1 1 SAFETY AND WARNINGS 847200 – Certified by: IAPMO R&T against NSF/ANSI Standards 43, 53, 401 and CSA B4831.1 for the reduction of claims specified on the performance data sheet and at iapmort.org. 847200 compounds certified under NSF/ANSI 401 have been deemed as incidental contaminants/emerg...
Page 4 - Removing the old filter; FOR FREESTANDING REFRIGERATORS
2 Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. 3 Hold the base of the filter firmly and pull towards you ( B ). C 4 Rotate the filter counterclockwise 90°. The filter s...
Page 6 - FOR REFRIGERATORS WITH EXTERNAL FILTER
4 3 FOR REFRIGERATORS WITH EXTERNAL FILTER Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. B C A 3 Pull down vertically to remove the filter from the bracket ( C ). Disca...
Page 7 - Installing the new filter
5 1 Remove the plastic wrapping from the new filter. 2 Pull the filter head towards you ( A ). E 5 Push the entire filter back into the bracket ( E ). IMPORTANT! After installation, the water filter MUST be flushed. Refer to ‘Flushing the water filter’ for details. 3 FOR REFRIGERATORS WITH EXTERNAL...
Page 8 - FOR INTEGRATED COLUMNS REFRIGERATORS
6 4 FOR INTEGRATED COLUMNS REFRIGERATORS Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. E D 1 Open the water filter hatch to access the filter ( A ), press the hatch in ...
Page 10 - FOR ACTIVESMARTTM INTEGRATED REFRIGERATORS
8 4 FOR ACTIVESMART™ INTEGRATED REFRIGERATORS Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. The filter is located behind the toe kick grille. 1 Remove toe kick grille b...
Page 11 - Flushing the water filter; Resetting the filter indicator; WATER FILTER FLUSHING INSTRUCTIONS (ALL MODELS)
9 Flushing the water filter ● ● Check your refrigerator is switched on. ● ● Allow at least 2 hours for your appliance to cool before use. ● ● Complete all the flushing steps detailed in this document to ensure optimum performance of your water filter. For Ice & Water only models: Flushing must b...
