Fisher & Paykel HC90 - Manuals

4 WARNING! Hot Surface Hazard Make sure the elements or gas burners of the cooking surface always havepans/pots on them and never heat the filter(s) of your appliance directly.When frying, never leave pans unattended as there is a risk of the oil overheating and catching fire.If reusing frying oil, ...

5 Safety and warnings Important safety instructions Make sure that the room in which the appliance is used has adequate ventilation, especially when other appliances burning gas or other fuels are being used at the same time. For island models, make sure the ceiling is able to withstand the total we...

7 Using your VentSurface 1 2 3 4 5 6 1 Fan on/off (Stand-by) 2 Decreases fan speed 3 Mode, speed and cleaning alert display 4 Increases fan speed 5 Timer 6 Lamps on/off Using your VentSurface for the first time or after a long holiday 1 Make sure your cooker or cooktop is turned off and there are no...

8 Using your VentSurface Choosing between normal and high power modes These two modes give you flexibility and optimum VentSurface performance to suit your changing cooking activities. Use normal mode for everyday cooking purposes, and high mode during longer periods of intensive cooking (eg holiday...

9 Using your VentSurface Using your VentSurface in automatic mode When the VentSurface is in automatic mode, its sensor will automatically turn the fan on, adjust its speed and turn the fan off as needed. To illuminate your cooking area, press the button. Note: your VentSurface will revert to the de...

10 Using the timer (in manual mode only) When the timer is activated the VentSurface will run for 10 minutes and then turn off automatically. the selected fan speed will flash in the display while the timer is counting down. To activate the timer 1 Select a fan speed between “1” and “5”. 2 Press the...

11 Care and cleaning Important! Always disconnect the appliance from the mains electricity supply before carrying out any servicing or maintenance. Failure to do so may result in death or electrical shock. Do not let grease deposits accumulate on your VentSurface, as these could create a fire hazard...

12 To replace the carbon filter 1 Stop/reset the carbon filter alert signal. If “C” is flashing in the display alternately with the fan speed setting, turn the VentSurface off by pressing the button, then press the and buttons simultaneously and hold down for five seconds until you hear a beep. “8” ...

13 Care and cleaning Cleaning the stainless steel surfaces Do not use abrasive cleaners, cloths or pads to clean your VentSurface. Wipe the stainless steel surfaces often, using warm water and a mild household detergent. The stainless steel may also be cleaned with a suitable cleaner and polish. Not...

14 Troubleshooting Troubleshooting chart Problem Cause What to do “A “ flashing alternatelywith the fan speedsetting. The aluminium mesh filter needscleaning (automaticalert). Clean the aluminium mesh filter following the instructions in ‘Care and cleaning’. “C” flashing alternatelywith the fan spee...

15 Warranty and service Manufacturer’s warranty When you purchase any new Fisher & Paykel rangehood you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing. Fisher & Paykel undertakes to Repair or, at its option, replace without cost to the owner ...

16 Warranty and service Customer care Check the things you can do yourself. Refer to your User Guide and check: 1 your appliance is correctly installed 2 you are familiar with its normal operation If after checking these points you still need assistance please refer to the following: In New Zealand ...

17 Warranty and service Product details Fisher & Paykel Ltd Model Serial No. Date of Purchase Purchaser Dealer Suburb Town Country