Page 2 - Prevent Entanglement Injury; when baby begins to push up on hands and knees.; Battery Safety Information
2 WARNING Consumer Information Prevent Entanglement Injury • Keep mobile out of baby’s reach.• Remove mobile portion of product from crib or playpen when baby begins to push up on hands and knees. • This product may not attach to all crib designs. Do not add additional strings or straps to attach to...
Page 3 - Parts
3 Parts Arm Note: All of the screws used to assemble this toy are attached to the product. Follow these instructions carefully to fully secure the screws. Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Base Crib Connector Mobile Hub 3 Long Spokes 3 Short S...
Page 4 - Remote; alkaline; Mobile Base; alkaline; Battery Installation
4 Remote • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert two "AAA" (LR03) alkaline batteries. • Replace the battery compartment door and tighten the screw. 1,5V x 3 “D” (LR20) Mobile Base • Loosen the screws in the...
Page 5 - Assembly
5 1 2 • Fit the crib connector to the base and tighten both screws. IMPORTANT! Make sure the straps are over the top of the crib connector. Crib Connector Base • First, press the button on the mobile base, next to the socket A and then slide the socket door open B . • Fit the arm into the socket in ...
Page 6 - both screws; Arm
6 Assembly • Attach a long spoke to the mobile hub, as shown. • Tighten the screw in the long spoke. • Repeat this procedure to attach the remaining long spokes to the mobile hub. • Fit the end of the arm to the socket on the mobile hub. • Tighten both screws in the arm to secure the mobile hub. Arm...
Page 7 - Short Spoke
7 Assembly • Attach a short spoke to the mobile hub, as shown. • Tighten the screw in the short spoke. • Repeat this procedure to attach the remaining short spokes to the mobile hub. Short Spoke 1 5
Page 8 - Consumer Information; CONSUMER ASSISTANCE
8 Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. T4265pr-0920 ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA FCC Statement (United States Only) This equipment has been tested and found to comply with the limi...
Page 9 - Crib Attachment; “click”; WARNING
9 Crib Attachment • Position the base so that the decorated side faces the inside of the crib. • Fit the base onto the crib top rail. Hint: The base is designed to fit most crib designs. Please refer to the main illustration and the inset photograph. • Make sure the top strap is hanging over the cri...
Page 11 - Mattress
11 Crib Attachment • Tie the base strings to a crib spindle. Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied. • If the distance between the base and the mattress is less than 7 Inches (18 cm), lower the crib mattress. Mattress Mattress At Least 7 Inches ...
Page 12 - Use; For best results make sure the path between the
12 Use IMPORTANT! • In the unlikely event that use of the remote interferes with normal use of other remote controlled equipment, such as televisions, stereos, or use of other electronic or battery powered appliances interfere with operation of the mobile, do not use both appliances at the same time...
Page 13 - Music Buttons
13 Power/Volume Switch Power/Volume Switch • Slide the switch to ON with low volume or ON with high volume . When finished using the product, slide the switch OFF . Mode Select Switch Mode Select Switch Slide the switch to select a mode: Music and Motion Music only Light Control Button Light Control...
Page 14 - Convert to Night Light; Remove the mobile and use as a music box with a night light!
14 Convert to Night Light Remove the mobile and use as a music box with a night light! • Loosen both screws in the arm near the mobile base. Lift and remove the arm. • Close the socket door on top of the mobile base. • Store the mobile in a safe place for future use.