) ❑ Fuel Level At normal conclusion of the system check sequence,the M/C will display the last displayed featurebefore pressing the SYSTEM CHECK control or thewarnings that are active. For two of the systems reported in the systemcheck (Engine Oil Life Left and Fuel...

30 Vehicle System Status Displays These messages are displayed on the MessageCenter when the operator uses one of the vehiclesystems below, or the operation of a vehicle systemoccurs. ❑ PHONE SCREEN — This display will show the status of the cellular phone usage (if thevehicle is equipped with the f...

31 System Warnings System warnings alert you to possible problems ormalfunctions in your vehicle’s operating systems.There are 23 warning messages which can bedisplayed by the Message Center to show the statusof the monitored systems. When a warning occurs,the warning message is displayed and a tone...

33 DRIVER’S DOOR AJAR — This warning message is displayed when the driver’s door is notcompletely closed and the ignition switch is eitherON or in ACC mode. RIGHT DOOR AJAR — This warning message is displayed when the right (passenger side) door isnot completely closed and the ignition switch iseith...

35 CHECK TRANS-MISSION — This warning message is displayed when the transmission is notoperating properly. If this warning stays on orcomes on, contact your dealer for transmissionservice as soon as safely possible. TRANS-MISSION OVERHEAT — This warning message is displayed when the transmission iso...

37 AIR RIDE SWITCH OFF — This warning message is displayed when the AIR SUSPENSION SERVICESWITCH is in the OFF position. The air suspensionservice switch is located in the vehicle trunk in thejack stowage area on the left side. For moreinformation refer to the Air Suspension section in the Driving c...

38 OIL CHANGE RESET PROCEDURE — Thisprocedure allows you to reset the oil monitoringsystem to 100% (or your Personalized Oil ResetPercentage) after each oil change. 1. Press the VEHICLE SETTINGS control until the“OIL CHANGE RESET” display appears. 2. Then press the RESET switch and hold it for 5seco...

39 Function/Status Error Messages For some functions displayed by the MessageCenter, there will be error messages displayed,instead of the requested information, if thatinformation is not currently available because ofimproper operation of sensor systems, or the vehiclenetwork communication between ...

40 Factors Affecting Compass Accuracy Magnetic mounted devices (antennas, racks, etc.)should not be located on the front third of thevehicle roof. Placement of these devices near thecompass will cause the compass to be inaccurate. Ifthese devices are used, for improved accuracy,recalibrate the compa...

41 Set zone variation adjustment 1. Press and hold the COMPASS control, press theRESET control. Next, release both controls. Thedisplay will show: 2. Press the ENGLISH/METRIC control to enterthe Set Zone mode. The display will nowshow: NOTE: The display shows “##” (where ## is a number from 1-15) wh...

42 4. Press the RESET control until the numbershown in the display is the correct number forthe zone you are in. When the zone numberreaches 15, pressing the RESET control will setthe zone number to 1. 5. Press the COMPASS control to complete thezone setting. (To exit this mode without settinga zone...

43 Calibration Procedure 1. Find an open, level area free from steelstructures and high voltage lines. An empty,level parking lot is recommended. 2. Press and hold the COMPASS control, thenpress the RESET control. Next, release bothcontrols. The display will show: 3. Press the RESET control to enter...

46 If the light fails to illuminate, continues to flash,remains on, or you hear a beeping sound, have thesystem serviced at your Ford or Lincoln-Mercurydealer immediately. Overdrive Off Indicator This light tells you that the Transmission ControlSwitch on the gearshift lever has been pushed.When the...

47 If the light does not come ON when the TCS isdepressed or if the light FLASHES when you aredriving, have your vehicle serviced at the firstopportunity. If this condition persists, damage couldoccur to the transmission. Anti-Theft Alarm Light This light is used when you set the anti-theft alarmsys...

48 Traction Control Off Light This light tells you that the traction control systemhas been turned off using the Vehicle Settings menuin the Message Center. The traction control systemdefaults to “ON” (light is not illuminated) wheneverthe vehicle is shut off and restarted. File:03fnis8.ex Update:Th...

49 Electronic Sound Systems Premium Stereo Cassette File:04fnas8.ex Update:Wed Jun 19 10:43:44 1996

50 Premium Stereo Cassette and Stereo Cassette with CD DJ File:04fnas8.ex Update:Wed Jun 19 10:43:44 1996

51 Premium Stereo Cassette, StereoCassette with CD DJ andPremium Compact Disc Radio Your vehicle is equipped with either a premiumstereo cassette radio or a premium compact discradio. Both systems are available with a JBL H upgrade system, which includes a Ford 10-CDchanger. Individual functions of ...

53 Follow the easy steps below to set these buttons tothe desired frequencies: 1. Select a band, then select a frequency. 2. Press one of the memory preset buttons andhold the button until the sound returns. Thatstation is now held in memory on that button. 3. Follow the two steps above for each sta...

54 ❑ Increasing or decreasing treble response Press the top c of the “TREBLE” button to increase treble; press the bottom d of the treble button to decrease treble. ❑ Adjusting speaker balance Balance control allows you to adjust the sounddistribution between the right and left speakers.Press the to...

55 NOTE: A cassette tape can be loaded with the ignition on whether or not the radio power is on.However, with radio power off, the cassette tape isloaded and stored. NOTE: Noise reduction system manufactured under license from Dolby Labs Licensing Corporation.“Dolby” and double-D symbol are tradema...

56 To stop the scan mode on the presently sampledtape selection, press “SCAN” a second time. ❑ How to change the side of the tape beingplayed The alternate side of the tape can be selected bypressing the “SIDE 1-2” button. How to eject the tape To stop the tape and eject the cassette, press the“EJ” ...

57 ❑ Protect cassettes from exposure to directsunlight, high humidity and extreme heat orcold. If they are exposed to extreme conditions,allow them to reach a moderate temperaturebefore playing. ❑ If a tape is loose inside the cassette, tighten itbefore playing by putting your finger or a pencilinto...

58 Ho w to take care of and clean the CDplaye r and discs To ensure the continued performance of your CDplayer, carefully read the following precautions: ❑ Always handle a disc by the edge. Never touchthe playing surface. ❑ Before playing, inspect all discs for anycontamination. If needed, clean dis...

59 — CD-ER 0001 — Disc upside down or unreadable. — CD-ER INIT — Mechanism disconnected or malfunctioning. — CD-ER 0002 — Eject error. — CD-ER 0100 — Computer CD loaded. — CD-ER ____ (other codes) — Mechanism malfunctions. Ford 10-CD Changer (If equipped) Introduction The 10-CD Changer Unit is mount...

61 Figure 4 NOTE: To remove one or more compact disc(s) from the disc magazine, push the correspondinglever(s) (numbered 1 to 10 on the side of the discmagazine) to the left. Disc(s) will partially come outfor easy removal. 5. Close unit by sliding changer panel door to theleft. The Compact Disc Cha...

64 ❑ Before playing, inspect all discs for anycontamination. If needed, clean discs with anapproved disc cleaner, such as the Discwasher H Compact Disc Cleaner or the Allsop 3 H Compact Disc Cleaner, by wiping from thecenter out to the edges. Do not use a circularmotion to clean. ❑ Do not clean disc...

65 Common Operating Conditions of the CD Player The following information is designed to help yourecognize typical situations that could be mistakenlyinterpreted as mechanical malfunctions of the discplayer. ❑ A disc is already loaded. ❑ The disc is inserted with the label surfacedownward. ❑ The dis...

67 To minimize these conditions, a stereo/mono blendcircuit has been incorporated into this system. Thisfeature automatically switches a weak stereo signalto a clearer monaural signal, which improves thequality of reception. Several sources of static are normal conditions onAM frequencies. These can...

69 Controls and Features The Climate Control System Electronic Automatic Temperature Control System The Electronic Automatic Temperature Control(EATC) module is located at the center of theinstrument panel and operates only when the key isin the ON position. The EATC feature maintains the temperatur...

70 The automatic temperature control system To turn your EATC on, push the AUTOMATICbutton or any of the six override buttons along thebottom of the control. To turn your EATC off, press the OFF button.When the system is off, the display window will beblank (dark). If you select AUTOMATIC, the syste...

72 When in AUTOMATIC and weather conditionsrequire heat, air will be sent to the floor. But, afeature is included in your EATC to preventblowing cold air to the floor if the engine coolant isnot warm enough to allow heating. In 3-1/2minutes or less, the fan speed will start to increaseand the airflo...

74 You can override the fan speed at any time. If youuse the thumbwheel to override the fan speed, theEATC will continue to control the temperature butyou control the fan speed. To return to auto fancontrol, press the AUTOMATIC button. If you areoperating in one of the override functions (FLOOR,MAX ...

76 FLR O DEF button Push this button to get air to the floor andwindshield defrosters at the same time. The displaywill show the set temperature, FLR and the Defrostsymbol. If the outside temperature is about 50˚F(10˚C) and above, the air will be dehumidified toremove moisture. This will help to pre...

77 ❑ To prevent humidity buildup inside yourvehicle, always drive with the EATC Systemturned on. ❑ Do not put objects under the front seats thatinterfere with the flow of air to the back seatarea. ❑ Remove any snow, ice, or leaves from the airintake area of your EATC System which couldblock the air ...

78 The button that controls the rear windowdefroster and heated outside rearview mirrors Before using the defroster, clear away any snowthat is on the rear window and outside rearviewmirrors. With the engine running, push thedefroster button. After approximately 10 minutes, the defroster willturn of...

79 NOTE: If you have a vehicle with an automatic lighting system, the DRL system is active until theautomatic system turns on the headlamps. NOTE: You may notice that the lights flicker when the vehicle is turned on or off. This is a normalcondition. WARNING The Daytime Running Light (DRL)system wil...

80 Setting the Autolamp On/Off Delay System By using the autolamp, you can set the headlampsto: ❑ turn on the lamps automatically at night ❑ turn off the lamps automatically during daylight ❑ keep the lamps on for up to three minutes afteryou turn the key to OFF. The controls for the autolamp To use...

81 3. Rotate the headlamp control counterclockwisefrom the OFF position. NOTE: The Message Center will display the amount of time that has been set for the autolampto turn off the headlamps after turning the key tooff. 4. The autolamp will automatically turn the lampson and off for you. Do not put a...

82 The thumbwheel that controls the light on theinstrument panel and the interior light To dim the instrument panel lights, rotate thePANEL DIM thumbwheel down. To turn on theinterior lights, turn the PANEL DIM thumbwheel allthe way up. The interior lights also come on whenany side door is opened. C...

83 Ignition Understanding the Positions of the Ignition The positions of the key in the ignition ACC allows some of your vehicle’s electricalaccessories such as the radio and the windshieldwipers to operate while the engine is not running. NOTE: Your vehicle is also equipped with an accessory timer....

84 ON allows you to test your vehicle’s warning lights(except the brake system warning light) to makesure they work before you start the engine. The keyreturns to the ON position once the engine isstarted and remains in this position while theengine runs. START cranks the engine. Release the key onc...

85 WARNING Do not leave children, unreliable adults,or pets unattended in your vehicle. The Turn Signal Lever You can use the turn signal lever on the left side ofthe steering column to: ❑ operate the turn signals and cornering lamps ❑ turn the high beams on/off ❑ flash the lights ❑ turn the windshi...

86 For lane changes, move the lever far enough tosignal but not to latch. The lever will return to theoff position when you release it. When the turn signal is used when the headlampsare on, the cornering lamps will automatically lighton either the right or left side depending on thedirection of the...

87 LOW — wipers will operate at low speed until turned off. HIGH — wipers will run at high speed until turned off. MIST — rotate the wiper switch down to the MIST position; the wipers will operate at low speedas long as the switch is held in this position. Whenreleased, the switch automatically retu...

88 OFF — the wipers will operate at low speed as long as the washer button is held. When thewasher button is released the wipers will completetwo to three cycles, depending on the position ofthe wipers when released, and then park. If the washer does not work, check the washerfluid level and fill it...

89 For information about refilling the washer fluid orreplacing your windshield wiper blades, see Windshield washer fluid and Wipers in the Index. Hazard Flasher The hazard flasher serves as a warning to otherdrivers to be careful when approaching or passingyour vehicle. The control switch for the h...

90 Horn To sound the horn, push the center pad area of thesteering wheel. The horn on the steering wheel File:05fncf8.ex Update:Thu Jun 27 10:02:20 1996

91 Power Tilt/Telescope SteeringColumn WARNING Never adjust the steering wheel whenthe vehicle is moving. The steering column positions are automaticallysaved and can be recalled along with the vehiclepersonality features when a memory position isselected through the keypad, keyless entrytransmitter...

92 During autoglide operation the column will move tothe full in and up position. The column will returnwhen autoglide is completed. During easy exit (if activated through the MessageCenter) operation the column will move to the fullin and up position. When the key is inserted intothe ignition switc...

93 Speed Control The speed of the vehicle cannot be automaticallycontrolled until the vehicle speed is at or above 30mph (48 km/h). Use of radio transmitting equipment that is notFederal Communications Commission (FCC) or inCanada the Canadian Radio andTelecommunications Commission (CRTC) approvedma...

94 To Turn Speed Control Off ❑ Press OFF, ❑ Turn off the vehicle ignition. Once speed control is switched off, the previouslyprogrammed set speed will be erased. To Turn Speed Control On ❑ Press ON To Set a Speed Press SET ACCEL. For speed control to operate, thespeed control must be ON and the vehi...

