First Alert N8891-1 - Manuals

– 6 – 6<67(029(59,(: About the Master Keypad General IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has oc-curred during your absence and an intruder may still be on the premises. LEAVEIMMEDIATELY and CONTACT THE POLICE from a nearby safe location. The keypad allows y...

– 7 – 6<67(029(59,(: About the Display and Indicators Display Definitions (for other displays, see Trouble Messages on page 27) ALARM: Appears when an intrusion hasbeen detected and the system isarmed (also appears during a firealarm or audible emergencyalarm). Accompanied by theprotection zone i...

– 8 – 6<67(029(59,(: Master Keypad Definitions NOTE: The system functions described below are for reference only, and require additional key entries to activate. 1. DISPLAY WINDOW: Liquid Crystal Display(LCD). Displays protection point identificationand system status, messages, and user instructi...

– 10 – 6(&85,1*7+(35(0,6(6 Checking System Status General Information Before arming your system, all protected doors, windows, and other protection zonesmust be closed or bypassed (see the BYPASSING PROTECTION section). Pressing the STATUS key will announce all zones that are faulted, as well as...

– 11 – 6(&85,1*7+(35(0,6(6 Arming the System Arming in Stay Mode Use this mode when you are staying home, but expect someone to use the entrance doorlater. Close all protected perimeter windows and doors before arming. The greenREADY indicator on the keypad should be lit if the system is ready t...

– 12 – 6(&85,1*7+(35(0,6(6 Arming the System Arming the System With No Delay Use NO DELAY with STAY mode when you are staying home and do not expect anyoneto use the entrance door. Use NO DELAY with AWAY mode when the premises will be vacant for extendedperiods of time such as vacations, etc. Wh...

– 13 – 6(&85,1*7+(35(0,6(6 Entry/Exit Delays Exit Delay Exit delay begins immediately after arming the system, and gives you time to leavethrough the designated exit door without setting off an alarm. A slow beeping will soundthroughout the exit delay period, if programmed. Exit Alarms Exit Alar...

– 14 – 6(&85,1*7+(35(0,6(6 Disarming the System Use the OFF key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information which will help youto distinguish between fire and burglary alarm sounds. IMPORTANT: If you return and the...

– 15 – 6(&85,1*7+(35(0,6(6 Bypassing Protection Zones Bypassing Individual Zones Use the BYPASS key when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarmwhen violated while your system is armed. All bypasses ...

– 16 – 6(&85,1*7+(35(0,6(6 Panic Keys / Chime Mode Panic Keys Your system may have been programmed to use special keys to manually activate panicfunctions. The functions that might be programmed are listed below. See your installer forthe function(s) that may have been programmed for your system...

– 17 – 86(5)81&7,216 Paging Feature Automatic Paging If the Paging feature has been programmed for your system, your pager will respond tocertain conditions as they occur in your system by displaying a message that indicates thetype of condition that has occurred. The message appears in a 7-digi...

– 18 – 86(5)81&7,216 Using Device Commands (Lights On/Lights Off Keys) General Information Your system may be set up so that certain lights or other devices can be turned on or offby using the device command from the keypad. Ask your installer if this has been done inyour system. If programmed f...

– 19 – 86(5)81&7,216 Message Recording/Playback/Volume Control Recording a Message Your system can record a brief message (up to 20 seconds) that can be played back later. To record a message: FUNCTION + RECORD The keypad beeps and displays “REC MESSAGE.” Begin speaking into the microphone. NOTE...

– 20 – 86(5)81&7,216 AUX FUNCTION General Information The AUX key may have been programmed to either perform a predefined function or to send a preset message to a pager (see PAGER FEATURE section for pager operation).Ask your installer which function has been assigned for your system. AUX Key: ...

– 21 – 86(5)81&7,216 Clock/Calendar Setting the Time and Date Your system can display the current time (see your installer). The date is not displayed,but has an internal function. The system must be disarmed with no faults present. To set the time and date: + FUNCTION + [63] Master Code or Inst...

