FieldServer FS-8700-24 - Manuals

Page 2 - Table of Contents; TABLE OF CONTENTS; Provided by the Supplier of 3; FieldServer Technologies

FS-8700-24 ControlNet Driver Manual Table of Contents TABLE OF CONTENTS 1. ControlNet Description ................................................................................................... 3 2. Driver Scope of Supply..............................................................................

Page 3 - ControlNet Description

FS-8700-24 ControlNet Driver Manual Page 3 of 12 1. ControlNet Description The ControlNet driver allows the FieldServer to transfer data to and from devices using ControlNet protocol. The SST 5136-CN-ISA Communications Adapter card is included with the FieldServer. The FieldServer can communicate us...

Page 4 - Description; ControlNet Tools CD; Party Equipment; DESCRIPTION; ControlNet Network with cables and terminators

FS-8700-24 ControlNet Driver Manual Page 4 of 12 2. Driver Scope of Supply 2.1. Supplied by FieldServer Technologies for this driver FieldServer Technologies PART # Description SST 5136-CN-ISA Communication Adapter - complete with BNC Tee Connector ControlNet Tools CD ControlNet Module User’s Guide ...

Page 5 - Connections

FS-8700-24 ControlNet Driver Manual Page 5 of 12 3. Hardware Connections The FieldServer is connected to the ControlNet Network with 75 ohm coaxial cable. If the ControlNet is not wired in redundant mode, ensure that all connectors are connected to the COM A port. A 75 ohm terminator must be placed ...

Page 6 - Notes; Section Title; Bridge; Column Title; MacId for the FieldServer; Example

FS-8700-24 ControlNet Driver Manual Page 6 of 12 3.1. Connection Notes Before connecting the FieldServer to the network, the FieldServer MacId should be set. The MacId is the term used for a ControlNet station address. The ControlNet MacId of the FieldServer is set to the System_Station_Address spec...

Page 7 - Server Side Connection Descriptors

FS-8700-24 ControlNet Driver Manual Page 7 of 12 4. Configuring the FieldServer for Unscheduled ControlNet Access with PCCC messaging For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upo...

Page 9 - Driver Specific Map Descriptor Parameters

FS-8700-24 ControlNet Driver Manual Page 9 of 12 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web :www.fieldServer.com Tel : (408) 262-2299 Fax : (408) 262-9042 Toll_Free : 888-509-1970 email : [email protected] 4.3.2. Driver Specific Map Descriptor Parameters Colum...

Page 10 - Driver Manual; Unscheduled Map Descriptor Example; The following Map Descriptor will read data from a PLC5.; Offset into the file

Driver Manual Page 10 of 12 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web :www.fieldServer.com Tel : (408) 262-2299 Fax : (408) 262-9042 Toll_Free : 888-509-1970 email : [email protected] 4.3.4. Unscheduled Map Descriptor Example The following Map Descriptor will...

Page 11 - Appendix A. Advanced Topics

FS-8700-24 ControlNet Driver Manual Page 11 of 12 Appendix A. Advanced Topics Appendix A.1. Write-throughs Some FieldServer drivers support “write-throughs”. This is the ability of a Read Map Descriptor to automatically create a temporary write Map Descriptor to update the value of an external R/W (...