95 To Set a Higher Set Speed ❑ Press and hold SET ACCEL. Release the switchwhen the desired vehicle speed is reached. OR ❑ Press and release SET ACCEL. Each press willincrease the set speed by 1 mph (1.6 km/h).OR ❑ Accelerate with your accelerator pedal, thenpress SET ACCEL. You may accelerate with ...

96 Turning On the Lamps Map and Reading Lamps Your vehicle has two map lamps for the passengerand the driver. To turn on the map lamps, push theswitch next to each lamp. Front seat map and dome lamps Map lamp (with optional moon roof) The dual beam map lamps are located on each sideof the dome lamp....

97 With the switch pushed in one position, thecourtesy/reading lamp will illuminate when anydoor is opened or when the instrument paneldimmer switch is rotated to the courtesy lampposition. Push the switch to illuminate the lampcontinuously. Rear seat courtesy/reading lamps Moon Roof (If equipped) Y...

98 The switch for the moon roof To open the moon roof, press and hold the rearportion of the switch. The glass panel will move tothe intermediate position and stop. If the rear of theswitch is pressed again the glass panel will move tothe full open position and stop. To close the moon roof, press an...

99 The moon roof WARNING Do not let children play with the moonroof. They may seriously hurtthemselves. Sliding Shade The moon roof has a sliding shade that you canmanually open or close to block the sun when theglass panel is shut. To close the sliding shade, pull the shade towardthe front of the v...

101 Sun Visors Illuminated Visor Mirror (If equipped) To turn on the visor mirror, lift the mirror cover. The mirror on the sun visor HomeLink H Universal Transmitter (If equipped) The HomeLink Universal Transmitter provides aconvenient way to replace up to three hand-heldtransmitters with a single ...

102 Do not use this HomeLink Transmitter with anygarage door opener that lacks safety “stop” and“reverse” features as required by federal safetystandards, (this includes any garage door openermodel manufactured before April 1, 1982). A garagedoor opener which cannot “detect” an object in thepath of ...

103 4. Using both hands, push the hand-heldtransmitter button and the desired button onthe HomeLink Transmitter. Continue to press both buttons through step 5. 5. Hold down both buttons until you see the redlight on the HomeLink Transmitter flash, firstslowly and then rapidly. It indicates that youh...

104 Operating the HomeLink H Universal Transmitter Once it is programmed, the HomeLink UniversalTransmitter can be used in place of your hand-heldtransmitter(s). To operate, simply press theappropriate button on the HomeLink Transmitter.The red light comes on while the signal is beingtransmitted. NO...

105 ❑ Remove the cover panel from your garage dooropener receiver. (The receiver should be locatedby the garage door opener motor.) ❑ Locate the training button on the garage dooropener receiver. The exact location and color ofthe button may vary by garage door openerbrand. If you have difficulty lo...

106 NOTE: When selling your vehicle, be sure to erase all channels on the HomeLink Transmitter that youprogrammed. Accessories Accessories for your HomeLink UniversalTransmitter are available from the manufacturer ofthe device. If you would like additional informationor would like to purchase other ...

107 The power locks on the driver’s door Smart Locks The Smart Locks feature helps prevent you fromlocking the keys in your vehicle. With the key inthe ignition (in any switch position) and either thedriver’s or passenger’s door open, the doors cannotbe locked using the front door lock switches. NOT...

108 Using the Power Windows Each door has an illuminated power control thatopens and closes the window on that door. Thedriver’s door has a master control panel thatoperates the windows. Power windows can only be opened or closed whenthe ignition switch is in the ON or ACC position. WARNING Do not l...

109 There is also an Express Down feature on thedriver’s power window. This feature can beactivated through the menu functions of yourMessage Center. For conventional operation press the driver’swindow control to the first detent in the downposition. For express down operation press thecontrol to th...

110 Memory Profile System(If equipeed) The Personality Memory Feature customizes yourMark VIII for up to two (2) drivers. The followingfeatures are automatically recalled when unlockingthe doors using the remote entry transmitter,keyless entry keypad, or by pressing the Memory 1or Memory 2 switches ...

111 Personality Memory recall from the remotetransmitter can be disabled. This is done by slidingthe switch on the back of the transmitter to OFF.Personality Memory can still be recalled usingkeyless entry code or the Memory 1 or Memory 2switches. Keyless Entry Up to three unique keyless entry codes...

112 the right of the instrument cluster) to identifyyourself; otherwise, setting will not be saved andsubsequent changes will not be saved. Turning Personality OFF The Personality Memory feature can be turned offusing the Memory OFF switch on the driver’s door.The amber indicator light will be lit w...

115 Console Your vehicle has a full console. The full console hasthe features shown in the following illustration. The features on the full console File:05fncf8.ex Update:Thu Jun 27 10:02:20 1996

116 Cupholder With Full Console To open the cupholder, push down on thecupholder and release. WARNING Use only soft cups in the cupholder.Hard objects can injure you in acollision. Positive Retention Driver’s SideFloor Mat When installing or removing the driver’s side floormat you must attach/detach...

117 Trunk Opening the Trunk Manually To open and close the trunk from the outside: The trunk lock cylinder 1. Insert the key into the lock on the trunk. 2. Turn the key to the right until the trunk opens. 3. Remove the key before you close and lock the lid. 4. Shut the trunk lid by pushing on the to...

118 Using the Power Trunk Release The remote trunk lock switch located in the driver’sdoor trim panel can be operated at any time unlessyou render the switch inoperable by locking thebutton with your master key. The remote control for the trunk Keyless Entry System You can lock or unlock the vehicle...

119 When you bought your vehicle, you were given acomputer code that operates the system for yourvehicle. For your convenience, we have duplicatedthis code in three places. The code is: ❑ on your owner’s wallet card found in the glovecompartment ❑ taped to the right hinge of the trunk lid ❑ taped to...

120 3. To unlock the trunk, press the 5/6 buttonwithin five (5) seconds of unlocking the driver’sor passenger’s door, or re-enter the code toopen the driver’s door, then press 5/6. As long as the driver’s door has been unlocked first,you can open the passenger door or the trunk inany order. Locking ...

122 Arming, disarming and resetting youranti-theft system from the keyless entrypad The Keyless Entry system will arm the anti-theftsystem when you use the 7/8 and 9/0 keys to lockthe doors, and will disarm or reset a triggeredanti-theft alarm when you enter in the five digitcode to unlock the drive...

124 When you use the remote entry UNLOCK, TRUNKor PANIC buttons, the illuminated entry systemturns on the interior lights for 25 seconds. You canturn these lights off with the LOCK button or byturning the ignition to the RUN position. Memory Seat/Mirrors/Steering Column Feature Your vehicle allows t...

125 Replacing the Batteries The remote entry transmitter is powered by twocoin type three-volt lithium 1616 batteries(included) that should last for several years ofnormal use. If you notice a significant decrease inoperating range, the batteries should be replaced.Replacement batteries can be purch...

126 Battery Saver When the ignition is turned off, the vehicle willturn off battery voltage to the courtesy lamps after10 minutes and the demand lamps after 30minutes. This will prevent draining of the battery if thoselights have been left on inadvertently or if a door isnot completely closed. Batte...

127 Arming the System To arm the system, do the following four steps insequence. 1. Remove the key from the ignition. 2. Open any door. The alarm indicator light willstart flashing to remind you to arm the system. 3. Lock the doors by using the power door lockswitch, pressing the remote entry transm...

129 Coded Key Anti-Theft System Your vehicle is equipped with a coded key anti-theftsystem, you can only use an electronically codedkey to start the vehicle. During each vehicle startsequence, the coded key is read by the anti-theftsystem. If the key’s ID code matches that in theanti-theft system, t...

130 Spare Key Programming Procedure Two electronically coded keys were supplied withyour vehicle, use one of these with the procedurebelow: ❑ Using a coded key that you can start yourengine with, turn the ignition from the ON tothe OFF position. ❑ Within 15 seconds, insert a new key into theignition...

131 Seating and Safety Restraints Seats Head Restraints If you use them properly, head restraints will helpprotect your head and neck in a collision. A head restraint should be placed as high aspossible behind your head without interfering withyour vision. You can adjust the head restraints for your...

132 Adjusting the Seats WARNING Never adjust the driver’s seat orseatback when the vehicle is moving. WARNING Always drive and ride with yourseatback upright and the lap belt snugand low across the hips. WARNING Do not pile cargo higher than theseatbacks to avoid injuring people in acollision or sud...

133 latc h wil l allo w th e seatbac k t o rotat e approximately 5 ˚ forwar d befor e i t locks . Th e releas e i s provided onl y t o unloc k th e seatbac k whe n parke d o n steep downhil l grade s o r afte r a collision. WARNING Check to see that the seat and seatbackare latched securely in posit...

134 The rotating boot on the lap belt is designed toallow both rear seat entry/exit and access to thefront seat passengers. To enter the rear seat: 1. Rotate the safety belt boot rearward. 2. Enter the rear seat in front of the safety belt. 3. Rotate the safety belt boot forward to allow useby the f...

135 Heated Seats (If equipped) The driver’s and front passenger’s Heated Seats arecontrolled by the HEATED SEATS panel, which islocated directly below the climate control panel.The Heated Seat System will only operate with theignition key in the ON position and will maintain atemperature automatical...

138 The easy in/easy out feature of the driver seatmoves the seat two inches forward when: ❑ the transmission is in N (Neutral) or P (Park) ❑ the driver safety belt is buckled ❑ the ignition switch is turned to ON. Important Safety Belt Information The use of safety belts helps to restrain you andyo...

140 WARNING Ford recommends that all safety beltassemblies and attaching hardwareshould be inspected by a qualifiedtechnician after any collision. Safetybelt assemblies not in use during acollision should also be inspected andreplaced if either damage or improperoperation is noted. WARNING Children ...

141 Fastening the combination lap and shoulderbelt Fastening the rear seat lap and shoulder belt NOTE: Be sure to read and understand Important Safety Belt Information in this chapter. To adjust the lap part of the belt, pull up on the shoulder belt until the lap belt fits snugly and aslow as possib...

142 While the belt retracts, guide the tongue to itsoriginal position to prevent it from striking you orthe vehicle. Unfastening the lap/shoulder belts Right Front or Rear Window Seating Positions Your vehicle is equipped with a dual locking moderetractor on the shoulder belt portion of thecombinati...

143 Automatic locking mode I n thi s operatin g mode , th e shoulde r bel t retractor wil l b e automaticall y locke d an d wil l remai n locked whe n th e combinatio n lap/shoulde r safet y bel t is buckled , an d doe s no t allo w th e occupan t freedom o f movement . Thi s mod e provide s th e fo...

144 Unfastening the center rear lap safety belt NOTE: Be sure to read and understand Important Safety Belt Information in this chapter. Pull the belt across your hips and insert the tongueinto the correct buckle on your seat until you heara snap and feel it lock. Make sure the buckle issecurely fast...

145 WARNING Failure to follow these instructions willaffect the performance of the safetybelts and increase the risk of personalinjury. Safety Belt Maintenance Chec k th e safet y bel t system s periodicall y t o make sur e tha t the y wor k properl y an d ar e no t damaged. Al l safet y bel t assem...

147 WARNING If you are close to an inflating air bag,it could seriously injure you. Positionyour seat such that it is as far backfrom the steering wheel as possible butstill allows you to properly control thevehicle. Children and Air Bags NOTE : Fo r additiona l importan t safet y information o n th...

149 ❑ and the electrical wiring which connects thecomponents. The diagnostic module monitors its own circuits,the air bag electrical system, the air bag readinesslight, the air bag power, and the air bag inflators. Determining if System Is Operational The Air Bag Supplemental Restraint System uses a...

150 Disposal of Air Bags and Air Bag Equipped Vehicles Fo r disposa l o f ai r bag s o r ai r ba g equippe d vehicles, se e you r loca l For d o r Lincoln-Mercur y dealer . Air bag s MUS T B E dispose d o f b y qualifie d personnel. Safety Restraints for Children I n th e U.S . an d Canada , yo u ar...

151 WARNING Carefully follow all of themanufacturer’s instructions includedwith the safety seat you put in yourvehicle. If you do not install and usethe safety seat properly, the child maybe injured in a sudden stop or collision. WARNING Safety belts and seats can become hotin a vehicle that has bee...

153 WARNING Always keep the buckle release buttonpointing upward and away from thechild seat, with the tongue between thechild seat and the release button asshown in the following illustration. Safety belt buckle placement for child seats File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

154 WARNING Carefully follow all of themanufacturer’s instructions includedwith the safety seat you put in yourvehicle. If you do not install and usethe safety seat properly, the child maybe injured in a sudden stop or collision. Installing Child Safety Seats in the Front Seat and Rear Window Passen...

156 3. While holding the shoulder and lap beltportions together, route the tongue through thechild seat according to the child seatmanufacturer’s instructions. See Figure 2. Besure that the belt webbing is not twisted. Routing the lap/shoulder belt File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

158 5. Grasp the shoulder portion of the belt and pulldownward until all of the belt is extracted anda click is heard. At this time, the retractor is inthe automatic locking mode (child restraintmode). See Figure 4. NOTE: The dual locking mode retractor must be in the automatic locking mode to prope...

161 Checking that the seat is secure 8. Double check that the retractor is in theautomatic locking mode. Try to pull more beltout of the retractor. If you cannot, the belt isin the automatic locking mode. See Figure 8. File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

162 Checking the retractor 9. Check to make sure that the child seat isproperly secured prior to each use. If theretractor is not locked, repeat steps 6 through8. NOTE: To remove the retractor from automatic lock mode, allow seat belt to retract fully to itsstowed position and the retractor will aut...

