Fluke 1060AM-NM-LRVAR - Manuals

1060AM-NM-LRVAR Operators Manual 2-2 Electrical Requirements 120 VAC 50/60 Hz 120 VAC 50/60 Hz 120 VAC 50/60hz 2.3 Receiving Inspection Upon receipt of the unit: 1. Inspect the carton(s) and contents for damage. If damage is evident, file a claim with the carrier and notify Fluke Biomedical at 440.2...

1060AM-NM-LRVAR Operators Manual 2-4 2.6 Electrical interface The Local alarm (1060-024) requires power connections as follows: (See appendix A for the 1060-13 and 1060-024 drawings) Terminate the input power to TB2-1(L1) of the Local alarm assembly at the end of this installation . 1. Earth ground ...

Maintenance Maintenance and Cleaning 3 3-1 Section 3 Maintenance and Cleaning To prevent injury, do not remove or insert lamp when unit is energized . To prevent damage to the lens, do not use abrasive materials or cleaners Refer the parts lists for the required type of lamp After disconnecting powe...

1060AM-NM-LRVAR Operators Manual 3-2 1. Slide the acrylic yellow panel out from either side of the chassis . To prevent property damage and injury, do not touch glass with bare fingers. Grasp glass with a soft clean cloth or with packaging supplied with the replacement lamp. 2 . Gently push in on th...

Appendix Applicable Drawings and Parts List A A-1 Appendix A Applicable Drawings and Parts List 4.1 Applicable Drawings and Parts List 1060-005 Main Assembly 1060-005 Main Assembly Parts List 1060-010 Alarm PCB Assembly 1060-010 Alarm PCB Parts List 1060-013 Local Alarm Schematic 1060-024 Local Alar...