Page 2 - Prevent injury from burns:; Do not place; WARNING; Consumer Information
2 Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair i...
Page 3 - Assembled Parts; CAUTION
3 2 Frames Pad Seat Bottom Seat Back Front Base Back Base Footrest 2 Seat Bottom Tubes Hinge Rod Food Tray Base Tray Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. #8 x 1,9 cm Screws – 8 #10 x 2,2 cm Black Screw – 7 Shown Actual Size Assembled Parts C...
Page 4 - Assembly
4 IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price ® for replacement parts and instructions if needed. Never substitute parts. Footrest Seat Bottom • Pla...
Page 5 - black
5 Insert Screws Here • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. Tighten the screws. This may require extra force. Assembly 4 Seat Back Pin • Turn the seat bottom assembly upright.• Fit the seat back pins into the slots in the top side of the seat bottom ass...
Page 10 - Secure Child; To tighten the waist belts:
10 Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • Do not use the high chair unless all com- ponents are correctly fitted and adjusted. • Place y...
Page 11 - To change shoulder belt slots:; To tighten the shoulder belts:; and
11 To change shoulder belt slots: • From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots. Secure Child 5 Hold Adjuster Pull Down Strap Slide Adjuster Down TIGHTEN LOOSEN To tighten the shoulder belts: Hold the adjuster and pull the front ...
Page 12 - Using the Trays; The child should at all times
12 • While pushing the release bar on the front of the base tray, adjust the base tray forward or backward. Using the Trays 8 Base Tray Armrest Armrest • Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place. Hint: Before use, thoroughly wash all parts (t...
Page 14 - It is recommended that only; To adjust the seat angle:; Adjusting the Seat; To adjust the seat height:
14 Squeeze Prevent serious injury or death from falls or sliding out: It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. Upright Semi-Recline R...
Page 15 - Storage; Care
15 Storage Pull Frame Release Latch • With the legs all the way open, lower the seat to position 7 (the lowest position). • Pull the frame release latches forward and push the rear legs toward the front legs. 13 • The restraint system, pad, frame, trays and tray toy may be wiped clean using a mild c...