163 Tether anchorage hardware Attachmen t hole s (a t eac h rea r outboar d seating position ) hav e bee n provide d i n you r vehicl e to attac h ancho r hardware , i f required . Tethe r anchor hardwar e kit s (par t numbe r 613D74) , including instructions , ma y b e obtaine d a t n o charg e fro...

165 Starting Fuel-Injected Engines Whe n startin g a fuel-injecte d engine , the most important thing to remember is to avoidpressing down on the accelerator before orduring starting . Onl y us e th e accelerato r whe n you hav e problem s gettin g you r vehicl e started . See Starting Your Engine i...

166 3. Make sure that the gearshift is in P (Park) andthe parking brake is set before you turn thekey. Before you start your vehicle, you should test thewarning lights on the instrument panel to makesure that they work. Refer to the Instrumentation chapter. Starting Your Engine To start your engine:...

167 Whenever you start your vehicle, release the key assoon as the engine starts. Excessive cranking coulddamage the starter. After you start the engine, let it idle for a fewseconds. Keep your foot on the brake pedal and putthe gearshift lever in gear. Release the parkingbrake. Slowly release the b...

169 Pushing Vehicle s wit h automati c transmission s canno t bestarte d b y pushing . Follo w th e direction s unde r If Your Vehicle Needs a Jump-Start in th e Roadside Emergencies Chapter. Guarding Against Exhaust Fumes Carbo n monoxide , althoug h colorles s an d odorless,is presen t in exhaus t...

171 Driving Brakes Applying the Brakes Your vehicle has anti-lock disc brakes on all fourwheels. They adjust automatically as the brake padswear down. When you press down hard on the brake pedal, thewheels will not lock and slide. The Anti-Lock BrakeSystem (ABS) automatically starts releasing andrea...

172 ligh t come s o n a t an y tim e othe r tha n righ t afteryo u tur n th e ke y to th e O N positio n o r durin g asudde n stop , hav e you r mobil e radi o deale r inspectth e installation. Parking Brake and Auto-Release Parking Brake The parking brake should be used wheneveryou park your vehicl...

173 WARNING If the parking brake is fully released,but the Brake System light remains on,have the brakes checked immediately.They may not be working properly. WARNING To prevent personal injury, do notrelease the parking brake while outsidethe vehicle. T o disengag e th e parkin g brake: 1. Th e ign...

174 Manual parking brake release lever The parking brake is not designed to stop a movingvehicle, but you can use the parking brake to stopyour vehicle in an emergency if the normal brakesfail. However, since the parking brake applies onlythe rear brakes, the stopping distance will increasegreatly a...

175 NOTE: Engine torque reduction is NOT active when engine coolant temperature is below -10˚F(-23˚C). During the Traction Control TM function, which most often occurs during low speed acceleration onslippery surfaces, a noise may be heard coming fromthe engine compartment. This is normal and maylas...

177 NOTE: If th e temperatur e drop s overnight , the vehicl e ma y appea r lo w becaus e th e ai r in th e airsprin g contracts . Thi s is normal ! Th e vehicl e willretur n to regula r heigh t soo n afte r th e vehicl e isstarted. Steering Your Vehicle You r vehicl e come s wit h powe r steering ....

179 WARNING DO NOT DRIVE YOUR VEHICLEUNTIL YOU VERIFY THAT THEBRAKELAMPS ARE WORKING. Onc e yo u plac e th e gearshif t securel y int o position,graduall y releas e th e brak e peda l an d us e theaccelerato r a s necessary. The positions of the console-mounted gearshift File:09fngf8.ex Update:Wed J...

181 When to use D (Overdrive) Overdrive is the usual driving position for anautomatic overdrive transmission. It works the sameway Drive works, automatically upshifting ordownshifting as the vehicle speeds or slows. However, Overdrive also shifts into a fourth gear —an overdrive gear — when your veh...

182 Yo u ca n tel l a console-mounte d gearshif t is securelylatche d in P (Park ) if th e leve r is adjacen t to th e P(Park ) an d yo u canno t mov e it withou t pushin g inth e thum b button. WARNING Never leave your vehicle unattendedwhile it is running. Driving With a Heavy Load Ther e ar e lim...

183 Limiting Your Vehicle’s Load The load that you add to your vehicle must notexceed the maximum load stated on the SafetyCompliance Certification Decal attached to the leftfront door pillar. To figure the weight of your vehicle’s load, add theweights of: ❑ the driver and passengers ❑ luggage and a...

184 If your vehicle exceeds the GVWR, remove cargofrom your vehicle accordingly. If your vehicle exceeds the GAWR for either axle, shift the load orremove cargo accordingly. WARNING Improper distribution of your vehicle’sload or carrying weight in excess of theamount shown on the tire decal cancause...

185 Ten to 15% of the loaded trailer’s weight should beon the tongue. However, the tongue load shouldnever exceed 10% of the maximum weight thatyour vehicle can safely tow. New vehicles should be driven 2,000 miles(3,200 km) before towing a trailer. WARNING Towing trailers beyond the maximumrecommen...

187 Connecting the trailer’s brakes Electric brakes and manual, automatic, or surge-typehydraulic brakes are safe if you install them properlyand adjust them according to the manufacturer’sinstructions. Be sure that your trailer’s brakes meetlocal and federal regulations. Separate trailer brakes of ...

188 If you tow in D (Overdrive) while riding throughhilly country, your vehicle may frequently shiftbetween Overdrive and Third gears. To preventyour vehicle from shifting too much, press theTransmission Control Switch located on the shiftlever. This will also give the engine more powergoing up hill...

189 Roadside Emergencies Hazard Flashers The flashers work whether your vehicle is runningor not. The flashers work for up to two hourswhen the battery is fully charged and in goodcondition without draining the battery excessively. Ifthe flashers run for longer than two hours or if thebattery is not...

190 The fuel pump shut-off switch WARNING If you see or smell fuel, do not resetthe switch or try to start your vehicle.Have all the passengers get out of thevehicle and call the local firedepartment or a towing service. If your engine cranks but does not start after acollision or substantial jolt: ...

191 5. Check under the vehicle again for leaking fuel. If you see or smell fuel, do not start yourvehicle again. If you do not see or smell fuel, you can try to start your vehicle again. Fuses Fuses (miniature and high current) protect yourvehicle’s wiring system from overloading. Ifelectrical parts...

192 The instrument panel fuse box File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

193 The Instrument Panel Fuses, Circuit Breakers and Relays File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

195 High Current Fuses High current fuses are circuit protectors that arepart of the wiring harness for some electricalequipment. These, like fuses, open when the circuitload exceeds their amperage rating. High currentfuses may be purchased from your Ford orLincoln-Mercury dealer. File:10fner8.ex Up...

196 The high current fuse panel is located in the enginecompartment on the left-hand fender apron. WARNING Always disconnect the battery beforeservicing high current fuses. Ford recommends that high current fuses bereplaced by a qualified technician. The high current fuse panel location File:10fner8...

198 The high current fuses File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

199 Checking and Replacing Fuses If you need to check a fuse, follow these steps: 1. Find the fuse panel on driver’s side end of theinstrument panel by opening the door. Unsnapcover from the instrument panel. 2. Find the fuse you want to check (fuses arenumbered on the fuse panel) and remove itwith ...

201 WARNING Always replace a fuse with one that hasthe specified amperage rating. Using afuse with a higher amperage rating cancause severe wire damage and couldstart a fire. 5. Replace the cover. Even after you replace a fuse, it may continue toblow if you do not find what caused the overload.If th...

202 When you drive with the temporary spare tire,DO NOT: ❑ exceed 50 mph (80 km/h) under anycircumstances. ❑ load your vehicle so that it is heavier than themaximum vehicle load rating listed on the tiredecal. ❑ tow a trailer. ❑ use tire chains on this tire. ❑ try to repair the temporary spare tire ...

203 The spare tire location To remove the spare tire: 1. Remove the spare tire cover. 2. Unscrew the wing-nut holding down the sparetire. NOTE: Wing-nut is not removable. 3. Unscrew the wing-bolt holding down the jackand handle. 4. Lift out the spare tire, jack, and lug wrench. Preparing to Change t...

205 WARNING If the vehicle slips off the jack, you orsomeone else could be seriouslyinjured. 2. Get out the spare tire and jack. WARNING To avoid injury, never run the enginewith one wheel off the ground, such aswhen changing a tire. 3. Remove the center ornament from the aluminum wheel with the tap...

206 WARNING To lessen the risk of personal injury,do not put any part of your body underthe vehicle while changing a tire. Donot start the engine when your vehicleis on the jack. The jack is only meantfor changing the tire. The improper lift point File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

208 The lug nuts on the wheel 7. Place any ornaments in the trunk. 8. Put the tire, jack, and wrench away. Make surethe jack is securely fastened so it does notrattle when you drive. 9. Unblock the wheels. 10. Turn on the air suspension switch. After replacing a flat tire with the temporary sparetir...

209 The anti-theft lug nut and key Removing the anti-theft lug nut Insert the key over the locking lug nut. Make surethat you hold the key square to the lug nut. If youhold the key on an angle, you may damage the keyand the lug nut. Place the lug nut wrench over the lug nut key andapply pressure on ...

210 WARNING To protect yourself when charging abattery, always shield your face andeyes. Make sure that you can breathefresh air. WARNING Applying too much pressure on theends when lifting a battery could causeacid to spill. Lift the battery with acarrier or with your hands on theopposite corners. W...

211 2. Do not disconnect the battery of the disabledvehicle. You could damage the vehicle’selectrical system. 3. Park the booster vehicle close to the hood ofthe disabled vehicle. Make sure the vehicles do not touch each other. Set the parking brake on both vehicles and stay clear of theengine cooli...

212 WARNING Do not connect the end of the secondcable to the negative ( s ) terminal of the battery to be jumped. A spark maycause an explosion of the gases thatsurround the battery. Jump-Starting 1. Make sure that the jumper cables are not in the way of moving engine parts, then start thebooster ve...

213 After the vehicle is started, let it idle for a while tolet the engine “relearn” its idle conditions. Drive itaround for a while with all electrical accessoriesturned off to let the battery recharge. Driveabilitymay be deteriorated slightly until all drive modesare “relearned.” You may need to u...

214 DO NOT TOW WITH SLINGBELT EQUIPMENT.Ford Motor Company has not developed orapproved a T-hook sling-type procedure. Use wheellift or flatbed equipment. When towing your MarkVIII with wheel lift equipment, be sure dollies arein place under the trailing wheels if the airsuspension is deflated to pr...

215 Maintenance and Care Service Made Easy Ford has two goals for servicing your vehicle. 1. When we can, we design parts that do notneed to be serviced. 2. We want to make servicing your vehicle aseasy as possible. To help you: ❑ We highlight do-it-yourself items in yellow inthe engine compartment ...

216 Use only recommended fuels, lubricants, fluids, andservice parts conforming to Ford specifications.Motorcraft parts are designed and built to providethe best performance in your vehicle. Using theseparts for replacement is your assurance thatFord-built quality stays in your vehicle. NOTE: Always...

217 Precautions When Servicing YourVehicle Be especially careful when inspecting or servicingyour vehicle. Here are some general precautions foryour safety: ❑ Do not work on a hot engine. The enginecooling fan may come on unexpectedly. Alwaysturn the engine off and let it cool. WARNING The cooling f...

219 Opening the Hood 1. Inside the vehicle, pull the hood release handlelocated under the bottom left corner of theinstrument panel. The hood release under the instrument panel 2. Go to the front of the vehicle and release theauxiliary latch that is located under the hood atthe center of the vehicle...

220 Whenever you close the hood, latch it securely. NOTE: Apply lubricant to the hood latch at six-month intervals to maintain smooth andtrouble-free operation. NOTE: Read and understand Precautions When Servicing Your Vehicle at the beginning of this chapter before opening the hood. If the battery ...

221 A 4.6 Liter 4V SFI engine File:11fnmc8.ex Update:Thu Jun 20 14:28:32 1996

222 Engine Oil Recommendations We recommend using Motorcraft oil or anequivalent oil meeting Ford SpecificationWSS-M2C153-F and displaying the AmericanPetroleum Institute CERTIFICATION MARK on thefront of the container. The API Certification Mark Never use: ❑ “Non-Detergent” oils ❑ Oils labeled API ...

223 Checking and Adding Engine Oil Since the proper amount of engine oil is importantfor safe engine operation, check the oil using thedipstick each time you put fuel in your vehicle.Remember the engine must be off, the oil must bewarm and the vehicle must be parked on levelground. Checking the engi...

224 It may be necessary to add some oil between oilchanges. Make sure you use a CERTIFIED engineoil of the preferred viscosity. Your vehicle’swarranty coverage may not apply if engine damageis caused by the use of improper engine oil. Add engine oil through the oil filler cap highlightedin yellow. T...

225 Refer to the Maintenance Schedule booklet for additional information. The Vehicle Message Center may be manually resetby depressing the Oil Change Reset Switch for fiveseconds. Protect your skin by washing with soap and water. WARNING Continuous contact with USED motoroil has caused cancer in la...

226 WARNING If you use a brake fluid that is notDOT 3, you will cause permanentdamage to your brakes. Do not fill the reservoir above the MAX line. If you find that the fluid level is excessively low —below the seam or ridge on the outside of theplastic reservoir — have the brake system inspected. W...

227 Windshield Washer Fluid Washer Fluid Check the level of the windshield washer fluidperiodically, or when the warning message indicateslow fluid. The reservoir for washer fluid is locatedin front of the engine compartment behind driver’sside headlamp. The reservoir for the windshield washer fluid...

228 Engine Coolant Checking the Engine Coolant NOTE: Be sure to read and understand Precautions When Servicing Your Vehicle at the beginning of this chapter. WARNING The cooling fan is automatic and maycome on at any time. Always disconnectthe negative terminal of the batterybefore working near the ...

