Fisher-Price P6946 - Manuals

6 • Fasten the pad buckles on the front edge of the pad and underneath the seat. Make sure you hear a “snap” on both sides. Pad Buckles • Fasten the pad buckles around each side rail.• Press the fasteners together in the seat back portion of the pad. Pad Buckles Side Rail PRESS SEAT BACK Infant Seat...

7 • Place the front curved base on a flat surface so that it curves away from you. • Place the back base on a flat surface, behind the front curved base. • Position the leg assemblies so that the hubs are facing each other. • Fit the ends of the legs over the ends of the front and back bases, as sho...

9 Swing Frame Assembly Retainer with Lock Nut • Fit a retainer with lock nut onto the end of the screw and to the seat tube support. Hint: A lock nut has been factory assembled to the retainer. During shipment, the lock nut may have fallen out of the retainer. If it has, please fit it into the hexag...

10 Setup and Use To prevent injury or death from falls or being strangled in the restraint system • Never leave child unattended. When used as a Swing: • Always use the restraint system.• Never use with an active child who may be able to climb out of the product. When used as an Infant Seat or Rocke...

11 Seat Tube Hub • Rotate the kickstand up.• Push down on the seat bottom to be sure the kickstand is in position. • Grasp the handles on the seat.• Slide the seat between the seat tubes. • Fit the groove in each handle to the seat tubes. Handles Kickstand Swing 1 Seat Tubes Groove • Now, lower the ...

13 Kickstand • Rotate the kickstand out.• Push down on the seat bottom to be sure the kickstand is in position. • Fit the plugs on each end of the toy bar into the sockets in each side rail. Plugs Toy Bar Infant Seat 1 2 • Rotate the kickstand up.• Push down on the seat bottom to be sure the kicksta...

14 • Place your child in the seat. Position the restraint pad between your child’s legs. • Fasten the restraint straps to the restraint pad. Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint syst...

15 • Grasp handles on the seat.• Lift the seat from the seat tube hubs A . • Pull the seat forward B . Removing the Seat from the Swing Handles A B Seat Tube Hubs

Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA P6946pr-0726 • Press the button on each housing and push the rear legs toward the front legs. Stand the frame agai...