1 Water filter IMPORTANT! ● ● The water connection to your ice & water refrigerator must be installed by a qualified plumber or Fisher & Paykel trained and supported service technician and comply with all state and local laws. ● ● Installation and use MUST comply with all state and local plu...
Page 4 - installed in the recommended orientation).; After installation, the water filter MUST be flushed.; – It is not unusual for a few drops; FOR REFRIGERATORS WITH EXTERNAL FILTER
2 Note: It is not necessary to turn the water supply off when removing or installing the water filter. Removing the old filter Installing the new filter 1 Remove the plastic wrapping from the new filter and then remove the protective cap. 2 Align the filter correctly. Insert the filter into the filt...
Page 5 - FOR ACTIVESMARTTM INTEGRATED REFRIGERATORS; Removing the old filter; The filter is located behind the toe kick grille.; Installing the new filter; Ensure the filter is in the locked position (; After installation, the water filter MUST be
3 3 FOR ACTIVESMART™ INTEGRATED REFRIGERATORS Removing the old filter The filter is located behind the toe kick grille. 1 Remove toe kick grille by inserting fingers into the left and right square openings on the grille. Pull grille towards you. 2 Pull the freezer drawer out slightly, the filter is...
Page 6 - Flushing the water filter; For Automatic Ice only models:; Resetting the filter indicator; To reset indicator; WATER FILTER FLUSHING INSTRUCTIONS (ALL MODELS)
4 Flushing the water filter ● ● Check your refrigerator is switched on. ● ● Allow at least 2 hours for your appliance to cool before use. ● ● Complete all the flushing steps detailed in this document to ensure optimum performance of your water filter. For Ice & Water only models: Flushing must b...