229 Adding Engine Coolant WARNING Do not put engine coolant in thecontainer for the windshield washerfluid. If sprayed on the windshield, engine coolant couldmake it difficult to see through the windshield. When the engine is cool, add a 50/50 mixture ofengine coolant and water to the engine coolant...

231 concentration in your vehicle is such that thecoolant will not freeze at the temperature level inwhich you drive during winter months. Neverincrease the engine coolant concentration above60%. Leave a 50/50 mixture of engine coolant andwater in your vehicle year-round in non-extremeclimates. Prop...

232 ❑ Reinstall the engine coolant tube fill plug whenthe system is full. ❑ Select maximum heater temperature and fanspeed settings. Position control to discharge airat A/C vents in instrument panel. ❑ Start engine and allow to idle. While engine isidling, feel for hot air at A/C vents. NOTE: IF AIR...

233 Power Steering Fluid Check the level of the power steering fluid at leasttwice a year (i.e., every Spring and Fall). Checking and Adding Power Steering Fluid 1. Start the engine and let it run until the powersteering fluid reaches normal operatingtemperature. The power steering fluid will be att...

234 Fluid level for power steering Use only MERCON H ATF power steering fluid. If the power steering fluid is low, do not drive yourvehicle for a long period of time before adding fluid.This can damage the power steering pump. Automatic Transmission Fluid Under normal circumstances, you do not need ...

235 NOTE: If the vehicle has been operated for an extended period at high speeds or in city trafficduring hot weather, or pulling a trailer, the vehicleshould be turned off for about 30 minutes to allowthe fluid to cool before checking. Checking the Automatic Transmission Fluid With the vehicle on a...

236 NOTE: Always dispose of used automotive fluids in a responsible manner. Follow your community’sstandards for disposing of these types of fluids. Callyour local recycling center to find out aboutrecycling automotive fluids. Automatic transmission dipstick Battery Your vehicle may have a Motorcraf...

237 Help Us Protect Our Environment Ford Motor Company strongly recommends thatused lead-acid batteries be returned to anauthorized recycling facility for disposal. Battery recycling symbol Because your vehicle’s engine is electronicallycontrolled by a computer, some control conditionsare maintained...

238 Rinse thoroughly with clear water. Do not use fuel,kerosene, paint thinner, or other solvents to cleanyour wiper blades. These will damage your blades. To make reaching the wiper blades easy, simplyturn the ignition to the ACC position and turn yourwipers on. Wait for them to reach a verticalpos...

239 Tire Rotation Because your vehicle’s front and rear tires performdifferent jobs, they often wear differently. To makesure your tires wear evenly and last longer, rotatethem as indicated in the following diagram. Do not include the spare tire as part of yourrotation. For tire rotation intervals, ...

240 Replacing the Tires Replace any tires that show wear bands. When yourtire shows a wear band, it has only 1/16 inch (2mm) of tread left. A worn-out tire Because your vehicle’s tires may wear unevenly,you may need to replace them before a wear bandappears across the entire tread. WARNING When repl...

242 WARNING The traction grade assigned to this tireis based on braking (straightahead)traction tests and does not includecornering (turning) traction. Temperature A B C The temperature grades are A (the highest), B, andC, representing the tire’s resistance to thegeneration of heat and its ability t...

243 The all weather tread pattern on your tires helpsmaintain traction in rain or snow. However, toachieve the best traction in snow and iceconditions, you may need to use snow tires. To prevent body damage, do not use snow chainson your Mark VIII. WARNING Snow tires must be the same size andgrade a...

244 If the fuel door does not open when you push therelease button, open the trunk and find the overriderelease on the right side. The override release is ahandle which says FUEL FILLER DOOR RELEASEMANUAL OVERRIDE. Open the fuel door bypulling on the handle. The fuel filler door manual release — loc...

245 3. To replace the fuel cap, align the tabs on the cap with the notches on the filler pipe. Pushdown and turn it clockwise until it stops. 4. Push the fuel door closed. WARNING If you do not use the proper fuel cap,the pressure in the fuel tank candamage the fuel system or cause it towork imprope...

247 Cleaner Air Ford approves the use of gasolines to improve airquality, including reformulated gasolines that containoxygenates such as a maximum of 10% ethanol or15% MTBE. There should be no more than 5%methanol with cosolvents and additives to protectthe fuel system. Safety Information Relating ...

248 If you are taking the medication “Antabuse” orother forms of disulfiram for the treatment ofalcoholism, vapor or skin contact with agasoline-methanol blend, may cause the same kindof adverse reaction as drinking an alcoholicbeverage. In sensitive individuals, serious personalinjury or sickness c...

249 To calculate fuel economy: 1. Fill the tank completely and record the initialodometer reading. 2. Every time you buy fuel record the amount (ingallons or liters) purchased. 3. After at least three to five tankfuls, fill the fueltank and record the final odometer reading. 4. Use these equations t...

250 ❑ Extended use of the A/C, defroster, rearwindow defroster and other accessories ❑ Underinflated tires ❑ Heavy loads ❑ Aftermarket add-ons such as bike, ski or luggageracks, bug deflectors, etc. Self-Service Pointers If you choose to do your own fueling, you shouldalso perform a few simple maint...

253 How to Prepare Your Vehicle for Inspection/Maintenance (I/M) Testing In some localities it may become a legalrequirement to pass an Inspection/Maintenance(I/M) test of the On-Board Diagnostic (OBD) IIsystem. If the vehicle’s powertrain system or itsbattery has just been serviced, the OBD II syst...

254 The alignment of your headlamps should bechecked if: ❑ oncoming motorists frequently signal you to turnoff your vehicle’s high beams when you do nothave the high beams on ❑ the headlamps do not seem to give you enoughlight to see clearly at night ❑ the headlamp beams are pointed substantiallyawa...

256 4. Replace the high beam dust cap by aligningtabs and rotating clockwise 1/4 turn. 5. Replace the sight shield. Aiming Headlamps Your vehicle is equipped with a Vehicle HeadlampAim Device (VHAD) on each headlamp body. Eachheadlamp may be properly aimed in the horizontaldirection (left/right) and...

259 Bulb specifications File:11fnmc8.ex Update:Thu Jun 20 14:28:32 1996

260 Cleaning Your Vehicle Washing and Polishing Your Vehicle Wash the outside of your vehicle, including theunderside, with a mild detergent. DO NOT: ❑ Wash your vehicle with hot water ❑ Wash your vehicle while it sits in directsunlight ❑ Wash your vehicle while the body is hot Pollen, bird dropping...

262 Cleaning the Interior Lamps Your interior dome lamps and map lamps are plasticand should be cleaned with a mild detergentdiluted in water. Rinse them with clear water. Cleaning the Seats Leather For routine cleaning, wipe the surface with a soft,damp cloth. For more thorough cleaning, wipe thesu...

263 Capacities and Specifications Refill Capacities, Motorcraft Parts,and Lubricant Specifications Motorcraft Parts File:12fncs8.ex Update:Thu Jun 20 14:28:48 1996

264 Fluid Specifications and Capacities NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axlehas been submerged in water. Otherwise, the lubeshould not be checked or changed unless a leak issuspected or repair required. File:12fncs8.ex Update:Thu Jun 20 14:...

265 Lubricant Specifications File:12fncs8.ex Update:Thu Jun 20 14:28:48 1996

266 NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axlehas been submerged in water. Otherwise, the lubeshould not be checked or changed unless a leak issuspected or repair required. Vehicle Storage Maintenance Tips If you plan on storing your vehicle for ...

271 Customer Assistance If You Have a Service Problem Ford Motor Company has authorized Ford andLincoln-Mercury dealerships that can service yourvehicle for you. This chapter tells you how to getservice or maintenance for your vehicle. Service/Maintenance Concerns (U.S. or Canada) Ford recommends ta...

272 If you have any questions or concerns that thedealership cannot answer, contact the CustomerAssistance Center. If you still have a complaint involving a warrantydispute, you may wish to contact the DisputeSettlement Board (U.S. only) or the Canadian MotorVehicle Arbitration Plan (CAMVAP) in Cana...

273 What Kind of Cases Does the Board Review? The Board reviews all warranty performancecomplaints on Ford, Mercury and Lincoln cars andFord and Mercury light trucks under the newvehicle limited warranty that have not beenresolved by either a dealer or Ford Motor Company,except those involving: ❑ a ...

274 How does the Board Work? The Board consists of: ❑ three consumer representatives ❑ a Ford or Lincoln/Mercury dealer Consumer candidates for Board membership arerecruited and trained by an independent consultingfirm. Dealers are chosen because of their businessleadership qualities. What the Board...

276 To Request a DSB Brochure/Application For a brochure/application, speak to your dealer orwrite to the Board at the following address: Ford of Canada CustomerAssistance If you live in Canada and have any questions orconcerns that the dealership cannot answer, contactthe Lincoln Centre. Please hav...

277 Vehicle Identification Number (VIN/SerialNumber) Mediation/Arbitration Program (Canada Only) In those cases where you continue to feel that theefforts by Ford and the dealer to resolve afactory-related vehicle service concern have beenunsatisfactory, Ford of Canada participates in animpartial th...

281 Accessories Ford Accessories for Your Vehicle A wide selection of accessories is available throughyour local authorized dealer. These fine accessorieshave been engineered specifically to fulfill yourautomotive needs. They are custom designed tocomplement the style and aerodynamic appearanceof yo...

295 Index A ABS warning light (see Anti-lock brake system) . . . . . . . . . . . . 11 Accessory position on the ignition . . . . 83 Accident damage . . . . . . . . . . . . 216 Air bag supplemental restraint system . . . 145 and child safety seats . . . . . . . . . 151 description . . . . . . . . . ....

301 proper solution . . . . . . . . . . . 235 recovery reservoir . . . . . . . . . . 228 refill capacities . . . . . . . . . . . . 264 specifications . . . . . . . . . . . . 265 temperature gauge . . . . . . . . . . 17 Engine coolant temperature gauge. . . . . 17 Engine fan. . . . . . . . . . . . . ...

309 for infants. . . . . . . . . . . 150, 151 head . . . . . . . . . . . . . . . . 131 lap and shoulder belts . . . . . . . . 138 lap belt . . . . . . . . . . . . . . . 143 maintenance. . . . . . . . . . . . . 145 proper use . . . . . . . . . . . . . 138 replacement . . . . . . . . . . . . . 145 war...

314 Service Station Information File:17fngs8.ex Update:Thu Jun 27 10:02:28 1996

1 Introduction Ford’s Commitment to You At Ford Motor Company, excellence is thecontinuous commitment to achieve the best resultpossible. It is dedication to learning what you want,determination to develop the right concept, andexecution of that concept with care, precision, andattention to detail. ...

2 Things to Know About Using ThisGuide Congratulations on the purchase of your newvehicle. This guide has information about theequipment and the options for your new vehicle.You may not have bought all of the optionsavailable to you. If you do not know whichinformation applies to your vehicle, talk ...

3 To use the Index , turn to the back of the book and search in the alphabetical listing for the wordthat best describes the information you need. If theword you chose is not listed, think of other relatedwords and look them up. We have designed theIndex so that you can find information under atechn...

4 Ford Extended Service Plan More Protection for Your Vehicle You can get more protection for your new car orlight truck by purchasing a Ford Extended ServicePlan (Ford ESP). Ford ESP is the only extendedservice program with the Ford name on it and theonly service contract backed by Ford MotorCompan...

5 Breaking Your Vehicle In Your new vehicle goes through an adjustment orbreak-in period during the first 1,000 miles(1,600 km) that you drive it. During the break-inperiod, you need to pay careful attention to howyou drive your vehicle. ❑ Avoid sudden stops. Because your vehicle has new brake linin...

7 Instrumentation The instrument panel (dashboard) on your vehicle isdivided into several different sections. Theillustrations on the following pages show the majorparts of the instrument panel that are described inthis chapter. Some items shown may not be on allvehicles. The main controls for the c...

8 The Instrument Panel File:03fnis8.ex Update:Thu Jun 27 10:00:37 1996

9 The Instrument Cluster File:03fnis8.ex Update:Thu Jun 27 10:00:37 1996

10 Indicator Lights and Chimes Brake System Warning Light The warning light for the brakes can show twothings — that the parking brake is not fullyreleased, or that the brake fluid level is low in themaster cylinder reservoir. If the fluid level is low,the brake system should be checked by your deal...

11 Anti-Lock Brake System Warning Light This light comes on for a few seconds when youturn the ignition key to the START position. Itshould go off shortly after the engine starts. If itstays on longer than five (5) seconds, it indicatesthat your anti-lock brake system may not beworking properly. Nor...

12 4. If the level is low, add only as much oil asnecessary before you start the engine again. Donot overfill. Do not operate the engine if thelight is on, regardless of the oil level. Contactyour nearest dealer for further service actions. For more information about adding oil, see Adding engine oi...

15 Chime for Headlamps On This chime sounds if the driver or any passengerdoor is open when the parking lamps or headlampsare on. The chime sounds until you close the door,turn off the lamps or turn the ignition to the ONposition. Redundant Electronic Gearshift Indicator The redundant electronic gea...

16 The Instrument Cluster In addition to warning lights, the instrument clusterhas an electronic odometer, a speedometer,tachometer, fuel and coolant temperature gauges. Odometer The odometer tells you the total number of miles(kilometers) your vehicle has been driven. Speedometer The speedometer Th...

