Fisher-Price H9998 - Manuals

Page 2 - WARNING; begins to push up on hands and knees.; Parts; CAUTION; according to the instructions. Check frequently.

2 WARNING • Possible entanglement injury. Keep out of baby's reach.• Remove mobile portion from crib or playpen when baby begins to push up on hands and knees. Parts CAUTION This toy contains small parts in its unassembled state. Adult assembly is required. • A crib mobile is intended for visual sti...

Page 3 - Battery Installation; compartment door; alkaline; We recommend using

3 Battery Installation BatteryCompartmentDoor • Locate the battery compartment door on the back of the base.• Loosen the screws in the battery compartment door and remove the battery compartment door • Insert four "C" (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for...

Page 4 - Battery Safety Information; under adult supervision.

4 Battery Safety Information 1.5V x 4 “C” (LR14) In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechar...

Page 5 - Assembly; • Fit the crib adapter to; • Fit the peg on a disc onto

5 Assembly • Fit the crib adapter to the base. • Tighten the three screws in the crib adapter. Crib Adapter 11 • Fit the peg on a disc onto one of the posts on the frame, as shown. • Tighten the screw in the disc. • Repeat this procedure to attach the other two discs to the frame. Disc 1 2 Frame

Page 6 - • Fit the dome into the end; the frame to the

6 Assembly • Fit the dome into the end of the arm. • Tighten the screw in the dome. Dome Arm 1 3 • "Snap" the frame to the underside of the dome,as shown. 1 4 Frame Dome

Page 7 - • Slide the arm into the; Mobile Attachment; • Fit a soft toy strap up through a; Base Attachment; OR

7 Assembly • Slide the arm into the opening in top of the base. • Tighten the screw in the arm. 1 5 You can attach the soft toys to either the mobile (over baby's head) or to the base (insidethe crib). Mobile Attachment • Fit a soft toy strap up through a slot in a disk. Pull down on the strap so th...

Page 8 - Crib Attachment; • Fit the base on the crib; To prevent entrapment of baby's head, keep distance

8 Crib Attachment • Fit the base on the crib top rail, so that the threaded peg extends outside the crib. • Fit the clamp onto the threaded peg and turn the clamp clockwise to secure the base to the crib rail. Do not over-tighten the clamp. 1 7 Base Crib Top Rail Clamp • If the distance between the ...

Page 9 - Lights, Sounds and Gentle Motions; Set to this position for lights and motions without music.

9 Lights, Sounds and Gentle Motions Press to choose fromclassical musical selections. Press to turnlights on or off. Press tochoose lullabies. Press to start or stop the motion. Locate the mode switch on the top of the base.Slide the switch to one of the following positions: Enjoy about 10 minutes o...

Page 10 - Change to a Crib Side Music Box; • Loosen the screw in the

10 Change to a Crib Side Music Box • Loosen the screw in the arm and remove the arm from the base. 1 2 When baby outgrows the mobile, follow these steps to convert to a music box with ceiling projection. • Slide the latches on the underside of the dome and pull to remove the frame. Set the frame asi...

Page 12 - Care; Soft Toys; Tumble dry on low heat. Do not use bleach.; Mobile Base, Arm and Dome; Do not immerse the toy.; Consumer Information

12 Care Soft Toys • Place the soft toys in a pillowcase and wash them in cold water on gentle cycle. Tumble dry on low heat. Do not use bleach. Mobile Base, Arm and Dome • Wipe the toy with a clean cloth dampened with a mild soap and water solution. Do not immerse the toy. FCC Statement (United Stat...