Page 3 - CONTENTS
3 CONTENTS Safety and warnings 4 Vacuum seal drawer models 5 Unpack your product 6 Electrical specifications 6 Parts supplied 7 Tools required 7 Product dimensions - minimal & contemporary models 8 Cabinetry dimensions - minimal & contemporary models 9 Installation options 10 Prior to instal...
Page 4 - SAFETY AND WARNINGS; Tip Hazard
4 SAFETY AND WARNINGS ! WARNING! Tip Hazard This product may tip. Keep children away and take care. Failure to follow this advice may result in injury. • Drawer must be secured in place by supplied screws. • Ensure there is a fixed shelf directly above the drawer if it is not installed under anothe...
Page 5 - READ AND SAVE THIS GUIDE; Electrical
5 SAFETY AND WARNINGS VACUUM SEAL DRAWER MODELS READ AND SAVE THIS GUIDE To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance.Installation z Please make this information...
Page 6 - Supply
6 UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the Vacuum Seal Drawer and accessories box from the packaging. Recycle the materials that can be reused. Dispose packaging materials in accordance with local regulations on waste disposal.Inspect the Vacuum Seal Drawer for any signs of damage. D...
Page 7 - PARTS SUPPLIED; External vacuuming accessories kit
7 Installation guide Service & Warranty S E RV I C E & WA R R A N T Y S E RV I C E E T G A R A N T I E ΣΈΡΒΙΣ Κ ΑΙ ΕΓΓΎΗΣΗ S E RV I Z I O E G A R A N Z I A S E RV I C E & G A R A N T I E H U O LTO JA TA KU U S E RV I C E O G G A R A N T I 保 修 和 维 修 服 務 和 保 修 I N STA L L AT I O N G U I D ...
Page 8 - PRODUCT DIMENSIONS - MINIMAL & CONTEMPORARY MODELS; PRODUCT DIMENSIONS; PLAN
8 PRODUCT DIMENSIONS - MINIMAL & CONTEMPORARY MODELS Actual product dimension may vary by ± 2 mm. PRODUCT DIMENSIONS VB60SD MM A Overall height of drawer 140 B Overall width of drawer 596 C Overall depth of drawer* 566 D Height of chassis 140 E Width of chassis** 556 F Depth of chassis*** 546 G ...
Page 9 - CABINETRY DIMENSIONS - MINIMAL & CONTEMPORARY MODELS; CABINETRY DIMENSIONS; Minimum inside height of cavity
9 CABINETRY DIMENSIONS - MINIMAL & CONTEMPORARY MODELS Actual product dimension may vary by ± 2 mm. CABINETRY DIMENSIONS VB60SD MM A Minimum inside height of cavity 142 B Minimum inside width of cavity 560 C Minimum inside depth of cavity 572 D Overall width of cabinetry 600 E Minimum clearance ...
Page 10 - INSTALLATION OPTIONS
10 FRONT PROFILE Suitable for Minimal and Contemporary 60cm Vacuum seal drawers. A fixed shelf must be installed above the drawer. STANDALONE INSTALLATION COMBINED WITH SINGLE OVEN COMBINED WITH COMPANION PRODUCT The 60cm Vacuum seal drawer can fully support a 60cm Fisher & Paykel wall oven. PRO...
Page 11 - PRIOR TO INSTALLATION; INSTALL THE AIR FILTER; Insert the locking cap in the holder.
11 PRIOR TO INSTALLATION Locate the attachment position of the anti-tip brackets in both sides of the cabinetry, Ensure the location of the anti-tip brackets matches the location of the side brackets of the drawer.Refer to 'Product dimensions' for location of side brackets. Secure the anti-tip brack...
Page 12 - Open the drawer and extend fully.; INSTALLING THE DRAWER
12 Connect the power plug into the power outlet.Slide the drawer carefully into the cabinetry. 2 Push the drawer back into the cabinetry, and align the front panel* with the cabinetry as desired.Ensure the side brackets engages the anti-tip brackets. Open the drawer and extend fully. Secure the atta...
Page 13 - ADJUSTING THE HEIGHT; Open the drawer fully, and slightly loosen the two screws.
13 ADJUSTING THE HEIGHT Open the drawer fully, and slightly loosen the two screws. 1 2 3 Adjust to the required height and then re-tighten the screws. The height is adjustable within 5mm. Close the drawer and check the alignment. Adjust again if necessary. The front panel of the drawer can be adjust...
Page 14 - ON/OFF GLOWS RED UNTIL BUTTON IS PRESSED; ON/OFF GLOWS RED UNTIL BUTTON IS PRESSED; Complete and keep for safe reference:; INSTALLER CHECKLIST
14 F the vacuum seal drawer is level and securely fitted to the cabinetry to F any internal packaging has been removed from the drawer F the isolating switch is accessible by the customer F the bottom shelf can fully support the total weight of the combined appliances F Open the drawer. F Press the ...