17 Tachometer The tachometer The tachometer displays the approximate enginerevolutions per minute (rpm), or how fast theengine is running. You can drive your vehicle at most rpm points onthe tachometer but you must stay out of the redzone. Engine Coolant Temperature Gauge This gauge indicates the te...

18 The pointer moves from the C (cold) mark into theNORMAL band as the engine coolant warms up. Itis acceptable for the pointer to fluctuate within theNORMAL band under normal driving conditions.Under certain driving conditions such as, heavy stopand go traffic, or driving up hills in hot weather,th...

19 Fuel Gauge The fuel gauge displays approximately how muchfuel you have in the fuel tank. For a proper fuel gauge indication after adding fuel,the ignition switch should be in the OFF positionwhile the vehicle is being refueled. The fuel gauge indicator may vary slightly while thevehicle is in mot...

20 ❑ Continuous warning reporting of monitoredsystems You can select different features for the M/C todisplay by using the keyboard directly below theM/C display. You will hear a tone when you pressone of these controls. However, if the M/C detectsa warning from any of the monitored systems thenthe ...

21 Vehicle Settings Menu A press of the VEHICLE SETTINGS control causesthe Message Center to display the menu featureswhich affect the vehicle regardless of which driverpersonality profile is currently selected. Repeatedpressing of the VEHICLE SETTINGS control allowsquick cycling through the menu fe...

22 ❑ OIL CHANGE RESET — This option allows you to reset the oil monitoring system to 100%(or your Personalized Oil Reset Percentage) aftereach oil change. The RESET control must bepressed and held for 5 seconds while thedisplay counts down to trigger an oil changereset. After a successful reset the ...

23 4. Press the VEHICLE SETTINGS control tocomplete the procedure. A press of any controlbesides RESET or VEHICLE SETTINGS willabort the procedure and will not establish anew Personalized Oil Reset Percentage. When your Personalized Oil Reset Percentage hasbeen established, it will be used beginning...

24 ❑ PHONE SCREEN — (if equipped with a factory phone) when a call is placed,information about the call is displayed in themessage center. Fuel Range A press of the RANGE switch allows you to displayapproximately how many miles (kilometers) you candrive before you run out of fuel. To ensure accuracy...

26 Reset A press of the RESET control will allow you toreset the current feature being displayed. Warnings,Average Fuel Economy, Clock Set, CompassAdjustment, Vehicle Settings, and Driver Settingsare the only features which respond to the RESETcontrol. Range and Instantaneous Fuel Economycannot be r...

27 O Press DATE/TIME repeatedly to select thecorrect month of the year. O Then press RESET to proceed to the dateadjustment display. O Press DATE/TIME repeatedly to select thecorrect day of the month. O Then press RESET to complete theset/adjustment procedure. ❑ Time Only Display — A second press of...

28 O To START the Elapsed Time count when itis stopped without resetting the counter,briefly press the reset control for less than 2seconds. O To reset the elapsed time counter, hold thereset control down until the count reads00:00:00 (about 2 seconds). Compass Pressing the COMPASS control will disp...

29 ❑ Traction Control (If equipped) ❑ Fuel Level At normal conclusion of the system check sequence,the M/C will display the last displayed featurebefore pressing the SYSTEM CHECK control or thewarnings that are active. For two of the systems reported in the systemcheck (Engine Oil Life Left and Fuel...

30 Vehicle System Status Displays These messages are displayed on the MessageCenter when the operator uses one of the vehiclesystems below, or the operation of a vehicle systemoccurs. ❑ PHONE SCREEN — This display will show the status of the cellular phone usage (if thevehicle is equipped with the f...

31 System Warnings System warnings alert you to possible problems ormalfunctions in your vehicle’s operating systems.There are 23 warning messages which can bedisplayed by the Message Center to show the statusof the monitored systems. When a warning occurs,the warning message is displayed and a tone...

33 DRIVER’S DOOR AJAR — This warning message is displayed when the driver’s door is notcompletely closed and the ignition switch is eitherON or in ACC mode. RIGHT DOOR AJAR — This warning message is displayed when the right (passenger side) door isnot completely closed and the ignition switch iseith...

35 CHECK TRANS-MISSION — This warning message is displayed when the transmission is notoperating properly. If this warning stays on orcomes on, contact your dealer for transmissionservice as soon as safely possible. TRANS-MISSION OVERHEAT — This warning message is displayed when the transmission iso...

37 AIR RIDE SWITCH OFF — This warning message is displayed when the AIR SUSPENSION SERVICESWITCH is in the OFF position. The air suspensionservice switch is located in the vehicle trunk in thejack stowage area on the left side. For moreinformation refer to the Air Suspension section in the Driving c...

38 OIL CHANGE RESET PROCEDURE — Thisprocedure allows you to reset the oil monitoringsystem to 100% (or your Personalized Oil ResetPercentage) after each oil change. 1. Press the VEHICLE SETTINGS control until the“OIL CHANGE RESET” display appears. 2. Then press the RESET switch and hold it for 5seco...

39 Function/Status Error Messages For some functions displayed by the MessageCenter, there will be error messages displayed,instead of the requested information, if thatinformation is not currently available because ofimproper operation of sensor systems, or the vehiclenetwork communication between ...

40 Factors Affecting Compass Accuracy Magnetic mounted devices (antennas, racks, etc.)should not be located on the front third of thevehicle roof. Placement of these devices near thecompass will cause the compass to be inaccurate. Ifthese devices are used, for improved accuracy,recalibrate the compa...

41 Set zone variation adjustment 1. Press and hold the COMPASS control, press theRESET control. Next, release both controls. Thedisplay will show: 2. Press the ENGLISH/METRIC control to enterthe Set Zone mode. The display will nowshow: NOTE: The display shows “##” (where ## is a number from 1-15) wh...

42 4. Press the RESET control until the numbershown in the display is the correct number forthe zone you are in. When the zone numberreaches 15, pressing the RESET control will setthe zone number to 1. 5. Press the COMPASS control to complete thezone setting. (To exit this mode without settinga zone...

43 Calibration Procedure 1. Find an open, level area free from steelstructures and high voltage lines. An empty,level parking lot is recommended. 2. Press and hold the COMPASS control, thenpress the RESET control. Next, release bothcontrols. The display will show: 3. Press the RESET control to enter...

46 If the light fails to illuminate, continues to flash,remains on, or you hear a beeping sound, have thesystem serviced at your Ford or Lincoln-Mercurydealer immediately. Overdrive Off Indicator This light tells you that the Transmission ControlSwitch on the gearshift lever has been pushed.When the...

47 If the light does not come ON when the TCS isdepressed or if the light FLASHES when you aredriving, have your vehicle serviced at the firstopportunity. If this condition persists, damage couldoccur to the transmission. Anti-Theft Alarm Light This light is used when you set the anti-theft alarmsys...

48 Traction Control Off Light This light tells you that the traction control systemhas been turned off using the Vehicle Settings menuin the Message Center. The traction control systemdefaults to “ON” (light is not illuminated) wheneverthe vehicle is shut off and restarted. File:03fnis8.ex Update:Th...

49 Electronic Sound Systems Premium Stereo Cassette File:04fnas8.ex Update:Wed Jun 19 10:43:44 1996

50 Premium Stereo Cassette and Stereo Cassette with CD DJ File:04fnas8.ex Update:Wed Jun 19 10:43:44 1996

51 Premium Stereo Cassette, StereoCassette with CD DJ andPremium Compact Disc Radio Your vehicle is equipped with either a premiumstereo cassette radio or a premium compact discradio. Both systems are available with a JBL H upgrade system, which includes a Ford 10-CDchanger. Individual functions of ...

53 Follow the easy steps below to set these buttons tothe desired frequencies: 1. Select a band, then select a frequency. 2. Press one of the memory preset buttons andhold the button until the sound returns. Thatstation is now held in memory on that button. 3. Follow the two steps above for each sta...

54 ❑ Increasing or decreasing treble response Press the top c of the “TREBLE” button to increase treble; press the bottom d of the treble button to decrease treble. ❑ Adjusting speaker balance Balance control allows you to adjust the sounddistribution between the right and left speakers.Press the to...

55 NOTE: A cassette tape can be loaded with the ignition on whether or not the radio power is on.However, with radio power off, the cassette tape isloaded and stored. NOTE: Noise reduction system manufactured under license from Dolby Labs Licensing Corporation.“Dolby” and double-D symbol are tradema...

56 To stop the scan mode on the presently sampledtape selection, press “SCAN” a second time. ❑ How to change the side of the tape beingplayed The alternate side of the tape can be selected bypressing the “SIDE 1-2” button. How to eject the tape To stop the tape and eject the cassette, press the“EJ” ...

57 ❑ Protect cassettes from exposure to directsunlight, high humidity and extreme heat orcold. If they are exposed to extreme conditions,allow them to reach a moderate temperaturebefore playing. ❑ If a tape is loose inside the cassette, tighten itbefore playing by putting your finger or a pencilinto...

58 Ho w to take care of and clean the CDplaye r and discs To ensure the continued performance of your CDplayer, carefully read the following precautions: ❑ Always handle a disc by the edge. Never touchthe playing surface. ❑ Before playing, inspect all discs for anycontamination. If needed, clean dis...

59 — CD-ER 0001 — Disc upside down or unreadable. — CD-ER INIT — Mechanism disconnected or malfunctioning. — CD-ER 0002 — Eject error. — CD-ER 0100 — Computer CD loaded. — CD-ER ____ (other codes) — Mechanism malfunctions. Ford 10-CD Changer (If equipped) Introduction The 10-CD Changer Unit is mount...

61 Figure 4 NOTE: To remove one or more compact disc(s) from the disc magazine, push the correspondinglever(s) (numbered 1 to 10 on the side of the discmagazine) to the left. Disc(s) will partially come outfor easy removal. 5. Close unit by sliding changer panel door to theleft. The Compact Disc Cha...

64 ❑ Before playing, inspect all discs for anycontamination. If needed, clean discs with anapproved disc cleaner, such as the Discwasher H Compact Disc Cleaner or the Allsop 3 H Compact Disc Cleaner, by wiping from thecenter out to the edges. Do not use a circularmotion to clean. ❑ Do not clean disc...

65 Common Operating Conditions of the CD Player The following information is designed to help yourecognize typical situations that could be mistakenlyinterpreted as mechanical malfunctions of the discplayer. ❑ A disc is already loaded. ❑ The disc is inserted with the label surfacedownward. ❑ The dis...

67 To minimize these conditions, a stereo/mono blendcircuit has been incorporated into this system. Thisfeature automatically switches a weak stereo signalto a clearer monaural signal, which improves thequality of reception. Several sources of static are normal conditions onAM frequencies. These can...

69 Controls and Features The Climate Control System Electronic Automatic Temperature Control System The Electronic Automatic Temperature Control(EATC) module is located at the center of theinstrument panel and operates only when the key isin the ON position. The EATC feature maintains the temperatur...

70 The automatic temperature control system To turn your EATC on, push the AUTOMATICbutton or any of the six override buttons along thebottom of the control. To turn your EATC off, press the OFF button.When the system is off, the display window will beblank (dark). If you select AUTOMATIC, the syste...

72 When in AUTOMATIC and weather conditionsrequire heat, air will be sent to the floor. But, afeature is included in your EATC to preventblowing cold air to the floor if the engine coolant isnot warm enough to allow heating. In 3-1/2minutes or less, the fan speed will start to increaseand the airflo...

74 You can override the fan speed at any time. If youuse the thumbwheel to override the fan speed, theEATC will continue to control the temperature butyou control the fan speed. To return to auto fancontrol, press the AUTOMATIC button. If you areoperating in one of the override functions (FLOOR,MAX ...

76 FLR O DEF button Push this button to get air to the floor andwindshield defrosters at the same time. The displaywill show the set temperature, FLR and the Defrostsymbol. If the outside temperature is about 50˚F(10˚C) and above, the air will be dehumidified toremove moisture. This will help to pre...

77 ❑ To prevent humidity buildup inside yourvehicle, always drive with the EATC Systemturned on. ❑ Do not put objects under the front seats thatinterfere with the flow of air to the back seatarea. ❑ Remove any snow, ice, or leaves from the airintake area of your EATC System which couldblock the air ...

78 The button that controls the rear windowdefroster and heated outside rearview mirrors Before using the defroster, clear away any snowthat is on the rear window and outside rearviewmirrors. With the engine running, push thedefroster button. After approximately 10 minutes, the defroster willturn of...

79 NOTE: If you have a vehicle with an automatic lighting system, the DRL system is active until theautomatic system turns on the headlamps. NOTE: You may notice that the lights flicker when the vehicle is turned on or off. This is a normalcondition. WARNING The Daytime Running Light (DRL)system wil...

80 Setting the Autolamp On/Off Delay System By using the autolamp, you can set the headlampsto: ❑ turn on the lamps automatically at night ❑ turn off the lamps automatically during daylight ❑ keep the lamps on for up to three minutes afteryou turn the key to OFF. The controls for the autolamp To use...

81 3. Rotate the headlamp control counterclockwisefrom the OFF position. NOTE: The Message Center will display the amount of time that has been set for the autolampto turn off the headlamps after turning the key tooff. 4. The autolamp will automatically turn the lampson and off for you. Do not put a...

82 The thumbwheel that controls the light on theinstrument panel and the interior light To dim the instrument panel lights, rotate thePANEL DIM thumbwheel down. To turn on theinterior lights, turn the PANEL DIM thumbwheel allthe way up. The interior lights also come on whenany side door is opened. C...

83 Ignition Understanding the Positions of the Ignition The positions of the key in the ignition ACC allows some of your vehicle’s electricalaccessories such as the radio and the windshieldwipers to operate while the engine is not running. NOTE: Your vehicle is also equipped with an accessory timer....

