Page 2 - Prevent serious injury or death from falls or sliding out:; the seat without help (about 2; WARNING
Prevent serious injury or death from falls or sliding out: • Always secure child with the restraint belts until child is able to get in and out of the seat without help (about 2 1 / 2 years old). The tray is not designed to hold child in the seat. • Never leave child unattended.• Always secure the s...
Page 3 - Care
3 IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.• Please read these instructions be...
Page 4 - “snaps”; Assembly; lowest slots
4 • Fit the pad onto the seat. • Fit the seat back tabs into the slots in the top of the seat. • Push the top of the seat back so that the large tab “snaps” into place in the seat. Seat Assembly Seat Back Large Tab Slot Pad 1 2 Tab • Fit the waist belts on the seat through the lowest slots in the pa...
Page 5 - If the end does not fit at all through the slot, you are; This will require some force. You may want to pull; Adjusting the Seat Height
5 • Insert the shoulder belts through the slots in the pad. - Use the lower shoulder belt slots for a smaller baby. - Use the upper shoulder belt slots for a larger baby. • Make sure the shoulder belts are not twisted. 5 Upper Slots Lower Slots • Locate the longer portion of the shoulder belt, under...
Page 6 - Attaching to a Chair; Place the product on a chair on a level, stable; Prevent serious injury or death; Always secure the seat on a chair
6 Attaching to a Chair 1 IMPORTANT! Place the product on a chair on a level, stable surface, away from electrical flexes. Be sure to keep electrical flexes out of child’s reach.• Place the seat on a chair.• Wrap the bottom straps around the bottom of the chair . Buckle the straps B . Make sure you h...
Page 7 - Only use upright position when child is; Adjust Seat Recline; Upright; Recline
7 • While pulling the seat recline latch, push the top of the seat back to lower in the desired position. Or, while pulling the seat recline latch, push the bottom of the seat to lift in the desired position. • Release the seat recline latch. • Push on the seat back to be sure the seat is secure. Hi...
Page 8 - Adjust Armrests; Upright Seating; • While pressing the armrest button, rotate the armrest
8 Adjust Armrests Upright Seating Semi-Recline Seating Recline Seating • While pressing the armrest button, rotate the armrest forward or backward to the desired position. • Repeat this procedure to adjust the other armrest. Armrest Button PRESS
Page 9 - Secure Child; Prevent serious injury or death from; • Always secure child with the; • Place your child in the seat. Position the crotch belt; Make sure; • Check to be sure the restraint system is securely attached; To loosen the waist belts:; LOOSEN; To tighten the waist belts:; TIGHTEN
9 Secure Child Prevent serious injury or death from falls or sliding out: • Always secure child with the restraint belts until child is able to get in and out of the seat without help (about 2 1 / 2 years old). The tray is not designed to hold child in seat. • Never leave child unattended. WARNING •...
Page 10 - Tray Use; Before first time use, wash the tray thoroughly with; Always secure child with the belts
10 Tray Use Hint: Before first time use, wash the tray thoroughly with soap and water. • Fit the tray onto the armrests. Push down until the tray “snaps” into place. 1 Tray Armrests Prevent serious injury or death from falls or sliding out: Always secure child with the belts until child is able to g...
Page 11 - This high chair easily converts to a booster high chair; • Push to remove the shoulder belts from the waist restraint; Convert to Booster Seat
11 • Fit the shoulder belts back through the slots in the pad.• Lift the top of the pad off of the seat back. 2 Shoulder Belts This high chair easily converts to a booster high chair for toddlers. Shoulder Belts • Push to remove the shoulder belts from the waist restraint buckle slots. 1 Convert to ...
Page 12 - • Pull the tab on the seat back. Lift to remove the seat back
12 Waist Belts • Fit the crotch belt down through the slot in the pad.• Fit the waist belts back through the slots in the pad.• Remove the pad from the seat. Crotch Belt Seat • Pull the tab on the seat back. Lift to remove the seat back from the seat. • Store the seat back, pad and shoulder belts in...