– 22 – ),5($/$506<67(0 (If Installed) General Your fire alarm system (if installed) is active 24 hours a day, providing continuousprotection. In the event of an emergency, the installed smoke and heat detectors willautomatically activate your security system, triggering a loud, intermittent sound...

– 23 – ),5($/$506<67(0 National Fire Protection Assn./Smoke Detectors With regard to the number and placement of smoke and heat detectors, we subscribe tothe recommendations contained in the National Fire Protection Association's (NFPA)Standard #74 noted below. Early warning fire detection is bes...

– 24 – ),5($/$506<67(0 Emergency Evacuation Establish and regularly practice a plan of escape in the event of fire. The following stepsare recommended by the National Fire Protection Association: 1. Position your detector or your interior and/orexterior sounders so that they can be heard by alloc...

– 25 – 6<67(0)81&7,216 Security Codes General Information For additional security, users other than you who do not need to know your code can beassigned different security codes. These secondary users are identified by "user numbers"when their codes are assigned. You can assign up to ...

– 26 – 6<67(0)81&7,216 Testing the System (to be conducted weekly) Entering Test Mode The TEST key puts your system into the Test mode, which allows each protection point to be checked for proper operation. The keypad sounds a single beep every 45 seconds asa reminder that the system is in th...

– 27 – 6<67(0)81&7,216 Trouble Messages Typical Trouble Condition Displays To silence the beeping sound for fault conditions, press any key. FAULT Indicates that a problem exists with the zone(s) displayed, accompanied byrapid beeping. First, determine if the zone(s) displayed are intact and ...

– 28 – 6<67(0)81&7,216 Maintaining your system The components of your security system are designed to be as maintenance-free aspossible. To make sure that your system is in working condition, do the following:1. Test your system weekly.2. Test your system after any alarm occurs (see the TESTI...

– 29 – 6XPPDU\2I$XGLEOH1RWLILFDWLRQ ** UPPER CASE indicates announcements after pressing STATUS once. Lower case indicates announcements after pressing STATUS twice. SOUND CAUSE DISPLAY ANNOUNCEMENT** INTERRUPTEDSpeaker and externalpiezo and bell FIRE ALARM FIRE ALARM is displayed; zone number inala...

– 30 – UL NOTICE: This is a "Grade A" residential system. FCC STATEMENT FCC ID: CFS8DLLYNXCANADA: 17481021165ATHIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THEFOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,AND (2) THIS DEVICE MUST ACCEP...

– 31 – FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 NOTICE This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label thatcontains, among other information, the FCC registration number and ringer equivalence number (REN) forthis equipment. If requested,...

– 32 – CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) STATEMENT NOTICE The Canadian Department of Communications label identifiescertified equipment. This certification means that the equipmentmeets certain telecommunications network protective,operational and safety requirements. The Department does n...

– 33 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeowner's insurance carrier for possible premium credit. A. GENERAL INFORMATION: Insured's Name and Address: Insurance Company: Policy No.: First Alert’s ReadyGuard Other ___________________________...

– 34 – OWNER'S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS Furnace Room Kitchen Bedrooms Attic Basement Living Room Dining Room Hall F. BURGLARY DETECTING DEVICE LOCATIONS: Front Door Basement Door Rear Door All Exterior Doors 1st Floor Windows All Windows I nterior Location...

– 35 – SERVICING INFORMATION Your local First Alert Professional dealer is the person best qualified to service youralarm system. Arranging some kind of regular service program with him is advisable. Your local First Alert Professional dealer is: Name: Address: Phone:

– 39 – WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or otheremergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a var...

ONE YEAR LIMITED WARRANTY Pittway Corporation, and its divisions, subsidiaries and affiliates ("Seller"), 165 Eileen Way, Syosset, New York 11791,warrants its First Alert security equipment (the "product") to be free from defects in materials and workmanship for oneyear from date of ...