84 ON allows you to test your vehicle’s warning lights(except the brake system warning light) to makesure they work before you start the engine. The keyreturns to the ON position once the engine isstarted and remains in this position while theengine runs. START cranks the engine. Release the key onc...

85 WARNING Do not leave children, unreliable adults,or pets unattended in your vehicle. The Turn Signal Lever You can use the turn signal lever on the left side ofthe steering column to: ❑ operate the turn signals and cornering lamps ❑ turn the high beams on/off ❑ flash the lights ❑ turn the windshi...

86 For lane changes, move the lever far enough tosignal but not to latch. The lever will return to theoff position when you release it. When the turn signal is used when the headlampsare on, the cornering lamps will automatically lighton either the right or left side depending on thedirection of the...

87 LOW — wipers will operate at low speed until turned off. HIGH — wipers will run at high speed until turned off. MIST — rotate the wiper switch down to the MIST position; the wipers will operate at low speedas long as the switch is held in this position. Whenreleased, the switch automatically retu...

88 OFF — the wipers will operate at low speed as long as the washer button is held. When thewasher button is released the wipers will completetwo to three cycles, depending on the position ofthe wipers when released, and then park. If the washer does not work, check the washerfluid level and fill it...

89 For information about refilling the washer fluid orreplacing your windshield wiper blades, see Windshield washer fluid and Wipers in the Index. Hazard Flasher The hazard flasher serves as a warning to otherdrivers to be careful when approaching or passingyour vehicle. The control switch for the h...

90 Horn To sound the horn, push the center pad area of thesteering wheel. The horn on the steering wheel File:05fncf8.ex Update:Thu Jun 27 10:02:20 1996

91 Power Tilt/Telescope SteeringColumn WARNING Never adjust the steering wheel whenthe vehicle is moving. The steering column positions are automaticallysaved and can be recalled along with the vehiclepersonality features when a memory position isselected through the keypad, keyless entrytransmitter...

92 During autoglide operation the column will move tothe full in and up position. The column will returnwhen autoglide is completed. During easy exit (if activated through the MessageCenter) operation the column will move to the fullin and up position. When the key is inserted intothe ignition switc...

93 Speed Control The speed of the vehicle cannot be automaticallycontrolled until the vehicle speed is at or above 30mph (48 km/h). Use of radio transmitting equipment that is notFederal Communications Commission (FCC) or inCanada the Canadian Radio andTelecommunications Commission (CRTC) approvedma...

94 To Turn Speed Control Off ❑ Press OFF, ❑ Turn off the vehicle ignition. Once speed control is switched off, the previouslyprogrammed set speed will be erased. To Turn Speed Control On ❑ Press ON To Set a Speed Press SET ACCEL. For speed control to operate, thespeed control must be ON and the vehi...

95 To Set a Higher Set Speed ❑ Press and hold SET ACCEL. Release the switchwhen the desired vehicle speed is reached. OR ❑ Press and release SET ACCEL. Each press willincrease the set speed by 1 mph (1.6 km/h).OR ❑ Accelerate with your accelerator pedal, thenpress SET ACCEL. You may accelerate with ...

96 Turning On the Lamps Map and Reading Lamps Your vehicle has two map lamps for the passengerand the driver. To turn on the map lamps, push theswitch next to each lamp. Front seat map and dome lamps Map lamp (with optional moon roof) The dual beam map lamps are located on each sideof the dome lamp....

97 With the switch pushed in one position, thecourtesy/reading lamp will illuminate when anydoor is opened or when the instrument paneldimmer switch is rotated to the courtesy lampposition. Push the switch to illuminate the lampcontinuously. Rear seat courtesy/reading lamps Moon Roof (If equipped) Y...

98 The switch for the moon roof To open the moon roof, press and hold the rearportion of the switch. The glass panel will move tothe intermediate position and stop. If the rear of theswitch is pressed again the glass panel will move tothe full open position and stop. To close the moon roof, press an...

99 The moon roof WARNING Do not let children play with the moonroof. They may seriously hurtthemselves. Sliding Shade The moon roof has a sliding shade that you canmanually open or close to block the sun when theglass panel is shut. To close the sliding shade, pull the shade towardthe front of the v...

101 Sun Visors Illuminated Visor Mirror (If equipped) To turn on the visor mirror, lift the mirror cover. The mirror on the sun visor HomeLink H Universal Transmitter (If equipped) The HomeLink Universal Transmitter provides aconvenient way to replace up to three hand-heldtransmitters with a single ...

102 Do not use this HomeLink Transmitter with anygarage door opener that lacks safety “stop” and“reverse” features as required by federal safetystandards, (this includes any garage door openermodel manufactured before April 1, 1982). A garagedoor opener which cannot “detect” an object in thepath of ...

103 4. Using both hands, push the hand-heldtransmitter button and the desired button onthe HomeLink Transmitter. Continue to press both buttons through step 5. 5. Hold down both buttons until you see the redlight on the HomeLink Transmitter flash, firstslowly and then rapidly. It indicates that youh...

104 Operating the HomeLink H Universal Transmitter Once it is programmed, the HomeLink UniversalTransmitter can be used in place of your hand-heldtransmitter(s). To operate, simply press theappropriate button on the HomeLink Transmitter.The red light comes on while the signal is beingtransmitted. NO...

105 ❑ Remove the cover panel from your garage dooropener receiver. (The receiver should be locatedby the garage door opener motor.) ❑ Locate the training button on the garage dooropener receiver. The exact location and color ofthe button may vary by garage door openerbrand. If you have difficulty lo...

106 NOTE: When selling your vehicle, be sure to erase all channels on the HomeLink Transmitter that youprogrammed. Accessories Accessories for your HomeLink UniversalTransmitter are available from the manufacturer ofthe device. If you would like additional informationor would like to purchase other ...

107 The power locks on the driver’s door Smart Locks The Smart Locks feature helps prevent you fromlocking the keys in your vehicle. With the key inthe ignition (in any switch position) and either thedriver’s or passenger’s door open, the doors cannotbe locked using the front door lock switches. NOT...

108 Using the Power Windows Each door has an illuminated power control thatopens and closes the window on that door. Thedriver’s door has a master control panel thatoperates the windows. Power windows can only be opened or closed whenthe ignition switch is in the ON or ACC position. WARNING Do not l...

109 There is also an Express Down feature on thedriver’s power window. This feature can beactivated through the menu functions of yourMessage Center. For conventional operation press the driver’swindow control to the first detent in the downposition. For express down operation press thecontrol to th...

110 Memory Profile System(If equipeed) The Personality Memory Feature customizes yourMark VIII for up to two (2) drivers. The followingfeatures are automatically recalled when unlockingthe doors using the remote entry transmitter,keyless entry keypad, or by pressing the Memory 1or Memory 2 switches ...

111 Personality Memory recall from the remotetransmitter can be disabled. This is done by slidingthe switch on the back of the transmitter to OFF.Personality Memory can still be recalled usingkeyless entry code or the Memory 1 or Memory 2switches. Keyless Entry Up to three unique keyless entry codes...

112 the right of the instrument cluster) to identifyyourself; otherwise, setting will not be saved andsubsequent changes will not be saved. Turning Personality OFF The Personality Memory feature can be turned offusing the Memory OFF switch on the driver’s door.The amber indicator light will be lit w...

115 Console Your vehicle has a full console. The full console hasthe features shown in the following illustration. The features on the full console File:05fncf8.ex Update:Thu Jun 27 10:02:20 1996

116 Cupholder With Full Console To open the cupholder, push down on thecupholder and release. WARNING Use only soft cups in the cupholder.Hard objects can injure you in acollision. Positive Retention Driver’s SideFloor Mat When installing or removing the driver’s side floormat you must attach/detach...

117 Trunk Opening the Trunk Manually To open and close the trunk from the outside: The trunk lock cylinder 1. Insert the key into the lock on the trunk. 2. Turn the key to the right until the trunk opens. 3. Remove the key before you close and lock the lid. 4. Shut the trunk lid by pushing on the to...

118 Using the Power Trunk Release The remote trunk lock switch located in the driver’sdoor trim panel can be operated at any time unlessyou render the switch inoperable by locking thebutton with your master key. The remote control for the trunk Keyless Entry System You can lock or unlock the vehicle...

119 When you bought your vehicle, you were given acomputer code that operates the system for yourvehicle. For your convenience, we have duplicatedthis code in three places. The code is: ❑ on your owner’s wallet card found in the glovecompartment ❑ taped to the right hinge of the trunk lid ❑ taped to...

120 3. To unlock the trunk, press the 5/6 buttonwithin five (5) seconds of unlocking the driver’sor passenger’s door, or re-enter the code toopen the driver’s door, then press 5/6. As long as the driver’s door has been unlocked first,you can open the passenger door or the trunk inany order. Locking ...

122 Arming, disarming and resetting youranti-theft system from the keyless entrypad The Keyless Entry system will arm the anti-theftsystem when you use the 7/8 and 9/0 keys to lockthe doors, and will disarm or reset a triggeredanti-theft alarm when you enter in the five digitcode to unlock the drive...

124 When you use the remote entry UNLOCK, TRUNKor PANIC buttons, the illuminated entry systemturns on the interior lights for 25 seconds. You canturn these lights off with the LOCK button or byturning the ignition to the RUN position. Memory Seat/Mirrors/Steering Column Feature Your vehicle allows t...

125 Replacing the Batteries The remote entry transmitter is powered by twocoin type three-volt lithium 1616 batteries(included) that should last for several years ofnormal use. If you notice a significant decrease inoperating range, the batteries should be replaced.Replacement batteries can be purch...

126 Battery Saver When the ignition is turned off, the vehicle willturn off battery voltage to the courtesy lamps after10 minutes and the demand lamps after 30minutes. This will prevent draining of the battery if thoselights have been left on inadvertently or if a door isnot completely closed. Batte...

127 Arming the System To arm the system, do the following four steps insequence. 1. Remove the key from the ignition. 2. Open any door. The alarm indicator light willstart flashing to remind you to arm the system. 3. Lock the doors by using the power door lockswitch, pressing the remote entry transm...

129 Coded Key Anti-Theft System Your vehicle is equipped with a coded key anti-theftsystem, you can only use an electronically codedkey to start the vehicle. During each vehicle startsequence, the coded key is read by the anti-theftsystem. If the key’s ID code matches that in theanti-theft system, t...

130 Spare Key Programming Procedure Two electronically coded keys were supplied withyour vehicle, use one of these with the procedurebelow: ❑ Using a coded key that you can start yourengine with, turn the ignition from the ON tothe OFF position. ❑ Within 15 seconds, insert a new key into theignition...

131 Seating and Safety Restraints Seats Head Restraints If you use them properly, head restraints will helpprotect your head and neck in a collision. A head restraint should be placed as high aspossible behind your head without interfering withyour vision. You can adjust the head restraints for your...

132 Adjusting the Seats WARNING Never adjust the driver’s seat orseatback when the vehicle is moving. WARNING Always drive and ride with yourseatback upright and the lap belt snugand low across the hips. WARNING Do not pile cargo higher than theseatbacks to avoid injuring people in acollision or sud...

133 latc h wil l allo w th e seatbac k t o rotat e approximately 5 ˚ forwar d befor e i t locks . Th e releas e i s provided onl y t o unloc k th e seatbac k whe n parke d o n steep downhil l grade s o r afte r a collision. WARNING Check to see that the seat and seatbackare latched securely in posit...

134 The rotating boot on the lap belt is designed toallow both rear seat entry/exit and access to thefront seat passengers. To enter the rear seat: 1. Rotate the safety belt boot rearward. 2. Enter the rear seat in front of the safety belt. 3. Rotate the safety belt boot forward to allow useby the f...

135 Heated Seats (If equipped) The driver’s and front passenger’s Heated Seats arecontrolled by the HEATED SEATS panel, which islocated directly below the climate control panel.The Heated Seat System will only operate with theignition key in the ON position and will maintain atemperature automatical...

138 The easy in/easy out feature of the driver seatmoves the seat two inches forward when: ❑ the transmission is in N (Neutral) or P (Park) ❑ the driver safety belt is buckled ❑ the ignition switch is turned to ON. Important Safety Belt Information The use of safety belts helps to restrain you andyo...

140 WARNING Ford recommends that all safety beltassemblies and attaching hardwareshould be inspected by a qualifiedtechnician after any collision. Safetybelt assemblies not in use during acollision should also be inspected andreplaced if either damage or improperoperation is noted. WARNING Children ...

141 Fastening the combination lap and shoulderbelt Fastening the rear seat lap and shoulder belt NOTE: Be sure to read and understand Important Safety Belt Information in this chapter. To adjust the lap part of the belt, pull up on the shoulder belt until the lap belt fits snugly and aslow as possib...

142 While the belt retracts, guide the tongue to itsoriginal position to prevent it from striking you orthe vehicle. Unfastening the lap/shoulder belts Right Front or Rear Window Seating Positions Your vehicle is equipped with a dual locking moderetractor on the shoulder belt portion of thecombinati...

143 Automatic locking mode I n thi s operatin g mode , th e shoulde r bel t retractor wil l b e automaticall y locke d an d wil l remai n locked whe n th e combinatio n lap/shoulde r safet y bel t is buckled , an d doe s no t allo w th e occupan t freedom o f movement . Thi s mod e provide s th e fo...

144 Unfastening the center rear lap safety belt NOTE: Be sure to read and understand Important Safety Belt Information in this chapter. Pull the belt across your hips and insert the tongueinto the correct buckle on your seat until you heara snap and feel it lock. Make sure the buckle issecurely fast...

