Page 2 - Battery Installation; Base Unit; Microphones; alkaline
Battery Installation Base Unit • Locate the battery compartment on the bottom of the base unit. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert four “AA” (LR6) alkaline batteries. • Replace the battery compartment door and...
Page 3 - Battery Safety Information; in a fire. The batteries inside may explode or leak.
Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium...
Page 4 - Your TV or VCR must
Connecting Your Star Station ® to Your TV or VCR Important! Your TV or VCR must have audio and video input jacks. Camera Two Microphones ROM Cartridge Power/Volume Track Forward/Back Play/Pause Reset Power Light
Page 5 - Dial
• Position Star Station ® near your TV (or VCR) or on the floor in front of your TV. Important! Do not place Star Station ® on top of your TV. Keep excess cable off the floor and out of the way. • Make sure the power/volume dial on Star Station ® is off. The power light should be off . • Turn your T...
Page 6 - on; Power Light
• Rotate the power/volume dial to turn power on. The power light turns on. Hint: Do not turn the volume all the way up. Start at a lower setting.• Turn your TV or VCR on . Power/Volume Dial 5 • To find the picture transmitted on your TV screen, set your TV's or VCR's mode selector to INPUT or VIDEO ...
Page 7 - use Star Station; The light source should NOT; Front Lighting
No Image? If you do not see an image on your TV screen transmitted from Star Station ® , try the following:1. Verify that your audio and video cable is fully inserted into your TV or VCR.2. Press the channel down button on the TV or VCR and check for an INPUT channel below channel 2. 3. Use the menu...
Page 9 - Additional ROM; Care
If Star Station ® is connected to your VCR, you can record performances. Simply insert a blank tape and press record on your VCR. Recording Your Performances You can connect Star Station ® to an external music source such as a portable music player or stereo so you can sing-along to other music!1. T...
Page 10 - Troubleshooting Guide; PROBLEM
Troubleshooting Guide PROBLEM CAUSE SOLUTION No image on the TV TV or VCR is not set to proper input Press the channel down button on the VCR or TV and check for an INPUT channel below channel 2.Use the menu system on your TV or VCR to find INPUT or SOURCE. Change to INPUT or SOURCE.Consult your TV'...
Page 11 - Connecting to a TV or VCR and TV; Note: Input jacks may be on the back of your TV or VCR.
TV INPUT AUDIO IN LEFT RIGHT VIDEO IN VCR OR White Red Yellow TV Connecting to a TV or VCR and TV Note: Input jacks may be on the back of your TV or VCR. One (1) Year Limited Warranty Mattel Australia Pty., Ltd., (658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia) warrants to the...
Page 12 - Consumer Information
Consumer Information Visit us on-line at www.service.fisher-price.com AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland. ASIA: Mattel ...