145 WARNING Failure to follow these instructions willaffect the performance of the safetybelts and increase the risk of personalinjury. Safety Belt Maintenance Chec k th e safet y bel t system s periodicall y t o make sur e tha t the y wor k properl y an d ar e no t damaged. Al l safet y bel t assem...

147 WARNING If you are close to an inflating air bag,it could seriously injure you. Positionyour seat such that it is as far backfrom the steering wheel as possible butstill allows you to properly control thevehicle. Children and Air Bags NOTE : Fo r additiona l importan t safet y information o n th...

149 ❑ and the electrical wiring which connects thecomponents. The diagnostic module monitors its own circuits,the air bag electrical system, the air bag readinesslight, the air bag power, and the air bag inflators. Determining if System Is Operational The Air Bag Supplemental Restraint System uses a...

150 Disposal of Air Bags and Air Bag Equipped Vehicles Fo r disposa l o f ai r bag s o r ai r ba g equippe d vehicles, se e you r loca l For d o r Lincoln-Mercur y dealer . Air bag s MUS T B E dispose d o f b y qualifie d personnel. Safety Restraints for Children I n th e U.S . an d Canada , yo u ar...

151 WARNING Carefully follow all of themanufacturer’s instructions includedwith the safety seat you put in yourvehicle. If you do not install and usethe safety seat properly, the child maybe injured in a sudden stop or collision. WARNING Safety belts and seats can become hotin a vehicle that has bee...

153 WARNING Always keep the buckle release buttonpointing upward and away from thechild seat, with the tongue between thechild seat and the release button asshown in the following illustration. Safety belt buckle placement for child seats File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

154 WARNING Carefully follow all of themanufacturer’s instructions includedwith the safety seat you put in yourvehicle. If you do not install and usethe safety seat properly, the child maybe injured in a sudden stop or collision. Installing Child Safety Seats in the Front Seat and Rear Window Passen...

156 3. While holding the shoulder and lap beltportions together, route the tongue through thechild seat according to the child seatmanufacturer’s instructions. See Figure 2. Besure that the belt webbing is not twisted. Routing the lap/shoulder belt File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

158 5. Grasp the shoulder portion of the belt and pulldownward until all of the belt is extracted anda click is heard. At this time, the retractor is inthe automatic locking mode (child restraintmode). See Figure 4. NOTE: The dual locking mode retractor must be in the automatic locking mode to prope...

161 Checking that the seat is secure 8. Double check that the retractor is in theautomatic locking mode. Try to pull more beltout of the retractor. If you cannot, the belt isin the automatic locking mode. See Figure 8. File:06fnss8.ex Update:Wed Jun 19 15:04:39 1996

162 Checking the retractor 9. Check to make sure that the child seat isproperly secured prior to each use. If theretractor is not locked, repeat steps 6 through8. NOTE: To remove the retractor from automatic lock mode, allow seat belt to retract fully to itsstowed position and the retractor will aut...

163 Tether anchorage hardware Attachmen t hole s (a t eac h rea r outboar d seating position ) hav e bee n provide d i n you r vehicl e to attac h ancho r hardware , i f required . Tethe r anchor hardwar e kit s (par t numbe r 613D74) , including instructions , ma y b e obtaine d a t n o charg e fro...

165 Starting Fuel-Injected Engines Whe n startin g a fuel-injecte d engine , the most important thing to remember is to avoidpressing down on the accelerator before orduring starting . Onl y us e th e accelerato r whe n you hav e problem s gettin g you r vehicl e started . See Starting Your Engine i...

166 3. Make sure that the gearshift is in P (Park) andthe parking brake is set before you turn thekey. Before you start your vehicle, you should test thewarning lights on the instrument panel to makesure that they work. Refer to the Instrumentation chapter. Starting Your Engine To start your engine:...

167 Whenever you start your vehicle, release the key assoon as the engine starts. Excessive cranking coulddamage the starter. After you start the engine, let it idle for a fewseconds. Keep your foot on the brake pedal and putthe gearshift lever in gear. Release the parkingbrake. Slowly release the b...

169 Pushing Vehicle s wit h automati c transmission s canno t bestarte d b y pushing . Follo w th e direction s unde r If Your Vehicle Needs a Jump-Start in th e Roadside Emergencies Chapter. Guarding Against Exhaust Fumes Carbo n monoxide , althoug h colorles s an d odorless,is presen t in exhaus t...

171 Driving Brakes Applying the Brakes Your vehicle has anti-lock disc brakes on all fourwheels. They adjust automatically as the brake padswear down. When you press down hard on the brake pedal, thewheels will not lock and slide. The Anti-Lock BrakeSystem (ABS) automatically starts releasing andrea...

172 ligh t come s o n a t an y tim e othe r tha n righ t afteryo u tur n th e ke y to th e O N positio n o r durin g asudde n stop , hav e you r mobil e radi o deale r inspectth e installation. Parking Brake and Auto-Release Parking Brake The parking brake should be used wheneveryou park your vehicl...

173 WARNING If the parking brake is fully released,but the Brake System light remains on,have the brakes checked immediately.They may not be working properly. WARNING To prevent personal injury, do notrelease the parking brake while outsidethe vehicle. T o disengag e th e parkin g brake: 1. Th e ign...

174 Manual parking brake release lever The parking brake is not designed to stop a movingvehicle, but you can use the parking brake to stopyour vehicle in an emergency if the normal brakesfail. However, since the parking brake applies onlythe rear brakes, the stopping distance will increasegreatly a...

175 NOTE: Engine torque reduction is NOT active when engine coolant temperature is below -10˚F(-23˚C). During the Traction Control TM function, which most often occurs during low speed acceleration onslippery surfaces, a noise may be heard coming fromthe engine compartment. This is normal and maylas...

177 NOTE: If th e temperatur e drop s overnight , the vehicl e ma y appea r lo w becaus e th e ai r in th e airsprin g contracts . Thi s is normal ! Th e vehicl e willretur n to regula r heigh t soo n afte r th e vehicl e isstarted. Steering Your Vehicle You r vehicl e come s wit h powe r steering ....

179 WARNING DO NOT DRIVE YOUR VEHICLEUNTIL YOU VERIFY THAT THEBRAKELAMPS ARE WORKING. Onc e yo u plac e th e gearshif t securel y int o position,graduall y releas e th e brak e peda l an d us e theaccelerato r a s necessary. The positions of the console-mounted gearshift File:09fngf8.ex Update:Wed J...

181 When to use D (Overdrive) Overdrive is the usual driving position for anautomatic overdrive transmission. It works the sameway Drive works, automatically upshifting ordownshifting as the vehicle speeds or slows. However, Overdrive also shifts into a fourth gear —an overdrive gear — when your veh...

182 Yo u ca n tel l a console-mounte d gearshif t is securelylatche d in P (Park ) if th e leve r is adjacen t to th e P(Park ) an d yo u canno t mov e it withou t pushin g inth e thum b button. WARNING Never leave your vehicle unattendedwhile it is running. Driving With a Heavy Load Ther e ar e lim...

183 Limiting Your Vehicle’s Load The load that you add to your vehicle must notexceed the maximum load stated on the SafetyCompliance Certification Decal attached to the leftfront door pillar. To figure the weight of your vehicle’s load, add theweights of: ❑ the driver and passengers ❑ luggage and a...

184 If your vehicle exceeds the GVWR, remove cargofrom your vehicle accordingly. If your vehicle exceeds the GAWR for either axle, shift the load orremove cargo accordingly. WARNING Improper distribution of your vehicle’sload or carrying weight in excess of theamount shown on the tire decal cancause...

185 Ten to 15% of the loaded trailer’s weight should beon the tongue. However, the tongue load shouldnever exceed 10% of the maximum weight thatyour vehicle can safely tow. New vehicles should be driven 2,000 miles(3,200 km) before towing a trailer. WARNING Towing trailers beyond the maximumrecommen...

187 Connecting the trailer’s brakes Electric brakes and manual, automatic, or surge-typehydraulic brakes are safe if you install them properlyand adjust them according to the manufacturer’sinstructions. Be sure that your trailer’s brakes meetlocal and federal regulations. Separate trailer brakes of ...

188 If you tow in D (Overdrive) while riding throughhilly country, your vehicle may frequently shiftbetween Overdrive and Third gears. To preventyour vehicle from shifting too much, press theTransmission Control Switch located on the shiftlever. This will also give the engine more powergoing up hill...

189 Roadside Emergencies Hazard Flashers The flashers work whether your vehicle is runningor not. The flashers work for up to two hourswhen the battery is fully charged and in goodcondition without draining the battery excessively. Ifthe flashers run for longer than two hours or if thebattery is not...

190 The fuel pump shut-off switch WARNING If you see or smell fuel, do not resetthe switch or try to start your vehicle.Have all the passengers get out of thevehicle and call the local firedepartment or a towing service. If your engine cranks but does not start after acollision or substantial jolt: ...

191 5. Check under the vehicle again for leaking fuel. If you see or smell fuel, do not start yourvehicle again. If you do not see or smell fuel, you can try to start your vehicle again. Fuses Fuses (miniature and high current) protect yourvehicle’s wiring system from overloading. Ifelectrical parts...

192 The instrument panel fuse box File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

193 The Instrument Panel Fuses, Circuit Breakers and Relays File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

195 High Current Fuses High current fuses are circuit protectors that arepart of the wiring harness for some electricalequipment. These, like fuses, open when the circuitload exceeds their amperage rating. High currentfuses may be purchased from your Ford orLincoln-Mercury dealer. File:10fner8.ex Up...

196 The high current fuse panel is located in the enginecompartment on the left-hand fender apron. WARNING Always disconnect the battery beforeservicing high current fuses. Ford recommends that high current fuses bereplaced by a qualified technician. The high current fuse panel location File:10fner8...

198 The high current fuses File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

199 Checking and Replacing Fuses If you need to check a fuse, follow these steps: 1. Find the fuse panel on driver’s side end of theinstrument panel by opening the door. Unsnapcover from the instrument panel. 2. Find the fuse you want to check (fuses arenumbered on the fuse panel) and remove itwith ...

201 WARNING Always replace a fuse with one that hasthe specified amperage rating. Using afuse with a higher amperage rating cancause severe wire damage and couldstart a fire. 5. Replace the cover. Even after you replace a fuse, it may continue toblow if you do not find what caused the overload.If th...

202 When you drive with the temporary spare tire,DO NOT: ❑ exceed 50 mph (80 km/h) under anycircumstances. ❑ load your vehicle so that it is heavier than themaximum vehicle load rating listed on the tiredecal. ❑ tow a trailer. ❑ use tire chains on this tire. ❑ try to repair the temporary spare tire ...

203 The spare tire location To remove the spare tire: 1. Remove the spare tire cover. 2. Unscrew the wing-nut holding down the sparetire. NOTE: Wing-nut is not removable. 3. Unscrew the wing-bolt holding down the jackand handle. 4. Lift out the spare tire, jack, and lug wrench. Preparing to Change t...

205 WARNING If the vehicle slips off the jack, you orsomeone else could be seriouslyinjured. 2. Get out the spare tire and jack. WARNING To avoid injury, never run the enginewith one wheel off the ground, such aswhen changing a tire. 3. Remove the center ornament from the aluminum wheel with the tap...

206 WARNING To lessen the risk of personal injury,do not put any part of your body underthe vehicle while changing a tire. Donot start the engine when your vehicleis on the jack. The jack is only meantfor changing the tire. The improper lift point File:10fner8.ex Update:Thu Jun 20 14:27:22 1996

208 The lug nuts on the wheel 7. Place any ornaments in the trunk. 8. Put the tire, jack, and wrench away. Make surethe jack is securely fastened so it does notrattle when you drive. 9. Unblock the wheels. 10. Turn on the air suspension switch. After replacing a flat tire with the temporary sparetir...

209 The anti-theft lug nut and key Removing the anti-theft lug nut Insert the key over the locking lug nut. Make surethat you hold the key square to the lug nut. If youhold the key on an angle, you may damage the keyand the lug nut. Place the lug nut wrench over the lug nut key andapply pressure on ...

210 WARNING To protect yourself when charging abattery, always shield your face andeyes. Make sure that you can breathefresh air. WARNING Applying too much pressure on theends when lifting a battery could causeacid to spill. Lift the battery with acarrier or with your hands on theopposite corners. W...

211 2. Do not disconnect the battery of the disabledvehicle. You could damage the vehicle’selectrical system. 3. Park the booster vehicle close to the hood ofthe disabled vehicle. Make sure the vehicles do not touch each other. Set the parking brake on both vehicles and stay clear of theengine cooli...

212 WARNING Do not connect the end of the secondcable to the negative ( s ) terminal of the battery to be jumped. A spark maycause an explosion of the gases thatsurround the battery. Jump-Starting 1. Make sure that the jumper cables are not in the way of moving engine parts, then start thebooster ve...

213 After the vehicle is started, let it idle for a while tolet the engine “relearn” its idle conditions. Drive itaround for a while with all electrical accessoriesturned off to let the battery recharge. Driveabilitymay be deteriorated slightly until all drive modesare “relearned.” You may need to u...

214 DO NOT TOW WITH SLINGBELT EQUIPMENT.Ford Motor Company has not developed orapproved a T-hook sling-type procedure. Use wheellift or flatbed equipment. When towing your MarkVIII with wheel lift equipment, be sure dollies arein place under the trailing wheels if the airsuspension is deflated to pr...

215 Maintenance and Care Service Made Easy Ford has two goals for servicing your vehicle. 1. When we can, we design parts that do notneed to be serviced. 2. We want to make servicing your vehicle aseasy as possible. To help you: ❑ We highlight do-it-yourself items in yellow inthe engine compartment ...

216 Use only recommended fuels, lubricants, fluids, andservice parts conforming to Ford specifications.Motorcraft parts are designed and built to providethe best performance in your vehicle. Using theseparts for replacement is your assurance thatFord-built quality stays in your vehicle. NOTE: Always...

217 Precautions When Servicing YourVehicle Be especially careful when inspecting or servicingyour vehicle. Here are some general precautions foryour safety: ❑ Do not work on a hot engine. The enginecooling fan may come on unexpectedly. Alwaysturn the engine off and let it cool. WARNING The cooling f...

219 Opening the Hood 1. Inside the vehicle, pull the hood release handlelocated under the bottom left corner of theinstrument panel. The hood release under the instrument panel 2. Go to the front of the vehicle and release theauxiliary latch that is located under the hood atthe center of the vehicle...

220 Whenever you close the hood, latch it securely. NOTE: Apply lubricant to the hood latch at six-month intervals to maintain smooth andtrouble-free operation. NOTE: Read and understand Precautions When Servicing Your Vehicle at the beginning of this chapter before opening the hood. If the battery ...

221 A 4.6 Liter 4V SFI engine File:11fnmc8.ex Update:Thu Jun 20 14:28:32 1996

222 Engine Oil Recommendations We recommend using Motorcraft oil or anequivalent oil meeting Ford SpecificationWSS-M2C153-F and displaying the AmericanPetroleum Institute CERTIFICATION MARK on thefront of the container. The API Certification Mark Never use: ❑ “Non-Detergent” oils ❑ Oils labeled API ...

223 Checking and Adding Engine Oil Since the proper amount of engine oil is importantfor safe engine operation, check the oil using thedipstick each time you put fuel in your vehicle.Remember the engine must be off, the oil must bewarm and the vehicle must be parked on levelground. Checking the engi...

224 It may be necessary to add some oil between oilchanges. Make sure you use a CERTIFIED engineoil of the preferred viscosity. Your vehicle’swarranty coverage may not apply if engine damageis caused by the use of improper engine oil. Add engine oil through the oil filler cap highlightedin yellow. T...

225 Refer to the Maintenance Schedule booklet for additional information. The Vehicle Message Center may be manually resetby depressing the Oil Change Reset Switch for fiveseconds. Protect your skin by washing with soap and water. WARNING Continuous contact with USED motoroil has caused cancer in la...

226 WARNING If you use a brake fluid that is notDOT 3, you will cause permanentdamage to your brakes. Do not fill the reservoir above the MAX line. If you find that the fluid level is excessively low —below the seam or ridge on the outside of theplastic reservoir — have the brake system inspected. W...

227 Windshield Washer Fluid Washer Fluid Check the level of the windshield washer fluidperiodically, or when the warning message indicateslow fluid. The reservoir for washer fluid is locatedin front of the engine compartment behind driver’sside headlamp. The reservoir for the windshield washer fluid...

228 Engine Coolant Checking the Engine Coolant NOTE: Be sure to read and understand Precautions When Servicing Your Vehicle at the beginning of this chapter. WARNING The cooling fan is automatic and maycome on at any time. Always disconnectthe negative terminal of the batterybefore working near the ...

229 Adding Engine Coolant WARNING Do not put engine coolant in thecontainer for the windshield washerfluid. If sprayed on the windshield, engine coolant couldmake it difficult to see through the windshield. When the engine is cool, add a 50/50 mixture ofengine coolant and water to the engine coolant...

231 concentration in your vehicle is such that thecoolant will not freeze at the temperature level inwhich you drive during winter months. Neverincrease the engine coolant concentration above60%. Leave a 50/50 mixture of engine coolant andwater in your vehicle year-round in non-extremeclimates. Prop...

232 ❑ Reinstall the engine coolant tube fill plug whenthe system is full. ❑ Select maximum heater temperature and fanspeed settings. Position control to discharge airat A/C vents in instrument panel. ❑ Start engine and allow to idle. While engine isidling, feel for hot air at A/C vents. NOTE: IF AIR...

233 Power Steering Fluid Check the level of the power steering fluid at leasttwice a year (i.e., every Spring and Fall). Checking and Adding Power Steering Fluid 1. Start the engine and let it run until the powersteering fluid reaches normal operatingtemperature. The power steering fluid will be att...

234 Fluid level for power steering Use only MERCON H ATF power steering fluid. If the power steering fluid is low, do not drive yourvehicle for a long period of time before adding fluid.This can damage the power steering pump. Automatic Transmission Fluid Under normal circumstances, you do not need ...

235 NOTE: If the vehicle has been operated for an extended period at high speeds or in city trafficduring hot weather, or pulling a trailer, the vehicleshould be turned off for about 30 minutes to allowthe fluid to cool before checking. Checking the Automatic Transmission Fluid With the vehicle on a...

236 NOTE: Always dispose of used automotive fluids in a responsible manner. Follow your community’sstandards for disposing of these types of fluids. Callyour local recycling center to find out aboutrecycling automotive fluids. Automatic transmission dipstick Battery Your vehicle may have a Motorcraf...

237 Help Us Protect Our Environment Ford Motor Company strongly recommends thatused lead-acid batteries be returned to anauthorized recycling facility for disposal. Battery recycling symbol Because your vehicle’s engine is electronicallycontrolled by a computer, some control conditionsare maintained...

238 Rinse thoroughly with clear water. Do not use fuel,kerosene, paint thinner, or other solvents to cleanyour wiper blades. These will damage your blades. To make reaching the wiper blades easy, simplyturn the ignition to the ACC position and turn yourwipers on. Wait for them to reach a verticalpos...

239 Tire Rotation Because your vehicle’s front and rear tires performdifferent jobs, they often wear differently. To makesure your tires wear evenly and last longer, rotatethem as indicated in the following diagram. Do not include the spare tire as part of yourrotation. For tire rotation intervals, ...

240 Replacing the Tires Replace any tires that show wear bands. When yourtire shows a wear band, it has only 1/16 inch (2mm) of tread left. A worn-out tire Because your vehicle’s tires may wear unevenly,you may need to replace them before a wear bandappears across the entire tread. WARNING When repl...

242 WARNING The traction grade assigned to this tireis based on braking (straightahead)traction tests and does not includecornering (turning) traction. Temperature A B C The temperature grades are A (the highest), B, andC, representing the tire’s resistance to thegeneration of heat and its ability t...

243 The all weather tread pattern on your tires helpsmaintain traction in rain or snow. However, toachieve the best traction in snow and iceconditions, you may need to use snow tires. To prevent body damage, do not use snow chainson your Mark VIII. WARNING Snow tires must be the same size andgrade a...

244 If the fuel door does not open when you push therelease button, open the trunk and find the overriderelease on the right side. The override release is ahandle which says FUEL FILLER DOOR RELEASEMANUAL OVERRIDE. Open the fuel door bypulling on the handle. The fuel filler door manual release — loc...

245 3. To replace the fuel cap, align the tabs on the cap with the notches on the filler pipe. Pushdown and turn it clockwise until it stops. 4. Push the fuel door closed. WARNING If you do not use the proper fuel cap,the pressure in the fuel tank candamage the fuel system or cause it towork imprope...

247 Cleaner Air Ford approves the use of gasolines to improve airquality, including reformulated gasolines that containoxygenates such as a maximum of 10% ethanol or15% MTBE. There should be no more than 5%methanol with cosolvents and additives to protectthe fuel system. Safety Information Relating ...

248 If you are taking the medication “Antabuse” orother forms of disulfiram for the treatment ofalcoholism, vapor or skin contact with agasoline-methanol blend, may cause the same kindof adverse reaction as drinking an alcoholicbeverage. In sensitive individuals, serious personalinjury or sickness c...

249 To calculate fuel economy: 1. Fill the tank completely and record the initialodometer reading. 2. Every time you buy fuel record the amount (ingallons or liters) purchased. 3. After at least three to five tankfuls, fill the fueltank and record the final odometer reading. 4. Use these equations t...

250 ❑ Extended use of the A/C, defroster, rearwindow defroster and other accessories ❑ Underinflated tires ❑ Heavy loads ❑ Aftermarket add-ons such as bike, ski or luggageracks, bug deflectors, etc. Self-Service Pointers If you choose to do your own fueling, you shouldalso perform a few simple maint...

253 How to Prepare Your Vehicle for Inspection/Maintenance (I/M) Testing In some localities it may become a legalrequirement to pass an Inspection/Maintenance(I/M) test of the On-Board Diagnostic (OBD) IIsystem. If the vehicle’s powertrain system or itsbattery has just been serviced, the OBD II syst...

254 The alignment of your headlamps should bechecked if: ❑ oncoming motorists frequently signal you to turnoff your vehicle’s high beams when you do nothave the high beams on ❑ the headlamps do not seem to give you enoughlight to see clearly at night ❑ the headlamp beams are pointed substantiallyawa...

256 4. Replace the high beam dust cap by aligningtabs and rotating clockwise 1/4 turn. 5. Replace the sight shield. Aiming Headlamps Your vehicle is equipped with a Vehicle HeadlampAim Device (VHAD) on each headlamp body. Eachheadlamp may be properly aimed in the horizontaldirection (left/right) and...

259 Bulb specifications File:11fnmc8.ex Update:Thu Jun 20 14:28:32 1996

260 Cleaning Your Vehicle Washing and Polishing Your Vehicle Wash the outside of your vehicle, including theunderside, with a mild detergent. DO NOT: ❑ Wash your vehicle with hot water ❑ Wash your vehicle while it sits in directsunlight ❑ Wash your vehicle while the body is hot Pollen, bird dropping...

262 Cleaning the Interior Lamps Your interior dome lamps and map lamps are plasticand should be cleaned with a mild detergentdiluted in water. Rinse them with clear water. Cleaning the Seats Leather For routine cleaning, wipe the surface with a soft,damp cloth. For more thorough cleaning, wipe thesu...

263 Capacities and Specifications Refill Capacities, Motorcraft Parts,and Lubricant Specifications Motorcraft Parts File:12fncs8.ex Update:Thu Jun 20 14:28:48 1996

264 Fluid Specifications and Capacities NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axlehas been submerged in water. Otherwise, the lubeshould not be checked or changed unless a leak issuspected or repair required. File:12fncs8.ex Update:Thu Jun 20 14:...

265 Lubricant Specifications File:12fncs8.ex Update:Thu Jun 20 14:28:48 1996

266 NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axlehas been submerged in water. Otherwise, the lubeshould not be checked or changed unless a leak issuspected or repair required. Vehicle Storage Maintenance Tips If you plan on storing your vehicle for ...

271 Customer Assistance If You Have a Service Problem Ford Motor Company has authorized Ford andLincoln-Mercury dealerships that can service yourvehicle for you. This chapter tells you how to getservice or maintenance for your vehicle. Service/Maintenance Concerns (U.S. or Canada) Ford recommends ta...

272 If you have any questions or concerns that thedealership cannot answer, contact the CustomerAssistance Center. If you still have a complaint involving a warrantydispute, you may wish to contact the DisputeSettlement Board (U.S. only) or the Canadian MotorVehicle Arbitration Plan (CAMVAP) in Cana...

273 What Kind of Cases Does the Board Review? The Board reviews all warranty performancecomplaints on Ford, Mercury and Lincoln cars andFord and Mercury light trucks under the newvehicle limited warranty that have not beenresolved by either a dealer or Ford Motor Company,except those involving: ❑ a ...

274 How does the Board Work? The Board consists of: ❑ three consumer representatives ❑ a Ford or Lincoln/Mercury dealer Consumer candidates for Board membership arerecruited and trained by an independent consultingfirm. Dealers are chosen because of their businessleadership qualities. What the Board...

276 To Request a DSB Brochure/Application For a brochure/application, speak to your dealer orwrite to the Board at the following address: Ford of Canada CustomerAssistance If you live in Canada and have any questions orconcerns that the dealership cannot answer, contactthe Lincoln Centre. Please hav...

277 Vehicle Identification Number (VIN/SerialNumber) Mediation/Arbitration Program (Canada Only) In those cases where you continue to feel that theefforts by Ford and the dealer to resolve afactory-related vehicle service concern have beenunsatisfactory, Ford of Canada participates in animpartial th...

281 Accessories Ford Accessories for Your Vehicle A wide selection of accessories is available throughyour local authorized dealer. These fine accessorieshave been engineered specifically to fulfill yourautomotive needs. They are custom designed tocomplement the style and aerodynamic appearanceof yo...

295 Index A ABS warning light (see Anti-lock brake system) . . . . . . . . . . . . 11 Accessory position on the ignition . . . . 83 Accident damage . . . . . . . . . . . . 216 Air bag supplemental restraint system . . . 145 and child safety seats . . . . . . . . . 151 description . . . . . . . . . ....

301 proper solution . . . . . . . . . . . 235 recovery reservoir . . . . . . . . . . 228 refill capacities . . . . . . . . . . . . 264 specifications . . . . . . . . . . . . 265 temperature gauge . . . . . . . . . . 17 Engine coolant temperature gauge. . . . . 17 Engine fan. . . . . . . . . . . . . ...

309 for infants. . . . . . . . . . . 150, 151 head . . . . . . . . . . . . . . . . 131 lap and shoulder belts . . . . . . . . 138 lap belt . . . . . . . . . . . . . . . 143 maintenance. . . . . . . . . . . . . 145 proper use . . . . . . . . . . . . . 138 replacement . . . . . . . . . . . . . 145 war...

314 Service Station Information File:17fngs8.ex Update:Thu Jun 27 10:02:28 1996